topblog Ivoire blogs

27/07/2017

OPCOM Op-com Firmware 1.60 1.59 1.45 1.39 Update User Manual

Here’s the OPCOM firmware update user manual. The op-com software version use one or other firmware version as fw 1.33, fw 1.39, fw 1.41, fw 1.43, fw 1.44 fw 1.45, fw 1.47 fw 1.59 fw 1.60 ( the last one ).

 

OPCOM firmware introduction:

OP-COM China clone ( op-com 100219a ) from 2009 use fw 1.39 – do not use other firmware

 

OP-COM software from 2011 use fw1.44

 

OP-COM software from 2012 used fw 1.45 and the software released at the end of that year used fw1.47

 

OP-COm software from 2014 used fw1.59 (fw 1.45 & 1.59 come with the same pcb)

 

VAUX-COm version, Romanian and German version of OP-COM used fw1.60

 

So the difference it is not in the firmware as 1.44, 1.45, the difference it is in the software version

 

NOTE:

– With other words if you have an op-com tool that it has firmware 1.39 and you’ll try to use it

– with for instance OP-COM 131223c English version the software will upgrade the firmware of your interface to the version that its need- to 1.59

– If then you try one of the version in Romanian/ German or vaux-com version 131223 the software will upgrade the firmware of the tool to the fw 1.60

 

So now in conclusion. You do not need to change the firmware of your tool with one or other. You only need to use the necessary firmware for the software version that you are using it.

OPCOM firmware update:

changing (upgrade or downgrade) firmware version in op-com chinese clone is at risk – you’ll damage the tool and it will not work anymore

 

The only way to change Opcom firmware is

 

to replace the MCU with a original Microchip PIC18F458

remove 2 component from PCB

Remake a connection on bord and cut another one

Then reprogram the new brand chip PIC18F458 and you can have a brand new clone that will be available to upgrade the firmware of the interface

NOTE:

– The firmware must be the one that it is required by the software version

– Do not use other one because will not 100% correct

– A normal clone not model cannot works with the Model software that works with as we named HQ clone

– This not depend on the ept or firmware and depend on the FTDI ID and PIC dump. All it is about a marriaged dump of PIC MCU with the FTDI ID – a uniq combination

– firmware 1.59 and 1.60 update is most populous:

 

Good luck

 

25/07/2017

Renault CAN CLIP programming : Yellow PCB vs Green PCB

There are five Chinese versions of Renault CAN CLIP 169 diagnostic tool, which best? The yellow PCB version or the green version?

 

Renault CAN CLIP china clone: what confirmed:

OBDII diagnostics: Confirmed

Reprogramming: Confirmed

!!!!!!!Renault CAN CLIP programming can be done only with YELLOW PCB version (SP19-E). GREEN versions failed!

 

 

 

Renault CAN CLIP diagnostic interface with item no. SP19-E (1)

 

Renault CAN CLIP diagnostic interface with item no. SP19-E (2)

 

Renault CAN CLIP diagnostic interface with item no. SP19-E (3)

 

Renault CAN CLIP diagnostic interface with item no. SP19-E (4)

 

Best-quality: Renault CAN CLIP diagnostic tool with item no. SP19-A

Best-quality: Renault CAN CLIP diagnostic tool with item no. SP19-A

 

 

Hottest: Renault CLIP diagnostic interface with item no. SP19-B

Hottest: Renault CLIP diagnostic interface with item no. SP19-B

 

Hottest: Renault CLIP diagnostic interface with item no. SP19-B

 

 

Cheapest: Renault CAN CLIP diagnostic interface with item no. SP19-D

 Renault CAN CLIP diagnostic interface with item no. SP19-D

 

 

 

High-quality: Renault CAN CLIP diagnostic interface with item no. SP19-C

High-quality: Renault CAN CLIP diagnostic interface with item no. SP19-C

 

High-quality: Renault CAN CLIP diagnostic interface with item no. SP19-C

 

 

Read the following tips if you decide to buy items from China.

Tip 1: Quality & Price

In China, you can get anything – at/for any price, problem is that you will have to accept the quality. “You get what you pay for” – And this is more or less true, there will be always someone somewhere “trying to” do it for less, but there are thresholds and once you step under them, you will have to suffer from the results. Quality of a product also depends on the material you purchase (You can’t simply make gold out of wood)

Tip 2: Reasons for low costs

The only reason why the obdii diagnostic cables are made in China is because 90% of the materials (micro-controllers and ICs) come from there. That is, it’s mainly about cost, most people would not be ready to pay 3-4 times the price just for the device being made in Europe or the US.

So, items are produced in high quantity and cost saving here

 

Source:http://blog.obdexpress.co.uk/2017/07/25/renault-can-clip-...

24/07/2017

How to use CGDI Prog BMW MSV80 Read MSV80 and CGDI Prog BMW Support List?

CGDI Prog MSV80 BMW Key Programmer is high technical tool which mainly doing Auto diagnose, programming and security maintenance,support BMW CAS1/CAS2/CAS3/CAS4/CAS4+ Key Matching and All key lost and support BMW Key Programmer with OBD Functions

 

 

 

CGDI Prog BMW MSV80 BMW CGDI Prog Car Key Programmer for BMW CAS1/CAS2/CAS3/CAS3+ Key Matching and All key lost

cgdi-prog-msv80-key-programmer-bmw-3

1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching,KEY all lost matching,CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.

2.BMW CAS4/CAS4+/Support key matching,support key all lost matching.

3.Support BMW key inspection,can check key what status in.

4.Support BMW engine computer DME replacement.

How to use How to use BMW CGDI Prog car key programmer 2017 New CGDI Prog Read BMW MSV80:

Method 1: can read directly ISN code in the car,pls be assure car voltage is 12V above,directly connect OBD to operate–time about 5 minus.

Methods 2: can directly split engine computer (DME) to operate–connectline as follows:

cgdi-prog-msv80-key-programmer-bmw-04 cgdi-prog-msv80-key-programmer-bmw-05

MSV80/D80/D85/wiring in the experimental bench

 

Where to buy  CGDI Prog BMW Key Programmer ?