topblog Ivoire blogs


How to Unlock LAUNCH EasyDiag Locked Adapters(With Video)

Hi friends, good news for owners of Locked adapters LAUNCH EasyDiag dug .


Note: its not my work. i coped from other

Here you go.


Thread: LAUNCH EasyDiag Unlocking Locked Adapters

around on the Internet, collected information and … it turned out!

I will describe the recovery steps for both Locked and Blown

LAUNCH EasyDiag adapters .

We need a

dump of a non-blocked adapter (with 52 firmware on board)The programer

runs the programmer in the J-link

and the program in which I did everything

Programs recommended by Adminom

program for firmware adapter


native application ST-Link

Before we begin, we will

use the utility from Segger to turn our St-Link V2 (clone) into the J-Link programmer

and install the program (downloaded from the link above) with which we will flash our Device * We disassemble the adapter (I took it apart on the board with a knife by cutting the place of the gluing of the case)


connect the programmer to the pictures


J-Link (ST-Link V2 Clone)


launch the J-Flash application

or ST-Link ( also works with St-Link V2, connect it to USB to get power.)


Unlock-LAUNCH-EasyDiag-Locked-Adapters-5 Unlock-LAUNCH-EasyDiag-Locked-Adapters-6

Create a new project select the controller STM32F207 IG

Unlock-LAUNCH-EasyDiag-Locked-Adapters-7 Unlock-LAUNCH-EasyDiag-Locked-Adapters-8

after all the procedures connect our adapter to the computer and connect it to the program in the Target tab, select Connect

and well on the video)) ))))

Good luck, the guys write, I will definitely prompt))))


05:56 Publié dans Blog | Tags : launch easydiag | Lien permanent | Commentaires (0)


Lonsdor K518ISE Registration Activation, Update Manual

How to register

How to activate

How to update


How to RegisterLonsdor K518ISE best key programmer?

After system updating, you need go to registration&activation.

For new user,

Click on Registration,

Input: user name(email), name(min 2 char), password(min 6 char), email verification code

Click on YES

Lonsdor K518ISEregistrationcompletes

(if interrupted after registration is done, you will go to the System update–Registered user to proceed).


Then go to Activation confirmation to continue.




After confirming activation, it will go thepassword Setup interface

set 6-digit numbers as your startup password

information verification by Lonsdor

(5-30 minutes, you can check the progress by clicking “Refresh” )

re-enter the password to verify

get the notification that verification successful

the whole process before using the device is complete.


The most important note:

  1. User name must be workable email address, so that you can receive the verification codefrom Lonsdor by email.
  2. Please pay attention to the difference between the registration password (min 6 char) and the startup password(6-digit), the former will generally only used when registration, so please commit the 6-digit startup password into memory, as this will be required every time when you start the device.
  3. The account will be bound to the corresponding device for life, other accounts can not log in your device and your account can not log in an registered or activated device either. 4. An account can be used to bind multiple new devices.



Connect to the network

the Lonsdor K518ISE car key programming software system will automatically update to the latest version.

There are 3 ways of system update:

 One key update: quickly update the new added or modified functions.

 APK update: this is used when the APK is updated.

 Force to update: this is used when the device is faulty or to retrieve data.




Volvo (S40, S60, S80, XC60, XC90, C30, C70, V40, V60, V70) key programming.

Toyota/Lexus: smart key all key lost – via OBD ( without dismantle)

BMW CAS3/CAS3+/CAS3++: direct OBD programming

BMW CAS4/CAS4+: dismantle & read data programming

2016 -New Maserati: smart key programming

2016 -New Ford: smart key programming

Hyundai / Kia 46/47/8A smart key: PIN code reading via OBD, all key lost included.

Renault ( Megane, Koleos, Scenic) without PIN code key programming

VAG group 4th & 5th immobilizer system

Ferrari (458, F12, F149): direct OBD programming

Peugeot /Citroen: two ways to read PIN code & programming, all keys lost included.



Lonsdor K518ISEImmobilizer Car List:



Audi, BMW, Benz, VW, Volvo, Citroen, Ferrari, Maserati, Fiat, Lamborghini, Jaguar, MG,Land Rover, Bentley, Lancia, Opel, Peugeot, Porsche, DS, Renault, Alfa Romeo, Smart,Borgward


Cadillac, Chevrolet, Dodge, GMC, Buick, Hummer, Ford, JEEP, Lincoln, Mercury


Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki,Toyota, Shigaoka Queen


Iveco, Trumpchi, BYD, Geely, Chery, Great Wall, Young Lotus (Basically all Chinese carmodels are included)


Lonsdor K518ISE Odometer Correction Car List:


VW, Porsche, Ford, Jaguar, Land Rover, Mazda, Audi, Renault, Hummer, Hyundai, Kia…

Note: more high-end cars will be updated very soon.


So, Lonsdor K518ISE can be the best key programming machine for all cars.


