topblog Ivoire blogs

05/09/2016

How to get clone VAS 5054A ODIS of high quality?

This is a reliable buying guide of clone high-quality (HQ) VAS 5054A scanners from China. HQ 5054a could be identified from PCB design, including board colour, Bluetooth module and OKI chip.

 

1- distinguish from board colour

There are mainly three kinds of VAS 5054A scanners in China, with three different printed circuited boards- green 5054a PCB, blue and white PCB, displayed as follows:

vas5054a-green-blue-pcbvas5054a-white-pcb

The green 5054A hardware stands out among the three ones, tested by thousands of users without any issue when diagnosing or modifying.

 

* Reference: How to tell printed circuited board (PCB)?

 

 

2- differ from Bluetooth module

You can see two types of Bluetooth modules in the markets:

Bluetooth A:

AMB2300 chip – it’s Bluetooth v4.0 module usually in vas 5054a (better in Bluetooth performance)

Bluetooth B:

it’s Bluetooth v2.0 module, usually in 5054 plus

5054a-bluetooth module-A-B

High quality VAS5054A with Bluetooth AMB2300 module

vas-5054a-bluetooth-amb2300

Normal 5054 plus scanner with ordinary Bluetooth module

5054-plus-bluetooth

Note: not all 5054a scanners come with Bluetooth module; but you can add it yourself if equipped with knowledge and technique.

It’s customer share

bluetooth-module-for-5054a

5054q-add-bluetooth-module

 

3- tell from OKI chip

OKI Chip is an important component that it can support USD protocol for old cars.best-quality-vas-5054a-pcb-board-2

The newly designed 5054a can support UDS and PWM protocols for new and old VW, AUDI, Skoda, Seat cars.

 

 

Conclusion:

So, combined with all good components, a high-quality VAS 5054A scanner should be designed with an AMB2300 Bluetooth module and OKI chip in a green board, verified to run well with ODIS 3.0.3 software.

 

5054a-hardware-15054a-hardware-25054a-hardware-3

best-clone-5054a-scanner-1best-clone-5054a-scanner-2best-clone-5054a-scanner-3best-clone-5054a-scanner-4

Original:http://blog.obdexpress.co.uk/2016/09/04/high-quality-vas-...

02/09/2016

How to install VAS 5054A ODIS software on Windows 8 64 bit

China VAS 5054A software ODIS service, new 3.0.3 version or old 2.2.3 version, usually runs well on most Windows XP or Win 7 system. And nowadays, users has verified that ODIS also can be installed on Windows 8 operation system.

 

Here is what the user said:

 

Have just installed Odis 2.0.2 onto win 8.1 X64 with no problems and connected to our 2002 Audi A4 avant with a clone 5054a diagnostic interface.

Only thing i found is to use Windows 7 or Win xp sp3 compatibility mode on setup in OffboardDiagLauncher Properties, and to make a shortcut from the actual launcher in "C: Program Files (x86)" and place on desktop, run ODIS program as Administrator. After this, the program will run. It's tested with the vehicle, and it's working fine!
Did not use the Bluetooth just the USB cable and all working.

Reference:  How to install 5054A ODIS 3.0.1 on win 7

 https://youtu.be/4XJewLAx4U0

SOURCE:http://blog.obdexpress.co.uk/2016/09/02/install-vas-5054a-odis-software-on-windows-8-64-bit/

01/09/2016

(solved) ElsaWin v5.2 error “no license for this version”

ELSAWIN 5.2 Electronic Service Information usually can work well on Win2000, WinNT, Windows XP operation systems, but should it work on Windows 10 system? “Definitely yes!” said ElsaWin users.

 

Some users feedback on their ElsaWin installation failure on Win 10, with it saying “Der er ikke licens til denne version!” (English: You don’t have license for this version.)

elsawin-license-error

 

Here are two user solutions. Wish this helps!

 

– Solution from vagvag:

Just run the Elsawin Administator with admin/admin and enter again your license key (services>code>code request) that you loosed with the classic Elsawin keygen

 

– Solution from garagemand:

I made a reinstall of ELSA on Windows 10, and that works.

I have install following items:
SetupCD 4.00
UpdateCD 4.10
Base 01.2014
Try to update with following, but didn’t have any success
Elsa_50_Upd_Setup.exe
Elsa_52_Upd_Setup.exe
6.Base_01.2015 has no setup.exe

 Original:http://blog.obdexpress.co.uk/2016/09/01/setup-elsawin-v5-...