topblog Ivoire blogs

06/12/2016

WIFI VXDIAG VCX NANO For Land Rover Jaguar Support All Protocols

New arrival at obdexpress.co.uk,WIFI VXDIAG VCX NANO For Land Rover Jaguar Support All Protocols with Chuwi Hi10 Tablet.Here is the details.

– Fully Replacement of OEM tool of SPX VCM and i-VIEW

– Support all protocols of Land rover and Jaguar

– Support both Diesel and gasoline cars

– Support WIFI Connection

 

VXDIAG VCX NANO for Land Rover and Jag uar Vehicle List: 

Support 2005 to 2014 year vehicles of Jaguar and Land Rover

Support L316, L319, L320, L322, L359, L405,L494, L550, L538 Land Rover Vehicle Lines

Support X100, X150, X152, X202, X250, X350, X351, X400 Jag uar Vehicle Lines

 

Multi-languages:

English/ Japanese/ Portuguese/ Romanian/ Korean/ Dutch/ Polish/ Turkish/ Spanish/ French/ Italian/ Croatian/ Danish/ German/ Swedish/ Finnish/ Slovenian / Czech/Russian/ Greek/Chinese

 

Update:

Free Update VXDIAG VCX NANO by CD as long as we have the newest version of software, without firmware locked

 

What you can use it to do?

  1. Data Lists
  2. Active Tests
  3. Monitor
  4. Utility tests
  5. Reprogramming
  6. Diagnostics Trouble Codes

 

Here is product display, you can see the Tablet is as big as 10 inches.

1pc x VXDIAG VCX NANO Main Unit

1pc x USB Cable

1pc x Carry Case

1pc x The tablet

1pc x The power supply

wifi-vxdiag-vcx-nano-for-land-rover-jaguar-1 wifi-vxdiag-vcx-nano-for-land-rover-jaguar-2 wifi-vxdiag-vcx-nano-for-land-rover-jaguar-3 wifi-vxdiag-vcx-nano-for-land-rover-jaguar-4 wifi-vxdiag-vcx-nano-for-land-rover-jaguar-5

 

4 Reasons You Trust and Order from obdexpress.co.uk

#1. Product is manually tested for working condition before shipping: No dead-on-arrival situations.

#2. Future software updates: If update comes out, you won’t be left in the dark. We’ll immediately give you the update link or instructions. So your tool will always be up to date with current date. Pls focus on blog.obdexpress.co.uk.

#3. You will get the fastest delivery speed.

#4. You will get the Best Price of our products.

05/12/2016

How to build a Power Supply for BMW ICOM

Best way “I” would build a power supply for icom bmw, buy OBDII Extention, Go to your local salvage place and buy BMW OBDII+20 Pin plug+wires(cut)
Then buy power plugs (male and female) from your local electric store and DIY your final product to this forum how much it cost you at the end

 

This is BMW ICOM A2 OBD+20pin cable

icom-a2-obdii20pin-connector

Icom 20pin to 16pin cable

 

 

icom-a2-16pin-to-20pin-cable

16pin J1962 obd2 car proprietary connector at bmw

icom-a2-16pin-connector

used in all BMW models produced after 2000’s

 

PIN Signal Description
pin 1 +12v ignition (in run or start)
pin 4 CGND chassis ground
pin 5 SGND signal ground
     
pin 7 ISO 9141-2 K-line engine (iso-914 ans iso-14230), automatic transmission diagnostic (in some models)
pin 8 ISO 9141-2 K-line ike/kombi, abs, abs/asr, abs/abd, esp, dsc, airbag and other diagnostic equipment
pin 9 TD/RPM engine rotation speed
pin 15 ISO 9141-2 K-line k-line of iso 9141-2 and iso 14230-4
pin 16 +12v battery power

 

Pinout status: +0 / -0

 

20pin car proprietary connector at the car side

icom-a2-20pin-connector

used in all BMW models in 1988-2000’s

PIN Signal Description
pin 1 engine rotation speed TD
pin 2 OBDII diagnostic  
pin 7 oil service and inspection reset  
pin 11 external starter turn on  
pin 14 battery power  
pin 15 ISO 9141-2 L line RXD- Diagnostic data link
pin 16 ignition +12v  
pin 17 USI 8141-2 k line n/c?
pin 18 PGSP Programming line  
pin 19 GND  
pin 20 ISO 9141-2 K line TXD- Diagnostic data link

 

Pinout status: +6 / -1

 

http://blog.obdexpress.co.uk/2016/12/02/power-supply-for-...

