topblog Ivoire blogs

13/08/2015

How to update CG100 PROG III Airbag Reset Tool to V2.66?

CG100 PROG III Airbag Restore Device has newly updated to V2.66. Following are the V2.66 software download and update instruction provided. 

 

Latest software: V2.66

Language: English only

Operating system: WIN XP/WIN7/WIN8/32bit/64bit

Update: Via email/online 

 

How to update CG100 PROG III Airbag Restore Device (V2.5 or older) to V2.66?

 

First of all, download CG100 PROG III Airbag Reset Tool V2.66 software here:

https://mega.co.nz/#!m8FgSTZB!eqMItcITnmSJAduE3C_MkcQ67ub...

 

Then install new V2.66 software to run an upgrade. 

CG100-pro-iii-airbag-reset-v2.66-1.jpg

CG100-pro-iii-airbag-reset-v2.66-2.jpg

CG100-pro-iii-airbag-reset-v2.66-3.jpg

CG100-pro-iii-airbag-reset-v2.66-4.jpg

CG100 PROG III Airbag Tool Feature & Function:

1. Read Infineon Tricore MCU’s over CAN-bus

2. Read/Write EEPROM functions for secured and non-secured SAC-TC1766 SAC-TC1767, SAC-TC1796 SAC-TC1797 microcontrollers.

3. Comes with Mileage, DPF, ECU system time and ISN built-in calculators

4. Read and write EEPROM, support non-secure BMW DDME ECU microcontroller. 

5. Including All Function of Renesas SRS and Infineon XC236x FLASH

6. CG100 comes with built-in calculator that can calculate ISN, VIN and program CRC EEPROM

7. The software adopt to operate interface with wizard-style, data arbitrarily rewrite, MCU pin identification and detection, full support for CPU airbag computer repair.

 

Detailed cable connection instruction:

After you choose the model you want to do, it will show the detailed cable connection photo, to tell you where is the desolder point and how to connect. You can follow the photo to connect.

 

CG100 Pro iii software and connection cable display, check here:

http://www.obdexpress.co.uk/upload/pro/cg100-prog-iii-air...

05:44 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

12/08/2015

Original ACTIA Benz XENTRY Connect C5 Star diagnosis

100% Original second-hand Mercedes Benz XENTRY Connect C5 Star diagnostic system manufactured by French ACTIA tech is available in obd2express.co.uk. 

 

XENTRY C5 Top 6 Features:

1.100% Genuine scanner from ACTIA Company.

2. Xentry C5 support Mercedes newest hybrid W222 with DoIT protocol

3. Support vehicle makes: Mercedes-Benz, Smart, Maybach and Mitsubishi 

4.  Online update free for one year

5. Connection: Wireless connection via 1000M workshop switches & wired connection.

6. Full access to vehicles’ Engine / Transmission / air conditioning/SRS/ABS/ anti-theft system and OBD-II system. 

 

The Benz C5 Connect multiplexer comes with Panasonic Win 7 Xentry-Tab and 2015.5V DAS/XENTRY SSD. 

 

Panasonic Xentry-Tab

1. O/S: windows 7

2. Ultimate CPU:4G

3. Hard disk memory: 250G

4.13.3inch touch screen

wireless-mb-star-c5-xentry-connect-diagnostic-tool-ssd-1.jpg

wireless-mb-star-c5-xentry-connect-diagnostic-tool-ssd-des.jpg

wireless-mb-star-c5-xentry-connect-diagnostic-tool-ssd-des-2.jpg

wireless-mb-star-c5-xentry-connect-diagnostic-tool-ssd-des-3.jpg

wireless-mb-star-c5-xentry-connect-diagnostic-tool-ssd-des-4.jpg

Xentry-Connect (VCI+) technical parameters:

1. OS: Windows Embedded Standard 7(32bit)

2. Processor: ArrandaieCeleron P4500 oder P4505(38W TDP)

3. Memory: 4G hard disk with 256GB SSD

4. Display: 128*64 PX

5. Battery: 40 minutes (When CPU capacity to 60%)

6. Weight: 1.9KG

7. Network connection: WLAN : IEEE802.11 a/b/g/n2.4+5GHZ 

 

Package:

The package including C5 main unit, Panasonic tab and power supply, all necessary cables & connectors, and carrying case/box. 

