topblog Ivoire blogs

13/04/2017

(€210 saved)Allscanner VXDIAG A3 = ICOM A2 + 5054A odis + JLR SDD v148

€210 saved to get the new Allscanner VXDIAG A3 scan tool can be used as a full diagnostic & programming tool for BMW, Volkswagen, Audi, Skoda, Bentley, Lamborghini , LAND ROVER &JAGUAR.

ALLSCANNER VXDIAG A3 Support BMW LAND ROVER & JAGUAR and VW with 500GB Hard Drive

 

 

 

 

 

 

So, SAVED €210.99 with a VXDIAG A3 diagnostic tool!

 

Here comes the question.

 

Can VXDIAG A3 can perform as well as ICOM A2, Vxdiag vcx nano 5054 & JLR SDD 145? No issues in basic diagnostic test, coding, ecu programming and key programming?

 

Yes! Vxdiag A3 can perform diagnostic test (read live data stream, fault codes..), actuation test, monitoring, utility testing,reprogramming, ecu programming, coding, key programming, though USB/ WIFI / wired cable, in multilanguage: English / Japanese / Portuguese / Romanian / Korean / Dutch / Polish / Turkish / Spanish / French / Italian / Croatian / Danish / German / Swedish / Finnish / Slovenian / Czech / Russian / Greek / Chinese

 

 

 

  1. VXDIAG A3 for BMW

The new BMW software can perform programming and coding for all BMW E/ F/ G series cars, same as BMW ICOM A1 / A2 / A3. Very good at fiber programming.

 

The main diagnostic software includes:

Diagnosis: ISTA-D v40.01.21

Programming: ISTA-P v3.59.4.004

BMW Group ISPI (the fourth generation of BMW diagnostic software client);

E-SYS (Engineer Software for F series, available for programming, coding, Chinesization, realize hidden functions, advanced features);

WINKFP (for E series: programming, upgrade and downgrade);

Tool32 (enter key, import codes, delete certification, advanced features of BMW series);

INPA (read vehicle information, diagnosis, read and clear trouble codes);

BMW Coding (for E series: import data, change the code or realize hidden functions);

KSD2 (offer full vehicle repairing information for diagnosis or programming);

NCS-Expert tool (for E series: set codes, realize hidden functions and change settings);

BMW software includes the engineer version, which is the quick and easy diagnostic programming and coding system that German BMW engineers are using. The system is designed in English and German. The Engineer version is so practical and powerful that it can achieve professional features which all the original professional computers can realize, can change the language into Chinese through the OBD port for import cars (Europe regulation cars, the United States and the United States, Africa, etc.). Features mainly include: diagnosis, programming (incl. programming one module only), coding, realize hidden function, new features activation, the module system update.

 

Following functions can be activated based on the existing configuration model:

01 use the button in the cab to close the trunk (electric tailgate), to terminate the reverse operation at any time (available in cars with the electric tailgate)

02 activate the Bluetooth phone function, to automatically play the music inside the phone every time you start the car. (Available in models with a USB port in the armrest box or gear)

03 support audio and video playback via USB cable as well as via iPod.

04 connect to the phone through the Wi-Fi (mobile phones are required to install software)

05 open the voice recognition function (currently only available in English digital telephone dialing)

06 operate the navigation menu when driving, watch DVD (Even the original car is available with CD, you can also watch DVD)

07 Active internet applications (available in post 2012.09 models with professional navigation, but some unsupported with unclear reasons)

08 immediately fold the rear-view mirror with the remote control (for the original car, owners need to press the lock key for 1.5 seconds)

09 activate gearbox program on the sport cars, at a quicker response for speeding up. But it will cause fault codes in ECU test in the 4S shop. (NOT recommended)

10 effectively prevent rear-end collision because brake lights flash quickly when braking severely (for 3 Series 5 Series, testing)

11 use mobile phone traffic to surf the Internet on iDrive via the phone Bluetooth (not tested yet)

12 adjust the warning speed of changing a lane (available in high-end cars with the rearview mirror with the dead angle warning indicator) (not tested yet)

13 automatically released the handbrake (parking button) when the vehicle is started (testing)

14 add the lane departure system and roadside warning identification function (available in optional cars with front cameras) (not tested yet)

