topblog Ivoire blogs

02/06/2015

Program Ford key all key lost with OBDSTAR X100 PRO

OBDSTAR X100 PRO auto key programmer Ford Immo software has upgraded to V30.11 which optimized old style Mondeo immo. The new X-100 Pro is able to program Ford Focus, Mondo, Transit, New Fiesta, S-MAX etc key when all keys lost through immobilizer without pin code. 

 

Here is a Ford Focus Model key programming without pin code with X-100 PRO key programmer:

 

Select programming key according to vehicle makes, select “Makers” from the main screen 

Select vehicle region: America 

obdstar-x100-pro-Ford-key-program-1.jpg

Select vehicle makes: FORD

obdstar-x100-pro-Ford-key-program-2.jpg

The X-100 PRO key programmer will display the immo software version V30.11 

The system is loading scan and mcu bin, 

Select “China Ford” or “USA Ford” 

Select program key from “Immobilizer” system

obdstar-x100-pro-Ford-key-program-3.jpg

Select vehicle model: Focus 

obdstar-x100-pro-Ford-key-program-4.jpg

The Next program will brings to Select Focus key type: Type 1, Type 2 or Type 3 

Insert the key black into the key slot and turn ignition to ON

The X100 Pro will automatically detect the key Type, here Type 1

Select “All keys lost”

obdstar-x100-pro-Ford-key-program-5.jpg

Min 2 keys required, press Enter to continue 

The system is building communication with the vehicle. The s for 8 minutes 

Follow the X-100 Pro system prompt: 

Switch ignition OFF

Switch ignition on, ith key 1 for 3 sec, and then switch off and remove the key 

Switch ignition on with key 2 for 3 sec, and then switch off and remove the key

obdstar-x100-pro-Ford-key-program-6.jpg

NOTE: Other Ford models key programming when all keys lost with OBDSTAR X100 pro performs the similar procedure.

08:40 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

01/06/2015

How Autel MX-Sensor work with MaxiTPMS PAD

MaxiTPMS PAD Minimum Computer Requirements

Laptop or PC with 100 MB of free disc space

Windows XP, Vista or Version 7

Available USB Port

CD Drive

 

Connecting MaxiTPMS PAD

Connect the MaxiTPMS PAD to the PC using the supplied USB cable. The MaxiTPMS PAD program will always prompt you to connect the PAD before letting you start the process.

connect type a plug to the pc-01.jpg    connect type b plug to the pad-02.jpg

Indications of the Working Status

Power-on - Illuminates solid green light

Successful read or program - Illuminates green light with quick beeps

Failed read or program - Illuminates red light with a long beep

indicator-03.jpg

Sensor Communication

Wireless Communication – Place the sensor on the MaxiTPMS PAD in area marked by lines

place sensor on the pad-04.jpg

Launching MaxiTPMS PAD Software

Click on All Programs from Windows Start Menu, locate and click on to start the program.

If you haven't already, connect your MaxiTPMS PAD to your PC.

 

MaxiTPMS PAD Software Operation

Select the vehicle manufacturer from the Car Brand menu. Then select the model and year from the menu list that follow that click.

select car brand-05.jpg

You will now be ready to do one of these three operations:

1.Test Sensor - Click the Test Sensor button. Place the OE sensor on the

PAD. Click TEST to activate the sensor.

 

2.Copy Sensor - Click the Copy Sensor button. Place the OE sensor on the

PAD. Click TEST to activate and retrieve the sensor data, after this is successfully done, place the Autel MX-Sensor on the PAD. Click PROGRAM to write in the retrieved original sensor data to the MX-Sensor.

 

3.Create Sensor - Click Generate ID to create a sensor ID compatible with the

selected vehicle. Place the MX-Sensor on the PAD. Click PROGRAM to write in the generated sensor ID to the MX-sensor and activate it.

 

Installing the PC Software

Insert the CD comes with this kit into the CD drive. In most cases the software will launch automatically for installation and all you need to do is to follow the instructions on the PC screen. If the software does not launch automatically, follow these steps:

1. from the Start menu, click on My Computer.

