topblog Ivoire blogs

16/06/2018

Merceders-benz A-class W169 Cluster Calibrate With OBDSTAR Key Master DP

OBDSTAR X300 DP Key Master BENZ newest software V30.29 can do mileage adjustment on A-Class w169 and w176,This is the introduction manual of how to do mileage corretion on Merceders-benz A-class W169 via OBD,this manual also  work for W176.

Video Tutorial:

In words:

Purpose: OBD odometer correction for aMerceders-benz A-class W169
Tool used: Obdstar X300 DP 
How-to’s: How to use Obdstar X300 DP to adjust Merceders-benz A-class W169 mileage through OBD

Step1: Prepare

Connect X300 DP with vechile and open X300DP

X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-1

On main menu, click “Diag Program”, choose “Cluster Calibrate” function and car maker “BENZ”.

X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-2

X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-3

Go to newest BENZ software V30.29. Choose “A-Class” and “W169”.

X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-4 X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-5 X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-6

After that it read out old odometer value as 5007 click “OK"button to input a new value.

X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-7 X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-8

Now time to input a new mileage. In this case, enter 2000

X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-9 X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-10 X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-11 X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-12 X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-13

Adjustment success! Using OBDSTAR X300 DP pad successfully change Merceders-benz A-class W169 dashboard mileage from old 5001 to new 2000!

X300-dp-key-master-odometer-correction-on-mercedes-benz-a-class-w169-14

Done!

Src:

http://www.mileageprogrammer.com/x300-dp-change-km-on-w169/

10/05/2018

How to use CarProg for Audi A3, TT, R8 dashboard 2010+

Here, i’d like to share a tutorial released by codecard.eu. It’s for the educational purpose only.

Car: Audi A3, TT, R8 2010+

Purpose: read/write EEPROM, change odometer, read/write immo data for key programming or dashboard cloning

Optional tools: Carprog copy version or genuine, or VVDI2 Xhorse

Tutorial:How to get CarProg to work for Audi A3, TT, R8 (2010+):

 
  • CarProg changes mileage in the car by OBDII:

Connect CarProg with A1 adapter to car OBDII.

Load A3/TT 2009-2011 OBDII software. Switch ignition ON.

Push “Prepare Unlock Dump” – odometer will be reseted to 0km.

Push “Change KM”

CarProg will show 0km

Enter new odometer value and push “OK”

Odometer correction is complete!

 

  • CarProg adds new key (if one working key exists):

connect CarProg with A1 adapter to car OBDII.

Load A3/TT 2009-2011 OBDII software.

Switch ignition ON.

Note original odometer value. Push “Prepare Unlock Dump”.

Odometer will be changed to 0km.

Swich ignition OFF.

 

  1. Remove dash from car and read EEPROM 24C32 manualy (using CarProg EEPROM software);
    2. Save this EEPROM dump;
    3. Put dash back to car and connect via OBDII again;
    4. Press button “Load unlock dump” and load saved eeprom file.
    5. Now you can read IMMO file with button “Read immo”
    6. Save this immo file;
    7. Load VAG KEY software;
    8. Open immo file, put transponder to the Carprog A3 antena and press write button;
    9. Choose new key possition and save new immo file;
    10. Load A3/TT 2009-2011 OBDII software;
    11. Press button “Load unlock dump” and load saved EEPROM file again. Load new immo file with “Open” button.
    12. Write immo file with “Write immo” button. Write old odometer with “Change KM” button
  • CarProg programs new keys when all keys are lost (IMMO IS ACTIVE):
  1. Remove dash from car and read eeprom 24C32 manualy (using CarProg EEPROM software);
    2. Save this EEPROM dump to have backup;
    3. Fill EEPROM dump range 0x812 – 0x9BF in hex editor with FF FF … ;
    4. Write this damaged dump to EEPROM;
    5. Put dash back to car and connect via OBDII again; Cluster display will show “Error”;
    6. Push “Prepare Unlock Dump”; Odometer will reset to 0km;
    7. Remove dash from car and read EEPROM again 24C32 manualy (using CarProg EEPROM software)
    8. Save this eeprom dump (THIS ONE WILL BE UNLOCK DUMP FILE);
    9. Put dash back to car and connect via DIAG now( Load A3/TT 2009-2011 OBDII software);
    10. Press button “Load unlock dump” and load saved UNLOCK DUMP file;
    11. Load your saved backup (original eeprom) and press write;
    12. Now you can read IMMO file with button “Read immo”;
    13. Save this immo file;
    14. Load VAG KEY software;
    15. Open immo file, put transponder to the Carprog A3 antena and press write button;
    16. Choose new key possition and save new immo file;
    17. Load A3/TT 2009-2011 OBDII software;
    18. Press button “Load unlock dump” and load UNLOCK DUMP file again. Load new immo file with “Open” button.
    19. Write immo file with “Write immo” button. Write old odometer with “Change KM” button

carprog-audi-a3-2010

 

NOTE: you could change km and program new keys with CarProg original. With CarProg HQ china clone, you can change km but need luck with key programming.

