topblog Ivoire blogs


MINI ND900 & TOYO OBDII Program Toyota 72G Chip All Key Lost


To deal with Toyota G chip all lost.



Program new keys by TJECU MINI900 with TOYO KEY-OBD is the best choice which will save you tons of money and time. Following is step-by-step guidance.


Insert TOYOKRY-OBDII to 16pin diagnostic socket


mini-nd900-toyo-obdii-program-toyota-72g-chip-all-key-lost-1 mini-nd900-toyo-obdii-program-toyota-72g-chip-all-key-lost-2

Go to function mene, Click “OBDII Comm.”


Choose “ID72(G) IMMO reset”, waiting…


Then insert the key into the ignition switch and turn ignition to ON

Make sure TOYOKEY insert to OBDII

Then click OK to continue


mini-nd900-toyo-obdii-program-toyota-72g-chip-all-key-lost-5 mini-nd900-toyo-obdii-program-toyota-72g-chip-all-key-lost-5

It is searching TOYOKEY


MINI ND900 has connected with TOYOKEY by Bluetooth


Pull the key out of the ignition switch and click OK


Then insert the key into the ignition switch and click OK


Following the prompts

Pull out the key, click OK

Insert the key, click OK


Success! The first key has been programmed by MINI ND900


Then begin to program another keys

Insert the second key, the security light will flash, then pull it out


When finish add key pattern, turn ignition switch on-off 5 times and start the ignition



How to do VW Polo 2012 all key lost by JMD assistant & Handy baby

Something interesting here… JMD assistant obd adapter and Handy Baby key programmer solved the all key lost issue of VW Polo 2012 with 4th immobilizer system; that is, JMD assistant and handy baby can do all key lost for Polo 2012.


This is the new obd adapter JMD assistant


And the JMD48 chip, and the key to be programmed


Insert the key to switch and put the chip close to it


The dashboard status


Then remove the JMD48 chip away


Connect the JMD assistant adapter to the OBD port under the dashboard


The dashboard status


Disconnect the JMD assistant and put it on the coil of the Handy baby


Chip transfer


Chip generate and authorize


Insert the key and turn to II


JMD adapter collect data


Data collection success and put the JMD48 chip


Copy by JMD48 chip push OK




Copy data success!


Test it on the car and it’s working.


jmd-assistant-handy-baby-do-all-key-lost-17 jmd-assistant-handy-baby-do-all-key-lost-18



The tutorial is very clear to learn.



Xhorse VVDI2 V1.2.6 software

Xhorse VVDI2 V1.2.6 software download info details at here.


xhorse-pro-vvdi-2-ii-key-programmer-1 xhorse-pro-vvdi-2-ii-key-programmer-2 xhorse-pro-vvdi-2-ii-key-programmer-3


Free Download Xhorse VVDI2 V1.2.6 in mega:!3sZjVSzT!8q-KRpJ2q-UG5qcY8RlAZQ_IGegvMF...
(no password needed)


How to install software and driver?
Update info:
===== VAG V1.2.6 =====
1. Support copy 48 transponder, without binding condor(Menu->Key Learn->4th Immobilizer system – Copy 48 Transponder)
About copy 48 function on VVDI2:
(1). Authorize copy 48 function require 1000 remote points, require buy an extra emulator
(2). You can exchange it with “Transponder Programmer -> Menu -> Points System”
(3). Every success calculate will cost 100 remote points
(4). Copy 48 fucntion use in 4th immobilizer system(Dashboard), support type: NEC24C32, NEC24C64, NEC24C64 colordisplay, A1, A3/TT/R8, Q3, New tiguan 5ND920873B, 5ND920883B etc
(5). Copy 48 fucntion can work on the car that which support read PIN and CS via OBDII. Ofcourse, known CS and PIN is supported. Support make new key, support add keyless GO keys, especially support lost all key。 For Passat B6/CC only support clone 48 transponder(must have working key), don’t support 46 transponder, dont support keyless Go, dont support lost all key

1.About points on VVDI Key TOOL, you can combine to your VVDI2 device and used in VVDI2
In future, points will have more power function, save as more as you can!
2. Fixbug for old A6/Q7 J518 read EEPROM bug
3. Bugfix
===== BMW V1.2.6 =====
1. Bugfix

===== Porsche V1.2.6 =====
1. Bugfix

===== PSA V2.0.7 =====
1. Bugfix

===== Transponder Programmer V1.2.6 =====
1. Points system: Fixbug for verify sub-remote pcb status
2. Bugfix


Note: More functions we are still testing, it will be released next version.