topblog Ivoire blogs

08/04/2017

How To Install FGTech Galletto V54 correctly with Win 7

Here is our customer experience of how to install FGTech Galletto V54 correctly with Windows 7

(Big thanks to Mr.Tim Thiessen ,good info to share with  FGTech Galletto users in obd2express.co.uk)

 

Here is the error when he was installed the FGTech Galletto V54 on Windows 7

FGTech-Galletto-V54-install-on-win7-error

 

Solution :

Hello, I would like to explain to you step by step how to install your FGTech Galletto V54 correctly with Windows 7. To do this, you must first uninstall the already installed software and the drivers.

Then we start with step:

1. Run “FGTech Galletto Edited v1.0.exe” as an administrator. Important: Do not create a desktop icon and run the program yet.

2. Next, connect the Galletto device to the power supply and then connect it via USB. The automatic driver installation fails. But do not worry, the installation is done manually.

3. Right-click on the “Computer” icon and select “Manage”. As soon as the window opens, click on Device management and select the USB port “FGTech”. Here you have to click “Update driver software”. And then click “Browse the computer for driver software”, then “Select from a list of device drivers on the computer”, then “Have Disk” and “Browse”.

4. Now look for the folder of “FGTech” on drive C. Here you open the folder “fgtech_new_driver” and select the following file: “fgtibus.inf”! Confirm everything, wait for the installation, and close all windows.

5. Run “FGTech Galletto Edited v1.0.exe” again as an administrator. Important: Do not create a desktop icon and run the program yet.

6. Run “Galletto win7.exe” as administrator. Create and install the desktop icon. If the installation is complete, start the program as an administrator.

7. Ignore the next two windows with hints and confirm with OK. FINISHED!!!

Hopefully this guide is understandable.

07/04/2017

How to solve Kess V2 “Protocol not compatible with version FW”

I also solved the problem with Kess v2 clone, with error “Protocol not compatible with version FW”. Now the error no longer appears. Cheers!

 

 

The error message: “Protocol not compatible with version FW”

 

Systems can be: Windows 7 and Windows XP….both OK

 

Here are the instructions:

Solution for Kess v2 FW protocol error

 

Here, I would like to show you step by step how to use your Kess v2 without the error “Protocol not compatible with version FW”.

 

To do this, you first have to uninstall the already installed software and the drivers.

 

Afterwards we start with step:

  1. Disable Internet connection
  2. Install the K-Suite 2.06 Full Version including drivers (Microsoft Visual C ++ 2005 SP1 and USBDEVICEDRV 1.00.011). The Kess device is not yet connected to your computer.
  3. After successful installation, K-Suite will open automatically (no error message may occur during installation, otherwise you will have to repeat the installation). Select the desired language and exit the program.
  4. Now you have to connect the Kess device via USB and wait for the automatic driver installation. (K-Suite not yet opens)
  5. Right-click the K-Suite icon to open the file path. (Win-XP: right-click on the K-Suite icon, then open the properties, in the lower left you can open the file path) Marks the entire content in the folder and deletes it.
  6. Opens the “Token Reset Folder” and copies the entire contents (it is the data from K-Suite 2.08). Now you change back to the already installed file path (here you just deleted all files) and insert the copied records. In addition, you copy the help folder (can be found on the supplied CD) and also paste it into the already installed file path. Now you can close all windows and start K-Suite.

 

The Kess device will now be updated. This may take a little time. As soon as the main menu of K-Suite opens, version 2.08 should be visible. The message “Protocol not compatible with version FW” should no longer appear. If everything was successful, you can close K-Suite again and install the updates (2.10, 2.12, … etc) one at a time. The Kess device can remain connected to the computer. The important thing is that you only install the updates. Not the drivers (Microsoft Visual C ++ 2005 SP1 and USBDEVICEDRV 1.00.011).

 

PS: If the error message “External exception EEFFACE” appears, you must close the program. Now disconnects the Kess device, reinstalls the version at which this error occurred. This time with the USBDEVICEDRV 1.00.011, but without Microsoft Visual C ++ 2005 SP1. After installation reconnect the Kess device and start K-Suite.

 

I currently have the version 2.32 Ksuite, and it works perfectly.

Hopefully this guide is understandable.

 

 

(BIG THANKS to the contributor; good info to share with kess v2 users in OBDexpress.co.uk)

06/04/2017

SDconnect C4 Wlan Error 2 Solved: Reset IP address

I have bought a Chinese SD Connect C4 MUX. Connected via the green LAN cable everything is working great on a EVG7 tablet with SSD and 2017.3 Xentry.

 

Problem is i cannot get the wireless working.

MUX display WLanError 2 , and the Wlan mac id is blank on the unit.

 

the Wlan Error2

sdconnect-c4-wlan-error-2-message-2

see the screenshots

 

sdconnect-c4-wlan-error-2-message-1 sdconnect-c4-wlan-error-2-message-2 sdconnect-c4-wlan-error-2-message-3

Here is a solution…tested OK by professionals.

 

RESET LAN & WLAN IP address as follows:

 

On Desktop, right click to go to Personalize

sdconnect-c4-reset-ip-1

Control Panel-> Network and Internet-> Network and Sharing Center

sdconnect-c4-reset-ip-2 sdconnect-c4-reset-ip-3

Network Connection-> Local Area Connection 2 Properties-> Internet Protocol Version 4 (TCP/Pv4) Properties

Use the following IP address:

IP address: 172.29.127.119

Subnet mask: 255.255.255.0

sdconnect-c4-reset-ip-4

Change adapter settings

sdconnect-c4-reset-ip-5

Network Connection-> Wireless Network Connection 3 Properties-> Internet Protocol Version 4 (TCP/Pv4) Properties

Use the following IP address:

IP address: 192.168.2.110

Subnet mask: 255.255.255.0

sdconnect-c4-reset-ip-6

 

Open Road24h Ad-Hoc Connector for C4 Mux

Click on -1- Make Roard24h Ad-hoc Profile, then OK

sdconnect-c4-reset-ip-7

Click on -2- Connect to MUX via Road24h, then OK

sdconnect-c4-reset-ip-8 sdconnect-c4-reset-ip-9

Road24h now is connecting

sdconnect-c4-reset-ip-10

 

Open Administration

SDconnect Toolkit

Information

sdconnect-c4-reset-ip-11

Register/Configure

Setup Encryption: WEP/ Hex

sdconnect-c4-reset-ip-12

Enter the key

sdconnect-c4-reset-ip-13

Copy the key as the network security key

sdconnect-c4-reset-ip-14

Start

sdconnect-c4-reset-ip-15

Road14h is connected

sdconnect-c4-reset-ip-16

The network location is now Work

sdconnect-c4-reset-ip-17

SDconnect Toolkit Preview

sdconnect-c4-reset-ip-18

 

 

It’s working!

 

Xentry/DAS can be used via WIFI.

http://blog.obdexpress.co.uk/2017/04/06/sdconnect-c4-wlan...