15 L7 around Sound Pro

Personalized Customization

  1. Set Seat Belt Alarm time (second/sec)
  2. Disable passenger Seat Belt Alarm
  3. Disable driver Seat Belt Alarm
  4. Set the engine on/off status the same as that before the ignition off or the default status off.
  5. Set the central lock automatically unlock when ignition off
  6. Set Fuel Economy Mode as default mode after ignition on
  7. Enable roll up window when open car door
  8. Enable the option of DRL (Day Running Lights) on or off.
  9. Set Highlight auxiliary and intersection traffic light “Automatic”
  10.  Enable to adjust DRL brightness (the default factory setting is brightest)
  11.  Set fog light turn on while headlight is on
  12. Enable to Lock/Unlock sound  and adjust the volume
  13.  Enable auto close sunroof when raining (May lead to initialize sunroof, it will work only after ignition on for 10 seconds, not very effective.)
  14.  Set windshield wiper Back in place when ignition off
  15. Set sunroof automatically close in a tilted state (It needs to initialize sunroof)
  16. Set the turn signal light on/off times (F30)
  17.  Enable CIC menu display CI version
  18.  Three Bluetooth phone rings available
  19.  Enlarge phone number and text storage (25 to 50)

 

A/C (Automatic Air Conditioning)

20.  Set indoor internal circulation memory the same as that when the ignition off last time.

  1. Set air conditioning memory the same as that when ignition off last time.
  2.  Display engine output power and torque on navigation screen
  3.  Cancel home screen boot delay confirm message
  4.  Cancel rear view camera statement when reversing
  5.  Display available gas station on navigation
  6. Display speed limit info (Need hardware support)
  7. Display engine torque menu
  8. Auto headlight
  9. TPMS
  10. Display tire pressure and temperature (Need hardware support)
  11. Adjust mile to kilometer
  12. GPS time synchronization
  13. Dashboard stimulate instant fuel consumption: change from 20 to 30
  14. Enable dashboard light on always
  15. Enable dashboard light always on at night (For BMW 535, GT, 7 series and part of BMW 530)
  16. Enable dashboard light always on at daytime (For BMW 535, GT, 7 series and part of BMW 530)
  17. Enable dashboard lights turn grey (For BMW 535, GT, 7 series and part of BMW 530)
  18. Enable dashboard lights turn orange or grey (For BMW 535, GT, 7 series and part of BMW 530)
  19. DS Mode display current shift from S1 to S7
  20. Set Head-Up Display (Navigation map distance and turn signal, etc.) (Need hardware support)

42 PDC reversing radar is changed vertically and horizontally

 

 

 

  1. Vxdiag A3 for LAND ROVER &JAGUAR JLR SDD148

 

The newest JLR IDS V148 can perform online programming ecu, diagnosis test and programming key with Incode, Chinese localization, etc.

 

For the 2014 Range Rover Executive Edition and new Range Rover Sports, since the communication protocol was changed, only ALLSCANNER VXDIAG A3 is verified to be able to diagnose. JLR Mangoose cable can’t cover any longer, if JLR Mangoose cable is plugged into the vehicle, all the dashboard warning lights will be on and lead to the vehicle malfunction; VCM can’t cover neither, although it can cover the newer Jaguar and Land Rover.

 

 

 

  1. Vxdiag A3 for VW 

VW function:

Support obdii diagnostics, ecu programming, offline flash, key programming

Support the ODIS 3.1.0 software and UDS protocol.

Support Volkswagen, Audi, Skoda, Bentley, Lamborghini

 

ODIS language available:

English/Japanese/Portuguese/Romanian/Korean/Dutch/Polish/Turkish/Spanish/French/Italian/Croatian/Danish/German/Swedish/Finnish/Slovenian/Czech/Russian/Greek/Chinese

 

System Requirements: Dual-core processor, better above I5; over 4G of memory

Bus protocol: 

  1. J1850PWM / SCP
  2. ISO9141 / KWP2000
  3. ROSCO
  4. Medium Speed CAN
  5. CAN Bus (capable of ISO 15765, GMLAN, and ISO14229)

 

http://vxdiagtool.blogspot.com/2017/04/210-savedallscanne...

Switch-mode K+DCAN cable manual: a lot of reviews of DCAN USB interface

How to use/switch/connect to K-Line or Dcan pin 7&8? I have one of those K+DCAN USB cables and I am confused about how to switch the modes of it. Here are good tips i found, of the switch-mode k+dcan usb cable user manual. All i’ve collected just for education.