 

For VAG immo, Xhorse VVDI2 is the best option.

VVDI2 VAG 5.3.0 supports Audi A3, TT, R8 dashboard Micronas CDC3217/3297+24C32

 

 

vvdi2-audi-a3-dashboard

 

 

 

http://blog.obdexpress.co.uk/2018/05/09/carprog-for-audi-...

How to use CarProg for Audi A3, TT, R8 dashboard 2010+

Here, i’d like to share a tutorial released by codecard.eu. It’s for the educational purpose only.

Car: Audi A3, TT, R8 2010+

Purpose: read/write EEPROM, change odometer, read/write immo data for key programming or dashboard cloning

Optional tools: Carprog copy version or genuine, or VVDI2 Xhorse

Tutorial:How to get CarProg to work for Audi A3, TT, R8 (2010+):

 
  • CarProg changes mileage in the car by OBDII:

Connect CarProg with A1 adapter to car OBDII.

Load A3/TT 2009-2011 OBDII software. Switch ignition ON.

Push “Prepare Unlock Dump” – odometer will be reseted to 0km.

Push “Change KM”

CarProg will show 0km

Enter new odometer value and push “OK”

Odometer correction is complete!

 

  • CarProg adds new key (if one working key exists):

connect CarProg with A1 adapter to car OBDII.

Load A3/TT 2009-2011 OBDII software.

Switch ignition ON.

Note original odometer value. Push “Prepare Unlock Dump”.

Odometer will be changed to 0km.

Swich ignition OFF.

 

  1. Remove dash from car and read EEPROM 24C32 manualy (using CarProg EEPROM software);
    2. Save this EEPROM dump;
    3. Put dash back to car and connect via OBDII again;
    4. Press button “Load unlock dump” and load saved eeprom file.
    5. Now you can read IMMO file with button “Read immo”
    6. Save this immo file;
    7. Load VAG KEY software;
    8. Open immo file, put transponder to the Carprog A3 antena and press write button;
    9. Choose new key possition and save new immo file;
    10. Load A3/TT 2009-2011 OBDII software;
    11. Press button “Load unlock dump” and load saved EEPROM file again. Load new immo file with “Open” button.
    12. Write immo file with “Write immo” button. Write old odometer with “Change KM” button
  • CarProg programs new keys when all keys are lost (IMMO IS ACTIVE):
  1. Remove dash from car and read eeprom 24C32 manualy (using CarProg EEPROM software);
    2. Save this EEPROM dump to have backup;
    3. Fill EEPROM dump range 0x812 – 0x9BF in hex editor with FF FF … ;
    4. Write this damaged dump to EEPROM;
    5. Put dash back to car and connect via OBDII again; Cluster display will show “Error”;
    6. Push “Prepare Unlock Dump”; Odometer will reset to 0km;
    7. Remove dash from car and read EEPROM again 24C32 manualy (using CarProg EEPROM software)
    8. Save this eeprom dump (THIS ONE WILL BE UNLOCK DUMP FILE);
    9. Put dash back to car and connect via DIAG now( Load A3/TT 2009-2011 OBDII software);
    10. Press button “Load unlock dump” and load saved UNLOCK DUMP file;
    11. Load your saved backup (original eeprom) and press write;
    12. Now you can read IMMO file with button “Read immo”;
    13. Save this immo file;
    14. Load VAG KEY software;
    15. Open immo file, put transponder to the Carprog A3 antena and press write button;
    16. Choose new key possition and save new immo file;
    17. Load A3/TT 2009-2011 OBDII software;
    18. Press button “Load unlock dump” and load UNLOCK DUMP file again. Load new immo file with “Open” button.
    19. Write immo file with “Write immo” button. Write old odometer with “Change KM” button

carprog-audi-a3-2010

 

NOTE: you could change km and program new keys with CarProg original. With CarProg HQ china clone, you can change km but need luck with key programming.

 

For VAG immo, Xhorse VVDI2 is the best option.

VVDI2 VAG 5.3.0 supports Audi A3, TT, R8 dashboard Micronas CDC3217/3297+24C32

 

 

vvdi2-audi-a3-dashboard

 

 

 

http://blog.obdexpress.co.uk/2018/05/09/carprog-for-audi-...