2. Locate the Removable Storage drive displays as MaxiTPMS PAD.

3. Double click it to launch the auto install process.

The MaxiTPMS PAD program will launch automatically once successfully installed.

The start screen will prompt you to connect the PAD to the PC.

07:57 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

29/05/2015

VAS 5054A ODIS 2.2.3 and Postsetup 6.2.2 Free download

VAS 5054A ODIS/VAS-PC diagnostic software for VAG group (VW, Audi, Skoda, Seat) has released to the current V2.2.3. Here are the free download resources of ODIS V2.2.3 and ODIS-E Postsetup 6.2.2. 

 

Computer Requirements:

-O.S.: Windows XP; Windows Vista; Windows 7

-CPU: Pentium/Athlon 1 GHz or higher

-RAM: 512 MB of system memory

-Hard Drive: 60 GB of available space

-DVD-ROM

 

Vas 5054a ODIS (Offboard Diagnostic Information System) V2.2.3 crack 

http://www.mediafire.com/download/mcfkqzivz7zdv5r/Odis.2....

Vas 5054a ODIS-1.jpg

Vas 5054 ODIS-E Postsetup engineering software 6.2.2

http://www.mediafire.com/download/747r93zb0orm44z/ODIS-E_...

Vas 5054a ODIS-2.jpg

NOTE: We are not responsible for the free download crack and postsetup. If you need legal and save ODIS 2.2.3 software, please order here. 

(超链接http://www.obdexpress.co.uk/wholesale/odis-software-vas-5... )

Vas 5054a ODIS-3.jpg

Vas 5054a ODIS-4.jpg

Vas 5054a ODIS-5.jpg

Vas 5054a ODIS-6.jpg

VAS 5054 ODIS 2.2.3 Video Instruction 

http://www.dailymotion.com/video/x2lj08d

 

VAS 5054a 2.2.3 ODIS software installation blog

http://blog.obdexpress.co.uk/2015/05/15/vas-5054a-audi-vw...

 

1) Install odis 2.2.3 + postsetup 6.2.2 follow guide

2) Install drivers/VAS 5054A FIRMWARE UPGRADE / D-PDU API'S / D-PDU_API V1.20.23

3) VAS 5054a firmware patch- rewrite folder VAS5054a of the archive in C:ODISPDUAPIVEN-SOFTING1.20.023VeCom/VAS5054

4) Connect VAS5054a PC with USB locate drivers

5) Pair your computer with a Bluetooth VAS5054A with OKI chip find hwconfig

 

FAQ:

 

Q1: Can VAS PC and ODIS co-exist on the same Windows installation? 

A1: Yes, you can. In the ODIS will start the selection start ODIS or VAS-PC (one Window). 

 

Q2: What’s the difference between ODIS and VAS PC?

A2: ODIS is new software and VAS-PC is older software for vas 5054a interface. 

 

Q3: What is the difference of Odis and ODIS-E PostSetup?

A3: ODIS-E Postsetup is engineering software of ODIS. With it you can make much more as with the odis (service/dealer) version. It supports directly diagnose and update/flash ECU

 

Q4: I installed odis and it ask me for user name and password when I am doing diagnosis. ODIS have installed license? 

A4: If license is not installed your ODIS requires Admin and password. 

 

Q5: Hi, I install the ODIS 2.2.3 version, but the PostSetup configuration data input program says its not the right path /url for the poststetup and can´t find any data.

Vas 5054a ODIS-7.jpg

A5: Two solution provided: 

1. 

1)Change the the "postsetup" folder name to : "updates"

2)Then change folder name "Odis" to "ODIS_Engineering".

 

2. 

1).Create Odis_Engineering folder in the root of C://.

2).Extract postsetup.iso

3).Copy Trade-Retail folder to Odis_Engineering, the way should be с:/Odis_Engineering/Trade-Retail/software/postsetup/6.2.2/site.xml

4).Install Link Shell Exstension. 

5).Right click site.xml file in с:/Odis_Engineering/Trade-Retail/software/postsetup/6.2.2 folder, choose Pick Link Source from menu.

6).Go to C://, right click anywhere and choose Drop As../Hardlink clone

7).Try to install postsetup again, the way should be root of C.

05:54 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)