 

 

About the switch-mode K+DCAN interface

I assume the reasons being that on DCAN cars one pin is used for a ethernet connection and the other to the K data line – on K line cars, both pins are connected to K data lines and that creating a switch mode circuit would cost more than the interface is worth. The 2 most sensible options are both hardware-related:-

  1. Use an adapter (such as the one sold by One Stop electronics) which internally bridges pins 7 & 8 or,
  2. Mount a small switch on the OBD plug end of your adapter, which can bridge (for K line) or separate (for DCAN) the connection between pins 7 & 8.

 

Tip: the normal dcan cable vs. switch-mode k+dcan cable:
http://blog.obdexpress.co.uk/2016/04/27/2016-new-bmw-kdca...

 

 

 

– So you have to physically connect (K-Line) or disconnect (DCAN) pin 7&8?

– Yes, I think connection by soldering is a bad option as it limits the usefulness of the interface, I have an adapter but consider a switch to be a better option.

 

 

– Is there anything else to do for switching from K-Line to DCAN then disconnecting pin 7&8? Unfortunately I don’t have a DCAN model available.

– As soon as you connect the interface to the car and your computer, run DCAN.exe to configure the comms rate. I have only used my K+DCAN interface with DCAN cars.

 

 

– Is it necessary to do so every time I want to use DCAN or is the interface staying in DCAN mode once I ran DCAN.exe?

– You only need to run it when you are switching between modes. If you run it the first time you connect to a DCAN car, your computer will retain the settings.

 

 

– How do I switch back to K-Line? Just by connecting the two pins or is further action on the computer required?

– Earlier e39 had both the OBD port in the cabin and the round 20 pin connector under the hood.

 

The OBD port only allowed access to limited modules, I think only the DME in fact.

 

I always switch my K+D CAN adapter between K and D CAN protocols as I need to, depending on the car that I’m connecting to.

I use the DOS version of the DCAN utility. As mentioned if you only use the adapter on the e39, run the utility once and set the adapter to K CAN and leave it at that.

 

In fact thinking about it I use the same adapter for INPA, DIS and ISID.

 

With these K DCAN cables there are two subtle different versions, one with pin 8 enabled, one with it disabled. The one with it disabled is ideal for e90 newer than 03/07 & that era, these leads often come with a black adapter to re-enable the pin 8 (by just tying it to pin 9) so it will also be suitable for e46/e39/e63 etc. The ones with pin 8 active are just older versions of the cable. Worst cast scenario you just need to modify the cable & stuck a switch on it to toggle pin 8 on/off as needed.

 

Finally there are a lot of rubbish adapter cables out there. Finding a good one can be tricky.

 

 

– I have a 2003 E39 so there is no OBD1 anymore. How do you switch the modes physically? Do you use such a adapter to connect Pin 7&8?

– If you don‘t plan to use the cable on any cars that have DCAN(2007+) then you can pop open the case and solder a jumper between them. When you do this the DCAN functionality will no longer work though.

http://blog.obdexpress.co.uk/2017/04/13/switch-mode-kdcan...

page, enter the dealer to the account and password;

how-to-use-allscanner-cloud-diagnostic8how-to-use-allscanner-cloud-diagnostic9

 

4.Select the required models in the main interface Icon;

 

how-to-use-allscanner-cloud-diagnostic10

Select "Open Cloud diagnostics" and enter the cloud server(Note: to enter the cloud server must be connected to the device);

how-to-use-allscanner-cloud-diagnostic11

 

how-to-use-allscanner-cloud-diagnostic12how-to-use-allscanner-cloud-diagnostic13

 

how-to-use-allscanner-cloud-diagnostic14how-to-use-allscanner-cloud-diagnostic15

5.Open diagnostic software for vehicle diagnosis。

 

how-to-use-allscanner-cloud-diagnostic16 how-to-use-allscanner-cloud-diagnostic17

how-to-use-allscanner-cloud-diagnostic18

Related Information:http://www.vxdiag.net/

Allscanner Cloud diagnostics user manual PDF

 

http://blog.obdexpress.co.uk/2016/10/14/allscanner-cloud-...

12/04/2017

BMW E-Sys 3.28.1 Download Free & Install on Windows XP

Free download BMW E-Sys v3.28.1 Psdzdata Lite v3.61.1 on Mega: NO Pass

 

E-Sys 3.28.1 is the newest version, but not tested by professionals yet. You may try on your own risk when using ver. 3.28.1.

