topblog Ivoire blogs


How to update and activate TM100 key programmer

TM100 is a universal auto key programmer that is able to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies. Following are the instructions on TM100 software activation, update and authorization online. 


1) Activating TM100 key programmer 

Open software CD 

Click Help Tab 

Click About 


After well communicating with TM100, the system will run an online activation. The system will display how many days remaining 


2) Updating TM100 Key pro 

Press Close button, you will be able to check the TM100 key pro hardware and software version information 


Click 【Update Software】button 

Downloading new software from server and it will take several minutes, please wait 

After that the system will display a windows prompting “File was downloaded successfully, please save your work”, click YES to update 

Update is processing 

Back to software main menu 

Click Help tab 

Click About to check the software that has been upgraded 


3) TM100 online authorization

Click Tool tab on the main menu 

Select 【Install New Modules】option 


TM100 is rebooting 

Licensed modules were installed successfully 

Ready to carry out function, read pin codes, key learn, etc 

05:54 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Toyota Rav4 2013 Key, how to read these ImmoBox case

I try on toyota rav4 year 2014 X100+ key programmer with option G chip reset and add H chip without problem after 20 min for reset immo. 


But, someone has already programmed the key to this Toyota Rav4 2013. It uses the chip H someone how to read these ImmoBox case?

ImmoBox case-1.jpg

ImmoBox case-2.jpg

I ordered new immo box yesterday because no answer and I should deliver the car.

I have avdi but dont have yhe function TN005 but I think even x-100 or ck-100 key pro can add it if its new box. There is no chip 56r on the location ic4 it came empty.


Finally, I solve my problem before getting the new immo i put the immo of a rav4 2010 G-type and connect the ring of the old model also by wiring to the immo cuz ring of 2013 cant read the g type key and i did reset 5 and 13 and them start the car.

08:06 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


VAS 5054A Audi VW V2.2.3 ODIS software installation

VAG VAS 5054a Bluetooth diagnostic scanner ODIS software has upgraded to current V2.2.3 (2.23) version that works on Volkswagen and imported VW& Audi models. Following is the detail V2.2.3 ODIS installation instruction on Windows 7 operating system. 


Operating system: Win XP/Win 7 


1)Create new folder 

Open My Computer>>D://

Create a new folder and name it “audi-vw-odis2.2.3”

Copy “VW audi ODIS2.2.3.part1” setup and paste it to the new created folder 

Eject DVD Driver (F:) you will get VW audi ODIS2.2.3.part2, copy it to the new created folder 

Eject DVD Driver(F:) again, you will get AUDI-VW ODIS2.2.3 license and part3 setup, copy both of them to the new created folder 

Check the filer that contains these four files 

vas 5054a ODIS 2.2.3 software-1.jpg

Select AUDI-VW ODIS 2.2.3 part1.past2 and part3, extract them to a folder and rename the folder “ODIS 2.23”

Cut AUDI-VW ODIS 2.2.3 part1.past2 and part3 


2) Install vas 5054 ODIS setup 

Open My Computer >>D://>> “audi-vw-odis2.2.3”>> “ODIS 2.23”>> VWAUDIODIS 2.2.3>>dav>>Odis>>Trade-Wholesale>>software>>installation 

Copy ODIS-Sv2.2.3-RC320L-Setup to C://

Open and run ODIS-Sv2.2.3-RC320L-Setup on C://

Select software language 

vas 5054a ODIS 2.2.3 software-2.jpg

Follow system prompt to save file to disk C

Search license at D:// audi-vw-odis2.2.3//AUDI-VW ODIS 2.2.3-License//license//license.dat

vas 5054a ODIS 2.2.3 software-3.jpg

Install Microsoft Visual C++2005 

Finish installing Setup Wizard


3) Activate & Configure ODIS V2.2.3 software 

Open “AUDI-VW ODIS2.2.3 license” on D://, copy and replace “OffboardDiagLauncher” on the desktop

Open “OffboardDiagLauncher” on the desktop, copy hardware ID and send the activation ID to the related salesman for activation

vas 5054a ODIS 2.2.3 software-4.jpg

Paste the activation registration name and activation key from salesman, click Register 

vas 5054a ODIS 2.2.3 software-5.jpg

Configure data input. Click “Select local directly” and locate Local Disk D://audi-vw-odis2.2.3//ODIS2.2.3//dav

Enter User Name: abc and keyword, press continue button 

vas 5054a ODIS 2.2.3 software-6.jpg

Update check results 

Software is loading, you will be able to check the new software information

Exit the software main program 


4) Connect vas 5054a 

Connect VAS 5054a Bluetooth scanner with vehicle and computer 

Open My computer>>Device Manager>>Softing Vehicle Interface>>VAS5054, to check the well communication is built 

Open “OffboardDiagLauncher” on the desktop 

Select “Start diagnosis” on the main function menu 

Turn vehicle ignition to ON

VAS 5054a ODIS software will automatically detect vehicle information, select vehicle version and engine type to continue 

vas 5054a ODIS 2.2.3 software-7.jpg

Check the control unit 


5) Bluetooth matching 

Install device driver software 

Find out Bluetooth connection on the right bottom corner of the system 

Click Add a Device 

vas 5054a ODIS 2.2.3 software-8.jpg

Select VAS5054 interface to add to the computer 

Select the device’s pairing code 

vas 5054a ODIS 2.2.3 software-9.jpg

Bluetooth connection is well built, the device is ready to use 


6) Configure hardware 

Open ODIS Service Diagnostic Interface Configuration on the desktop 

Press Add EDIC button

Select EDIC to install VAS5054 from the drop down list 

vas 5054a ODIS 2.2.3 software-10.jpg

Select COM port as COM4

vas 5054a ODIS 2.2.3 software-11.jpg

Software installation procedure is complete, start to diagnose vehicle with vas 5054a ODIS 2.2.3 software 

07:54 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)