topblog Ivoire blogs


Golf 7 GTD 2014 rpm not stable, how to diagnose and tune


I've problem with Golf 7 GTD 2014

Golf 7 GTD 2014 rpm which have not stable I made a diag with original vcds I got only ASAM file not found EV_ECM20TDI01104

2 unknown error


The engine speed is a bit low, I need more power for this car.


Here is the flash I read it using mpps 16.1.02 

Vehicle Vin Number: WVWZZZAUZEW012758

VW Hardware Number: 04L906021EE

VW Software Number: 5225

VW System Type: R4 2,0L EDC 

VW Engine Code: CRVA

VW System Data: EV_ECM20TDI01104

BTW, I made a mistake I was thinking mpps can read read golf 7 edc17c64.  

my mpps is clone one so in the menu have EDC17xx uds that's why I think it can read it.


The professional advice I got:

Tuning is no good way to "repair" car.

Better to repair your car...and after that using a tuned contrary, you can damage more...please do a log of your car and see where is the problem before..also a good diagnose with good tools...


Problem solved:

It was very simple I made a good diagnosis as advice me.

With original v15.7 vcds

I have not found any of default

I just made an adaptation for the acceleration of idle speed


But the customer still wants to tune his car. I thought the kess v2 will do can read. 

And I get professional advice: kess v2 clones not work on golf 7 yet. 

CMD CAN Flasher and maybe original ktag 7.008 or magpro x17 will do. 

Considering CMD CAN Flasher is cheapest and working, I already got the CMD CAN Flasher when I'll read the ecu I'll post the dump here. According to its description, it is packed with only one single USB CAN cable and one CD, and golf 7 is in the vehicle supported list.


04:24 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


How to: Mercedes 722.9 7-G Tronic Change plate process

Here is the full document on changing Mercedes-Benz 722.9 7-G Tronic transmission plate with Mercedes dealer Star diagnostic system and special software. 



This is a ML W164 320 CDI with problem in plate on automatic gearbox (7G Tronic). It needs to change the plate. 



Install it then carry out Star Diagnosis SCN coding (Online Mb account)

Next Programming 

Later adaptations (you can save from your old computer and enter a new one, or just ride by car) 

It is good to also do at the same time the engine programming. 


If you have Vediamo, we can read the old Unit string and paste it into the new one.

If you have FVDI Abrites Commander, it will do the job as well.


Tools needed:

MB Star C3 diagnostic system (I am using Super MB Star MUX)

Vediamo 4.2 


NOTE: If you using MB SD Connect C4 system, you have to use Vediamo V05.00.05.


How to:

722.9 7-G Tronic Change plate process

For this procedure must have Star Diagnostic DAS developer and VEDIAMO software.

In Vediamo must install in this folder:


And com port fix to work on same prt like DAS.


Before work with DAS read and save SCN coding from old plate on your computer.


Then follow instruction below:

In Star diagnosis DAS –developer choose “Development data”


All process is automatic just read and do what DAS ask 


All process is automatic just read and do what DAS ask after that


You must do offline programming with new software from DVD


In some version of DAS you have option to delete old coding from plate! 

Job with DAS is done 

Now VEDIAMO procedure-


Setup option for MB Star C3 mux.+ install com port fix!!! Do following settings:










This is option to coding from selection but in manual coding you can read coding from your car and save to your pc- look picture below


And after procedure with DAS you can return coding to new module.



This is not cheap. The most cost-optimal way is to order the bundle package:


SD Connect multiplexer + Dell HDD+ Dell laptop + Free Vediamo V5.00.5

08:39 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


VAS 5054a ODIS 2.2.6+ PostSetup 6.70.1 Win 7 installation

VAG Volkswagen VAS 5054A ODIS diagnostic software for VW, Audi, Skoda, Seat, Bentley & Lamborghini is newly updated to 2.2.6 version with PostSetup 6.70.150. Here is the instruction on installing ODIS V2.2.6 on Windows 7 operating system. 