 

The Benz C5 Connect Xentry kit now asks for €14,000.00.

09:43 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

How to install Ford VCM2 VCMII IDS V96 step by step

Ford VCMII IDS software has updated to V96 recently. Here is the step-by-step software installation guide provided. 

 

Software version: IDS (Integrated Diagnostic System) V96.01

Language:

VCM2-IDS-V96-1.jpg

Major steps:

1) Install V81 Calibration software:

2) Install Ford IDS V91.01 full

3) Install Ford-IDS-96.01-Full 

4) Test VCM 2 IDS V96 software 

5) Install DFStd frozen software 

 

Step-by-step instructions:

 

1) Install V81 Calibration software:

Insert V81 DVD

Open DVD RW Drive (E:) Ford IDS V81

VCM2-IDS-V96-2.jpg

Open VCMDVD

Click on “Calibrations”

Install Calibration C81, click “Next” 

Click “Next” 

Click “Install”

Please wait until the software is completely installed, usually it will take 30 minutes to 2 hours. 

Click “Finish” when C82 calibration software is well installed

VCM2-IDS-V96-3.jpg

Click “Exit” to quit VCM DVD

Eject DVD RW Drive (E:) Ford IDS V81

 

2) Install Ford IDS V91.01 full 

Insert V96 DVD

Open DVD RW Drive (E:)

VCM2-IDS-V96-4.jpg

Install IDS-V91.01 full first 

VCM2-IDS-V96-5.jpg

Select setup language, click Next 

Click Yes to proceed 

Click Next to install V91 wizard 

Accept license agreement 

Click Next 

Click Next

Click Install 

Please wait until the software is completely installed, usually it will take 30 minutes to 2 hours. 

This will create “IDS” shortcut on desktop 

Click Reboot when V91 IDS is installed 

VCM2-IDS-V96-6.jpg

Open IDS software on desktop 

Select Dealer Type: Non-dealer and country, press check mark

VCM2-IDS-V96-7.jpg

Computer Date Synchronization, Click on Continue 

Then you will get message reading a non-renewable Evaluation License…will expire in 3 days. 

Click Continue 

VCM2-IDS-V96-8.jpg

If you do not get the message, you may fail to install IDS, please quit operation. 

Check available modules, then close IDS

 

3) Install Ford-IDS-96.01-Full 

Open computer 

Install Ford-IDS-96.01-Full

VCM2-IDS-V96-9.jpg

Click Yes 

Click Next 

V96 IDS instillation is in progress, wait patiently 

Click Reboot when installation is complete

Open IDS software on desktop again 

Check available modules, then close it

 

4) Test VCM 2 IDS V96 software 

Connect VCM II diagnostic system with computer 

Click Start>>Control Panel>>Network and Internet>>Network and Sharing Center>>Change adapter settings 

Wait the communication complete 

Enable Local Area Connection

VCM2-IDS-V96-10.jpg

Open VCM2 IDS software 

Select specific module and let the IDS read your vehicle info. 

VCM2-IDS-V96-11.jpg

Diagnose and program other modules and functions, view dataloger etc

 

5) Install DFStd frozen software 

Open Computer 

Open DVD RW Drive (E:) Ford IDS

Open “DFSTD” folder 

After confirm IDS V96 software can diagnose and program, you need to use DFStd software to protect the installed IDS software partitioning. If the software is not protected, it will expire in 3 days. 

VCM2-IDS-V96-12.jpg

Click Next 

Accept license agreement 

Open DFStd-Key Notepad and paste the License key here 

VCM2-IDS-V96-13.jpg

Click Next 

Tick Disk C: 

Click Next 

Click Install 

Restart computer 

VCM2-IDS-V96-14.jpg

Check if Ford IDS V96.01 is installed correctly 

 

Related blog:

How to update VCM2 IDS to V96?

http://rtqobd2.ivoire-blog.com/archive/2015/08/08/how-to-...

08:20 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)