 

Download E-sys software v3.23.4: 100% Tested & Working Perfectly

Coding no issues for BMW F series with an ENET cable

 

How to install E-Sys 3.28.1 Psdzdata 3.61.1 on Windows XP

 

1     You must uninstall the existing E-SYS version before installing new E-SYS 3.28.1. After installing tested it with Launcher 2.7.0 and it works.

2     E-SYS Launcher Premium V2.7.0 Build 132(require NET Framework 4.5.2 or later)

3     E-SYS Launcher Premium V2.7.0info

Added cheat code selection

Change Code Default Values button name to DO NOT USE!!! (VERWENDEN SIE KEINE!!!)

 

 

How to install BMW E-sys 3.28

 

Run E-Sys_Setup_3_26_1_b42487.exe

Select language, click “Next” then “I accept the agreement” then “Next”.

Click “Browse” to choose where to install E-Sys. The default location is C:EC-AppsESGE-Sys.

download-bmw-e-sys-3-28-1-1

 

Set the data path for E-Sys, the default is C:Data.

download-bmw-e-sys-3-28-1-2

 

Click next until the installation begins.

download-bmw-e-sys-3-28-1-3

 

Click “Finish” to complete the basic installation procedure for E-sys.

Then you need to make it work.

You will see two folders, one is a “Patch” the other is “Token Generator”.

download-bmw-e-sys-3-28-1-4

 

The patch folder contains 2 files

download-bmw-e-sys-3-28-1-5

 

Copy the svc0x80.jar file to the lib directory (C: /EC-Apps/ESG/E-Sys/lib)

Place the E-Sys.bat (batch file) in the same directory as the .exe file. Replace the .bat file in that directory (C: /EC-Apps/ESG/E-Sys)

Use the Token Software, enter a username as you like and password.

 

 

How to install Psdzdata?

 

This is an important and final step of the installation process. The E-Sys installation doesn’t contain any data so you must copy the data into the right folder.

 

It’s recommended to use the Psdzdata “Lite” version because it has all the Firmware data removed so it saves a lot of space!

 

Extract Psdzdata using Winrar. Right click it and click “extract here”.

 

After that go to C:Data and erase the existing “Psdzdata” folder and copy this extracted new one in the same location.

 

 

What can you do with bmw esys enet for bmw coding?

Programming = Flashing a module, which means changing the actual software. Best done with a BMW ICOM emulator.

Coding = Reading and writing the memory which contains the configuration. Can be done with an ENET cable.

 

With bmw enet esys, you can hide modules or code a module

 

  1. Lock unlock sound confirmation ( to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in cic)
  2. Can operate the navigation menu including watching dvd when driving( for driving safety. Let the side driver operate the navigation menu )
  3. Display engine output and torque meter ( purely fun, look engine output )
  4. Cancel confirmation screen big screen boot delay
  5. Open the voice recognition function
  6. Three kind of bluetooth phone ringtones ( personality only )
  7. Increasing the cic memory address to 50
  8. The glass automatically rise to the top process is not terminated by the car door ( easy to get off to close the window waiting )
  9. The digital speed display ( fun only )
  10. Air-conditioned memory of the last off state ( without air conditioning season is more convenient )
  11. Indoor cycling memories of the last time the state when engine off
  12. A-pillar electric tailgate buttons and remote control a key to close the power tailgate. At any time terminate the reverse operation ( turn off 15 minutes or more reset )
  13. Increasing shift paddles
  14. The small screen to the large-screen display modify
  15. Pdc display vertical and horizontal
  16. Disable the seat belt status display – passenger seat
  17. Disable the seat belt status display – driver seat
  18. Disable seat belt reminder mistake ! The link is invalid. Device – passenger seat
  19. Disable seat belt reminder – driving position
  20. Disabled unfasten their seat belts voice prompts – passenger seat
  21. Disabled unfasten their seat belts voice prompts – driving position
  22. Intersection vehicle high beam automatic control ( no condition tested. Do not know if it is valid )
  23. Angel eyes open and cancel functions

24 turn off the engine start-stop function turned on by default

25, gps time synchronization

  1. Foot open the back cover
  2. Ds show s1-s7 selection
  3. Active sports gearbox program sport +
  4. Single microphone settings
  5. Engine off automatically unlock
  6. Internet applications
  7. Armrest usb playback video
  8. The maximum distance disable front camera view
  9. The maximum distance to disable the rear camera view
  10. Maximum speed disable front camera view
  11. The maximum speed to disable the rear camera view