Software version: ODIS 2.2.6 + Postsetup 6.70.150+ free license 

Hardware: The new ODIS 2.26 software works with vas 5054 interface pass-thru SP33, SP33-B, SP33-C and SP33-BO (NO SP33-D !!!)


Operating system: Windows 7 (32-bit is better)





ODIS engineering 2.2.6 software installation on Win 7:

Main steps:

Step1: Install Driver 

Step 2: Install ODIS software 

Step 3: Activate/Validate license 

Step 4: Mount PostSetup-6.70.150

Step 5: Activate ODIS 2.2.6

Step 6: Connect vas 5054 via USB

Step 7: Bluetooth connection


Step1: Install Driver 

Open ODIS 2.2.6 software CD

Copy and paste Daemon-Tools-4.49.1356 zip file to desktop


Unzip the file 

Open Daemon-Tools-4.49.1356 folder, mount “InstalGadget” and run as administrator


Accept security warning, click “Install”

Adding virtual device


Click “Install”

System will detect driver and automatically install it


Step 2: Install ODIS software 

Open Daemon-Tools folder on desktop 

Open 01.Setup folder 

Open ODIS-S v2.2.6-RC369L-P6-Setup


Select language 

Install Offboard Diagnostic Information System Service setup, click “Continue”


Select target folder, press “Continue”

Select language again 

Press “Continue” until the system asks to select the license file 

Search license file to C:ODIS-2.2.6/02.Patch License/license.dat



Press Continue 

Click “Finish” when ODIS setup is well installed


Step 3: Activate/Validate license 

Open ODIS 2.2.6 CD

Open 02.Patch License folder 

Copy OffboardDiagLauncher and follow next step


Right click Offboard Diagnostic System Service software on desktop>>Properties>>Open File Location>> paste and replace OffboardDiagLauncher on the existing folder


Open Daemon tools folder 

If the system prompts “unable” to find activated DAEMON Tools Lite license, press “Continue”

Choose license type: Free license and click “Activate”


Click “Validate” to confirm license info.

License was validated successfully. 


Step 4: Mount PostSetup-6.70.150

Add image to “Image Catalog”

Browse image to C:/ODIS 2.2.6/03.Postsetup 6.70.150/ Postsetup 6.70.150


Mount PostSetup-6.70 iso


Step 5: Activate ODIS 2.2.6

Open ODIS v2.2.6 software on desktop 

Select Local directory to BD-ROM Drive (G:100)/Postsetup


Enter activation User name: abc and Keyword: abc (both low-case “abc”), press forward arrow to see Postsetup version



Press forward arrow to download 384 files file, the procedure takes about 30 minutes


Download completely will open ODIS automatically 

ODIS release notes information 

Click “Admin” on the right 

Select software language 

Exit the ODIS 


Step 6: Connect vas 5054 via USB

Open Computer 

Eject BD-ROM Drive (G:100)


Connect vas5054a interface with computer and vehicle 

System will automatically install vas 5054a device driver 

Open Computer>>Manager>>Device Manager>>Softing Vehicle Interface>> VAS5054 to make sure well communication is built


Run ODIS software on desktop 

Press “Start diagnosis”

Turn ignition switch 

Select vehicle information, model, year, engine etc


Select model and function your need diagnose 


Step 7: Bluetooth connection

If you need to diagnose wirelessly, follow these steps to add Bluetooth. 

Tick the Bluetooth icon on toolbar, click “Add a device”


Select “VAS5054” and add to device


Enter Bluetooth pair password: 082145725


Open Computer>>Manager>>Device Manager>> check Com port was set to COM4 >>Network adapters Bluetooth Device to check Bluetooth connection is well built


Open ODIS Service Diagnostic Interface Configurator on desktop 

Click “Add EDIC”

Select “VAS5054” to install


Select Local Bluetooth COM Port (COM4)


Run ODIS software 

Star diagnose vehicle wirelessly


PP077 ODIS 2.2.6+ vas5054a

08:48 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)