topblog Ivoire blogs

16/08/2016

How to solve CAN Clip v159 RLT 2002 Probe “Failure of reservation of probe”

Here are optional user solutions for the Renault can clip v159 was connected to PC, detected with the number 926 573 and recognized " RLT2002 PROBE”, but CLIP popped an error message- "Failure of the reservation of the probe. Try it again and contact technical assistance in case of another failure” .

 

--> First, you can try the easy solution:

check in device manager, it is alliance B

yes works with both but not work on both on same partition so better to install on different computers or use the boot it.

best to install Clip first and let that update the firmware and then install Consult 3 scan tool  and enter serial you saw in Clip software , as above.

I have made it many many times .

 

--> Still not work??

That is....

You don't have a real CAN CLIP RLT2002 PROBE
You have a hybrid of Alliance VI in CAN CLIP case
It will work good don't bougter of it
It will install only one driver instead of 4 as for real CAN CLIP Probe
And much more of this it is working wit Consult III software till 9.21.02 as well

You can check and see the difference between this two kind of Chinese clones:

 

real CAN CLIP PROBE clone - RLT2002

clip_1

 

Allianbce hybrid Can Clip sonde - 926573

clip_2


This article is from the obdexpress.co.uk official technical blog:CAN Clip v159 RLT 2002 Probe “Failure of reservation of probe” (solved)

15/08/2016

How to use OPCOM for SBR warning sound status OFF

It’s aimed to help use OPCOM v1.59 to set seat belt reminder warning sound status OFF.

 

Purpose:

Op-Com set seat belt reminder war  ning sound status OFF for Opel Astra H.

 

You need:

A working OPCOM (opcom fw: v1.59 better)

 

How to setup seat belt reminder warning sound OFF in OP-COM program:

Select Astra H

opcom-aet-sbr-reminder-off-(1)

Then Body

opcom-aet-sbr-reminder-off-(2)

ADM (Airbag)

 

opcom-aet-sbr-reminder-off-(3)opcom-aet-sbr-reminder-off-(4)

Read vehicle info and then click Programming

opcom-aet-sbr-reminder-off-(5)

Program ECU

opcom-aet-sbr-reminder-off-(6)

Setup SBR warning sound status OFF

opcom-aet-sbr-reminder-off-(7)

Click Perform SBR coding

Finally, SBR configuration programmed successfully!

opcom-aet-sbr-reminder-off-(8)

13/08/2016

How to install Scania VCI 2 SDP3 v2.27 on Windows 7 32bit

Scania VCI 2 VCI 3 software has updated to Scania Diagnosis and Programmer 3 SDP3 v2.27. Here is the instruction on how to install / setup Scania VCI 2 VCI 3 SDP3 v2.27 on Windows 7 32bit operating system.

 

How to install Scania VCI 2 SDP3 v2.27 on Windows 7 32bit

Step 1 - Read read me 2.27.txt to get the installation instruction

update-scania-vci2-sdp3-2.27 (2)

Step 2 - Install AdbeRdr920_en_US.exe

update-scania-vci2-sdp3-2.27 (3)

Step 3 - Install NDP46-KB3045557-x85-x640-allOS-ENU.exe

update-scania-vci2-vci3-sdp3-2.27 (4)

Step 4 - Install vcredist_x86.exe

update-scania-vci2-vci3-sdp3-2.27 (4)

Step 5 - Install scania Diagnosis & Programmer 3 2.27.exe

update-scania-vci2-vci3-sdp3-2.27 (6)

update-scania-vci2-vci3-sdp3-2.27 (6)

update-scania-vci2-vci3-sdp3-2.27 (8)

 

Step 6 - Once finished, run x32 folder the “install.exe”

Pass: 6426758

update-scania-vci2-vci3-sdp3-2.27 (9)

When required, allow install.exe to install driver

update-scania-vci2-vci3-sdp3-2.27 (10)update-scania-vci2-vci3-sdp3-2.27 (11)update-scania-vci2-vci3-sdp3-2.27 (12)

Step 8 - Run Scania SDP3 2.27 program

Run SDP3 configuration to setup language, authentication, interface and SDP3 update

Language available: English, German, Spanish, French, Japanese, Dutch, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian.

update-scania-vci2-vci3-sdp3-2.27 (13)

update-scania-vci2-vci3-sdp3-2.27 (14)

update-scania-vci2-vci3-sdp3-2.27 (15)

update-scania-vci2-vci3-sdp3-2.27 (16)

Run SDP3

update-scania-vci2-vci3-sdp3-2.27 (17)update-scania-vci2-vci3-sdp3-2.27 (18)

Then you can use Scania VCI 2 SDP3 v2.27 or  VCI3 Scanner  to

Stored fault codes, proposals for remedial action and delete option.
Control unit configuration and settings.
Information about electrical components and their location.
Input and output signals.
Activation of components.
Spare part programming.
Circuit diagrams of the respective vehicle.
Chassis data.
User functions to meet service market requirements to work more effectively, e.g. cruise control.

 

source:http://blog.obdexpress.co.uk/2016/08/13/update-scania-vci-2-vci3-sdp3-v2-27-truck-diagnostics/

06:17 Publié dans Blog | Tags : truck diagnostic tool | Lien permanent | Commentaires (0)