1st key programmer tool in the world is able to:

Read PIN code to Kia / Hyundai function for Type 46 & 47 & 8Akeys + Add Smart Key without PIN code

Match keys for all Volvo models via OBD

Mazda 3 Angkesaila smart key program (2017)

BYD smart key program without Pincode

Nissan key system (4 Digit Pin Code)

Nissan remote system

Nissan smart key system (New 20 Digit Rolling Pin Code) incl. Qashqai(after 2015), X-TRAIL(before 2013), QX60(after 2013), teana-vip(after 2013), Cima(after 2013), JX35(after 2013)

Toyota Smart Key all lost

Lamborghini Porsche BMW & LandRover Ferrari Models covered

a lot of Chinese vehicles Great Wall Haval Borgward MG Beiqi Foton covered


Introduce Universal Smart Key Emulator:


SKE-LT: Smart Key emulator – Toyota/Lexus smart key for all key lost via OBD

Black:  SKE-LT-DST40(94/D4) -Supports 94/D4 smart key.

Red: SKE-LT-8A(88/A8)-Support 88/A8 smart key.

Green: SKE-LT-DST80(98)-Supports 98 smart key.

Blue: SKE-LT-8A(A9)-Supports A9 smart key

Support by .


What exactly is the difference between FVDI and FDVI FLY?

FVDI or FDVI Flyobd:


Fvdi Fly is clone of AVDI (abrites) original tool.

Fvdi is clone of Fvdi Fly.

Fvdiclones are very limited but can be useful.


I used both of them and I never noticed any difference in functionality. I compared pcb and both are same, pcb version v4.1, same components


I have fvdi not from fly

And I have trouble with k-line – it not work.


I haven’t use fly but I have used fvdi obd and is working good for its price.

I heard that fly is clone of original and fvdi others is clone of fly ,that means is clone of clone .


I have an FVDI 2014 non fly and it works on K-Line and Can bus fine, not all features of each software work but it’s still a great piece of kit for the cash.


Don’t go with clone of fly fvdi. Fly FVDI is clone from AVDI. And other people clones Fly FVDI again, so clone from clone. I had FVDI 2015 Mercedes and a nice guy from ther forum cracked it to all brands. I bought genuine AVDI in cause of the online functions and sold my Fly FVDI 2015 cracked to a mate of me. To buy a FVDI from a shop always risky, always russian roulette. There are different hardware revisions.


Do not buy FVDI. This version Clone of Clone. not stable, not working good. You Need FLY FVDI, Working good, and stable!


Depending on the cars that you work on.

If it is mostly vag. vvdi or vvdi2.

For Bmw multitool, or also vvdi2.

Those are from xhorse and come with updates.

Some are happy with there fvdi, but i here many complains, when they need support or repair.


Tested fvdi from fly is work ok not full work but with a same bugs and other clone is work a same.

clone is clone fly or others a same craps, better is original Avdi but price …


Do not buy fvdi2.. whey don’t post which new functions it have.and what exact it can do.

they promised update fro free in real.because updates never comes out.

keep your money or better by an tool vvdi2 or vvdi bga mercedes tool.

Vvdi2 brings free updates.a tool works good.

wait until some people post what fvdi2 can really do.

If you looking only for VAG + BMW , then VVDI2 and VVDI prog is way to go. No need any other tool.90% of VAG and BMW can be done by OBD in VVDI2.

VVDI programmer don’t have OBD it’s only for bench programming.

Good for CAS4, FRM, EZS, EWS4 and many more.



Flyobd FVDI2 review:


I bought Flyobd FVDI generation 2 for VAG group vehicles. The only improvement they did was on vag group and that improvement did affect other software. The rest = 0 or bad.

Hmm… Maybe i can also say nothing new on on VAG. it’s v24 also. Only this time it can process info over the Internet and it function same as avdi v24 but does not support JC cluster and cannot read immo data for Audi from 2009 up , and also when trying to get cs for key coding after processing data over internet it shows 00 00 00 00 00 00 00

What i did on VAG vehicles with this Fvdi2 vag commander:

– Brand/Model of car : VW Caravelle– Year of car : 2001

– Feature in relation : transponder programming from dump

– Version of FVDI : Tagkey Tool 6.2

– Result : Error (4pcs. PCF7935 damaged)

Dump recognized good, pin readed correctly. Problem solved programming prepared PCF7935 to VW id44 via OBD.


– Brand/Model of car : Skoda Roomster– Year of car : 2006

– Feature in relation : pin read and key programming

– Version of FVDI : VAG 24.0

– Result : OK


– Brand/Model of car : golf 6 TDI 2012 
– Feature in relation : with CS (component protection ) , pin read and key programming

– Result : ok

– Brand/Model of car : VW Passat 3C 2.0tdi– Year of car : 2007

– Feature in relation : learning key

– Version of FVDI : OLD 18

– Result :ok


– Brand/Model of car : VAG– Year of car : 1998-2002

– Feature in relation : pin read from EDC15

– Version of FVDI : VAG 24.0

– Result : Error (can’t connected)


– Brand/Model of car : Audi A4– Year of car : 2003

– Feature in relation : pin read and key programming cluster RB4 crypto

– Version of FVDI : VAG 24.0

– Result : ErrorAfter read pin, eeprom content in RB4 faulty. Car don’t recognized original key. Solved by write content saved after first read.


– Brand/Model of car :Seat Leon 1PA

– Year of car : 2011

– Version of FVDI :fvdi 21

– Feature in relation :add new key

– Result :successfully

I would only suggest fly company to focus more on individual software like vag group and deliver like Xhorse VVDI2 than try to do many and only anger and frustrate customers