topblog Ivoire blogs


How to Reprogram Mileage for Renault Avantime Using Tacho Pro 2008

Tacho Pro 2008 July PLUS Universal Dash Programmer is worldwide digital speedometers programming device served almost any vehicles, feature flexibility in use and Multi-language, being welcome in the after-market. 



912 Connector for Tacho Pro 2008 July device; 

Tacho Pro 2008 July PLUS Universal Dash Programmer

Tacho Pro 2008-1.jpg

Follow step-by-step guide below to do:

1: Remove and disassemble the speedometer;

2: Locate the processor;

Tacho Pro 2008-2.jpg

3: Solder the cable as the picture;

Tacho Pro 2008-3.jpg

4: Connect the plug 912 with the Tacho Pro Universal;

5: Select "speedometer" in the Tacho Universal;

6: The Tacho Universal shows you the old mileage data;

7: Enter the new mileage data;

8: Confirm the new mileage data with OK.



Speedometer and BSI have stood with the same miles when programmed.

05:45 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Newly Released V2015.03 Software for MB SD C4 with HDD

Obd2 Tools have recently released 2015.03 MB SD Connect Compact 4 WIFI diagnosis with HDD.

Exactly here comes with Big Promotion Sales, you indeed do not miss the chance.

Highlights to Get MB SD Connect C4:

1. Newest software version 2015.03; (Hardware version: OS: 2.3 CSD: 2.8)

2. Wireless and LAN cable connection supportable;

3. Multi-language: support over 20 languages;

4. Support Benz vehicle from 1995 to 2015;

5. Enjoy good after-sales service;


MB SD C4 has been proved to be the best diagnostic and programming tool for Mercedes Benz truck models.


MB SD C4 XENTRY Mercedes Benz Truck List:

Arocs (964), Antos (963), Actros (963), Actros2.3, Atego (967), Atego II, Axor II, Econic (956), Econic, Zetros, Actros, Atego Light, Atego Heavy, Axor, SK , MK, LK, ACCELO, LN, HSK, L 98, FPN M96, FPN M2000, HPN M96, Atron, HPN M2000, SKL, FSK and future more model series.


Except Benz truck, many other Benz vehicles are also supportable, such as Van, passenger car, Unimog and Bus, you can check the following link for detailed support lists:


MB SD Connect Compact 4 also supports reading and erasing DTCs, reading real-time data of sensor and actuator and coding for Mercedes Benz vehicles.


How to Set IP for Benz SD Connect Compact 4:

For wireless:

Set IP for Benz SD Connect Compact 4-1.png

For Wired:

Set IP for Benz SD Connect Compact 4-2.png

11:41 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

How to use Lexia-3 PP2000 XS Evolution to Program New Keys for Peugeot

Lexia-3 PP2000 XS Evolution with Diagbox V7.57 is an auto diagnostic tool that supports read identification and read fault codes (for normal use) etc. for most of Citroen and Peugeot vehicles from 1995 to 2013, while here I would like to show you how to program Peugeot new keys with Leixa-3. 


Attention: PIN Code is required during key programming procedure. Record your vehicle PIN code first.


Procedure to program Peugeot new keys:

1.Install and activate Lexia 3 xs Evolution PP2000 V25 diagnostic software.

2.Select vehicle model 307 and wait until the well communication built.

3.Check the entering vehicle information.

program Peugeot new keys-1.jpg

4.Select the application as "Peugeot Plant 2000" and confirm it.

program Peugeot new keys-2.jpg

5.Select test by ECU;

6.Choose "Built-in systems interface";

program Peugeot new keys-3.jpg

7.The system is reading the ECU in progress, follow and accept the windows prompts.

8.Select "Learning" option under carry out the tests menu display.

program Peugeot new keys-4.jpg

9.Select "Programming of keys";

program Peugeot new keys-5.jpg

10.The system will display key programming procedure when activation process is completed. Confirm to continue;

11.Confirm Unlocking the E.C.U program;

12.Manually enter the "Confidential code" (PIN Code).

program Peugeot new keys-6.jpg

13.The system is verifying the PIN code.If the code is correct, the built-in systems interface is ready for programming of keys;

14.Enter the key number to be learnt. The number of keys to be programmed cannot exceed 5.

program Peugeot new keys-7.jpg

15.Follow the screen prompt to switch off the ignition

16.Then switch ignition to ON within 15 seconds.

program Peugeot new keys-8.jpg

17.Key programmed, switch off the ignition and take out the key.

program Peugeot new keys-9.jpg

18.Switch ignition ON again and insert the next key in the ignition. Repeat the key programming procedure to program another key. When complete programming, the system will display keys that are programmed.

program Peugeot new keys-10.jpg

19.Follow the screen instructions.Check the handbrake is on. For an automatic gearbox, check the gear level is in position "P". For a manual gearbox, check that the gear level is in neutral;

20.Follow the re-synchronies the HF remote controls procedure to operate until the "End of key programming procedure" notice displays. Exit the program.

program Peugeot new keys-11.jpg


Another Lexia-3 xs Evolution (SP08-D), while the Lexia-3 above is SP08-C;


What are the differences for SP08-C Lexia-3 and SP08-D Lexia 3?

1. SP08-C Lexia 3 is made by original chip. It is more stable;

2. SP08-C Lexia 3 support Peugeot 307 models, but not good for Citroen C5, while SP08-D Lexia 3 does Not support Peugeot 307 and Citroen C5;

3. SP08-D Lexia 3 has one more cable than SP08-C Lexia 3.

08:00 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)