02/12/2016

VVDI2 VAG prepare new dealer key for 5th immo vag

It’s vvdi2 manual of how to use VVDI2 VAG to make a dealer key for vag vehicles with the 5th immobilizer system.

 

Type: VAG 5th immo transponder or OEM key

 

Cars: A4 (2009-), A5, Q5, A6 (2012-), A7, A8(2011-), Touareg (2011-)

 

 

If you want prepare a new dealer key, you must know the total 16 bytes CS. So we need read BCM2 data from BCM2 module (J393)

 

Step 1: Choose a method to read BCM2 data

so far, most cars support read BCM2 data via OBDII (Add key and lost all key all support). (No. 1), read BCM2 need enter service mode, the cluster may become dark under reading.

 

Useful tips:

– Error “read data length error” in OBD read method:

you need read BCM2 data with 5th BDM Programmer (No. 2)

 

– OBD Read BCM2 for lost all key:

It need disconnect BCM2 power (2 interfaces) for a few seconds. Just follow program message

 

– Fail to read BCM2 data:

Under OBD Read BCM2 for lost all key process, if cannot read BCM2 data after disconnect power or you get disconnect power for next time read, this type may not support OBD read without working key, you need read BCM2 data with 5th BDM Programmer

 

– switch OFF or ON:

Before you read BCM2 via OBDII, you’d better switch OFF/ON ignition again, Keyless cars press START/STOP button again to switch ON. Else may enter lost all key mode, of course, if reading success, it is also right BCM2 data

 

– How many times to read BCM2 data:

BCM2 data is always for the same car. So you only need read one time. As long as you have the BCM2 data, you don’t need to read again, no matter key learn, no matter when

 

 

BCM2 (J393) module position

bcm2-j393-module-position

 

BCM2 (J393) module remove plug

bcm2-j393-module-remove-plug

 

introduction for 5th BDM Programmer

introduction-for-5th-bdm-programmer

 

BCM2 (J393) front connect line

bcm2-j393-front-connect-line

 

BCM2 (J393) back connect line

bcm2-j393-back-connect-line

 

 

Step 2 – Verify key lock status with the “Check Key Status” button (No. 3)

Check key is locked or not, is keyless key or not. For there are many OEM keys on the market, keyless key result may not accurate

 

Step 3 – Make Dealer Key (No. 4):

Click on “Prepare dealer key”

Request load BCM2 data (step 1)

Put the programmable key into VVDI2 key programmer

Prepare the dealer key and wait complete

 

Useful tips:

– key is locked:

After making key successfully. The key is not locked before you learn it. So you can make key for other cars before key learning. Once learn the key, it locked

 

– need a working key or not:

Make key for A4/Q5/A5 don’t need a working key

Make key for A6/A7/A8/Touareg need a working key

(if you don’t have working key, the keyless function will not work )

 

– make OEM keys:

You can unlock the locked OEM key in “Transponder Programmer->Other Key Tool”. (Most OEM keys is not support unlock, it can be prepared again with lock status, then learn it as normal). If the OEM keys support change ID, you can make an OEM key, the method is same as 4th immobilizer cluster OEM key, select one original key position and continue

 

Step 4 – key learning through VVDI2 VAG (No. 5)

Connect the VVDI2 VAG commander to the car,

Prepare all the key for this car

Insert one key to the switch ignition

Input the key number you want to learn

Click on “key learning”

Request load BCM2 data (step 1)

Complete the key learning

 

At the last, you will get a message insert every key to learn, don’t press “OK” until you get message “Learn key success” at the bottom. If you press “OK” before that message will cause key learn failure. When you get that message, the cluster will show “x-y”, “x” is the learned key number and “y” is the total learning number. If you learn 2 keys, first will show 0-2, after learn 1 key, it show 1-2, after learn 2 keys, it show 2-2. After success learn key, it will show KM

 

Step 5 – Alarm ON:

Open the immobilizer alarm, you are advised to open it after key learn

 

Step 6 – Alarm OFF:

Close the immobilizer alarm