topblog Ivoire blogs


How to add tokens for KESS V2 V2.13 FM4.036 ECU tuning kit

KESS V2 V2.13 firmware V4.036 Manager Tuning Kit master comes with no token limitation. KESS V2 V2.13/V2.12 software CD comes with token program, you can program tokens without removing chips or desoldering chips. 


One of our customer reported that he fails to add token according to the video when he has only 9 tokens left. Here is the step-by-step adding KESS V2 tokens instruction. 


How to program and add tokens for V2.13 or V2.12 KESS V2 ECU Programmer?



Please disable both local area connection and wireless network connection, otherwise the KESS V2 ECU tuning device will be damaged. 


Extract “Tool” Zip File;

Copy all the files under “Tool” Folder to the desktop;

Copy “K-Suite_tokens” zip File into Local Dick C and unzip the file;


Run “K10033818 K2-TR ECU TUNERS”;

Click “OK” to continue;


Browse the folder to C:KSuite tokensKSuite;

Click OK;


Click “Rest Token Count” button;


Click OK and then wait for loading;

Next close the window;

Delete previously unzipped “K-Suite_tokens” Folder in C:;

Re-extract “K-Suite_tokens” Zip File again;

Re-name “Token1.tok” on the desktop as “Token2.tok”;

Copy “Token2.tok” to the “Tokens” Folder;


Open “K10033818 K2-TR ECU TUNERS” again;

Select location as C:KSuite tokensKSuite again;

Click “Rest Token Count”;

Wait until the KESS V2 main menu window displays;


Adding tokens for KESS V2 V2.13 or KESS V2 V2.12 is completed.

05:53 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


VAG Bluetooth VAS 5054a ODI, VAS-PC, ELSA, ETKA

Bluetooth VAS 5054A ODIS, the new generation of Volkswagen Group diagnosis software has been released for VAG Audi, VW, Skoda, Seat, Lamborghini and Bentley specialists. ODIS with catalog parts software will meets the basic needs of VW mechanics. 



ODIS is the abbreviation of “Offlboard Diagnostic Information System”, it is the current most used diagnostic software for VAG groups. ODIS is always keeping up to date.  ODIS has released to 3 versions: ODIS V2.0, V2.02 (English and Chinese only) and V2.2.3. You are free to select VAS 5054A ODIS interface with or without OKI chip that supports PWM protocol and with or without UDS Protocol. With ODIS software and VAS 5054 interface, you are allowed to read/clear fault codes, display live data, reset warning light, reset service reminder, code a key, adapt a control unit etc functions. 

VAS 5054A ODIS-1.jpg


VAS-PC is the same software as ODIS, but it works on old VAG Audi, VW, Skoda, Seat, Lamborghini and Bently models. VAS-PC has been released to current software version V19 with multi language. The Bluetooth VAS 5054A VAS-PC interface comes with OKI chip that work all VW group models. 


Guided Fault Finding:

Part of VAS-PC and ODIS, this is a computer guided system. If a fault is stored, the program will launch a test plan for the technician to follow.

VAS 5054A ODIS-2.jpg

Guided Functions:

it is similar software of “Guided Fault Finding”. You will able to program keys, replace ECMs, coding modules etc.

VAS 5054A ODIS-3.jpg


ELSAWIN 4.0 is the software offered with full information on repair basically on new automobiles 1986-2011, electric schemes 1992-2009. In new versions of programs add the information not only on new, but also on old machines. For normal work of the program it is required to establish disk UTILS CD, INSTALL CD and last UPDATE Audi and VW.

ELSA software needs activation before, send your order number and code information (format link: 9CB7AC74) to We will send the activation code back.

VAS 5054A ODIS-4.jpg

ETKA 7.4

Audi, VW, Seat, Skoda ETKA Electronic Catalogue V7.4 software allows to enter VIN number of the machine{car} and carries out a filtration, using it, but thus number of a body is not considered, that is the program will define{determine} on VIN model and modeling year (using first 11symbols VIN), the rest will have to choose independently. It is meant, that with the program Audi, VW can work with thought up last figures VIN of number that can lead to mistakes {errors} in identification of units. No need activation.

VAS 5054A ODIS-5.jpg

08:02 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Benz Sprinter PSM online SCN coding with MB STAR diagnosis

If the PSM (Parametric special module) had not been installed in the Mercedes Benz Sprinter vehicle, SCN coding must be performed together with MB STAR diagnostic system.


What’s the PSM?

The Parametric Special Module (PSM) is an optional electronic module that is the only approved analog and digital gateway into the vehicle's electronic system. Since model year 2007 the Sprinter has a fully multiplexed electronic system, networked with several CAN bus systems and the PSM was developed specifically to provide upfitters, fleets and customers' access to individual types of CAN bus data.


Tool needed: 

Mercedes Benz MB STAR diagnostic system (MB SD Connect Compact C4 and Super MB STAR C3 multiplexer)

Online SCN coding software service for Star diagnosis 

A laptop that fits MB STAR (O/S according to the HDD type)


NOTE: Our SCN coding can only work on MB STAR COMPACT CONNECT 4 (Item number SP100-D) and Super MB STAR C3 (Item number SP45-B). This one only can be used on 2014.12 or newer star software. Cannot be used on software HDD before 2014.12 version. 



PSM SCN coding can be done both online and offline. Here is the online SCN coding guide. 


1. Configure MB STAR:

Come to “SDnet Control” menu>> Configuration >>Network: workshop cable network>> Place a checkmark next to “Automatically obtain IP address”


2. To check the active Internet connection, select Star Browser. The registration window for the after-sales platform should open. Enter the Service Name and password if request. 


3. Connect MB STAR diagnostic system with vehicle 


4. Start STAR DAS software program 


5. Select Benz model and make: Vans>>V-Class >>Sprinter>>Model designation>>Vehicle recognition. If the vehicle is not recognized, enter the required data manually (e.g. Germany, Rest of World)


6. Entry for retrofits and modifications - Select “Online” (“networked Star Diagnosis device”)


7. Change or enter the vehicle equipment codes: + ED5 (PSM installed), - ED8 (PSM preinstallation). 

NOTE: If the vehicle does not have a preinstallation (ED8), ED8 does not need to be changed to ED5.


8. Run a Quick test 

9. Come to the EIS (electronic ignition starter switch) control unit>> Control unit adaptation >>SCN coding >>Select the “Online (networked Star Diagnosis unit)" menu option


10. SCN coding will start automatically (visible on the progress bar on the screen). Please strictly follow the STAR diagnostic software instructions. Otherwise the control unit may be destroyed during the coding procedure. 


11. When the system display a comment “The coding variant has been changed”, the SCN coding is completed. The parameterization has been completely taken over in the EIS and is thus finished.

09:15 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)