topblog Ivoire blogs

03/09/2015

BMW reset short circuit counter with EDIABAS Tool32

If your BMW NFRM is locked after short circuit, you need to reset short circuit counter in order for the headlight to work. This can be done with BMW Ediabas coding software. 

 

Tools needed:

BMW ISTA-D ISTA-P Rheingold Tool32 

BMW ICOM emulator 

 

Or you can download free Ediabas/INPA/WinKFP/NCS Expert Tool32 software on search engines and load it on cheap INPA K+DCAN cable

 

Instructions:

ⅠThis one uses the FRM module (e.g 2011 335xi with nav) and ToolSet32...

 

1) Make sure it’s on map 0

2) Load INPA software and make sure the cable is working

3) Close INPA (very important to do this)

4) launch TOOL32.EXE

5) click on "jobs" and start typing out: steuern_reset_kurzshlussabschaltung

6) click on the text box located under arguements and enter the various hex values (you will need to try both check marked and unchecked for the box that says DATA). Press F5 or double click on the job name to send each command one by one

a) arguement = 0x0 (received error result)

b) 0x1 (received error result)

c) 0x2 (received error result)

d) 0x3 (received error result)

e) 0x4 (received error result)

f) 0x5 (received error result)

g) 0x6 (received error result)

h) 0x7 (received error result)

i) 0x8 (received error result)

j) 0x9 (received error result)

k) 0xa (received error result)

l) 0xb (Got my first OKAY, and started to jump up and down with joy)

7) went back to the job for reading the counter and instead of showing 50... it was now 1

8) closed TOOL32.EXE and open INPA

9) cleared all errors in the FRM

10) start my car and enjoyed seeing my driver side AE alive again

EDIABAS-1.jpg

EDIABAS-2.jpg

EDIABAS-3.jpg

EDIABAS-4.jpg

EDIABAS-5.jpg

EDIABAS-6.jpg

ⅡLM (or LM2) module to unlock the short circuit flag with Tool32:

Procedure: (translated from German)

When LM1 provides the reading of short circuit status as follows (job name and PRG file in bold:

apiJob ("LM_AHL", "status_lampen_kurzschluss", "", "")

 

Rate: 0

OBJECT = lm_ahl

SAETZE = 1

JOBNAME = status_lampen_kurzschluss

VARIATION = LM_AHL

JOB STATUS =

UBATTCURRENT = -1

UBATTHISTORY = -1

IGNITIONCURRENT = -1

IGNITIONHISTORY = -1

Set: 1

JOB_STATUS = OKAY

STAT_FL_LINKS_SHORT_CIRCUIT = 0 00 00 ..

STAT_FL_RECHTS_SHORT_CIRCUIT = 0 00 00 ..

STAT_AL_LINKS_SHORT_CIRCUIT = 0 00 00 ..

STAT_AL_RECHTS_SHORT_CIRCUIT = 1 00 00 ..

STAT_BEGRL_LINKS_SHORT_CIRCUIT = 0 00 00 ..

STAT_BEGRL_RECHTS_SHORT_CIRCUIT = 0 00 00 ..

STAT_NSW_LINKS_SHORT_CIRCUIT = 0 00 00 ..

etc ...

 

"0" means Channel OK, "1" means short circuit. Channel numbers are easily counted from top to bottom, starting with "Channel 0" (!).

In Ex. Above, it is therefore of the channel 3.

 

Select the command to reset the lock now, which resets the counter.

apiJob ("LM_60", "reset_kurzschluss_sperre", "", "")

 

Rate: 0

OBJECT = lm_60

SAETZE = 1

JOBNAME = reset_kurzschluss_sperre

VARIATION = LM_60

JOB STATUS =

UBATTCURRENT = -1

UBATTHISTORY = -1

IGNITIONCURRENT = -1

IGNITIONHISTORY = -1

Set: 1

JOB_STATUS = ERROR_LAMP_NR

 

With no entry in the "argument" field is the "ERROR_LAMP_NR", ie channel number. Enter data and execute, the job status is "okay". Re-reading the counter should then show on the channel "0".

Each channel must be individually reset all channels at once is not possible.

 

When LM2 the command for resetting is "_reset_kurzschluss_sperre"

08:29 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

02/09/2015

How to activate MB Star Diagnosis Smart TAN Code software

Mercedes Benz Star diagnosis SD Connect C4 or Super MB Star C3 Dell/External HDD comes with a series of software DAS/Xentry/EPC/WIS etc and Smart TAN Code software. 

das-smart-calculator.jpg

The function of the Smart TAN code is to open special function in DAS program with all Smart cars 450/451/452/454.

 

Smart TAN Code software allows you to create:

Teach in keys

Softouch Codes

Steering Wheel Gearshift Codes

Cruise Control Codes

Equipment Codes

Brabus Performance Tuning Codes

Print and share the log file etc.

das-smart-calculator-carobd2-1.jpg

If you need to use the DAS program special functions for Smart cars, you need to order the 

Item No: SS27 DAS SMART Calculator with CD and USB key to activate the Smart TAN Code software. This generator will give you full Tan Code access to ALL new and old versions of DAS. The Smart code generator now is available in obdexpress.co.uk for €12 free shipping. 

 

How to use the DAS Smart TAN Code calculator?/How to activate the Smart TAN Code software?

1) Insert the CD into PC 

2) Insert the USB dongle to PC via USB port 

3) Open the software 

4) Entering ID will give you the TAN codes (format:2EBR-T175-D5TS)

5) Then enter the code to using special functions

super-mb-star-c3-smart-tan-code-1.jpg

super-mb-star-c3-smart-tan-code-2.jpg

super-mb-star-c3-smart-tan-code-3.jpg

05:58 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

01/09/2015

Solution for Hyundai ix35 indicator lights on driver’s side all time is on

This post starts with the problem that Hyundai ix35 indicator lights on driver’s side all time is on, then the advised solution is followed in the following parts. 

 

Car model and year: 

hyundai ix35 tucson 2011 year,2.0i gasoline,manual transmission

 

Problem: 

I have problem with indicator lights on drivers side(rear and on drivers mirror),all time is on .When lock vehicle,that two indicators stay enabled and can't turn off.

 

Hyundai diagnostic tool I use:

GDS VCI Diagnostic Tool for Kia & Hyundai V15 from

http://www.obdexpress.co.uk/wholesale/gds-vci-diagnostic-... 

 

Got wiring diagram to follow:

wiring-diagram.jpg

wiring-diagram-02.jpg

By following this picture, I tried to do:

To this box on connector i/p F,on pin number 4,comes white wire with constant 12 volt supply.When i cut this wire,left rear and left mirror flasher turn off.Can you please check from where comes that wire,from what module?On photos that you posted i see that from bcm comes only can bus wires,not voltage wires.BCM is too dificult to remove and i think some other module choose problem with rear flashers.

 

I see i/p F here: connector marked F on junction fuse box.To this connector on pin 4 comes white wire with constantly 12v supply and choose to RL flasher and mirror flasher stay allways on and front left not working.When i cut this wire,left front flasher start working normaly but rear left and left mirror stop working.Problem is in that wire but i dont know from where comes.Need to know from what module that wire comes.

 

Meanwhile, I tried to download GDS and it is too big. 

 

Then I got picture on connections/ location:

parts-03.jpg

parts-04.jpg

Advised solution:

I got advised solution "am sure 99% problem with junction box,

Here this problem appear when someone try to install something to the car like xenon, camera ...etc. "

 

This is photo pin 8 in grey connector

parts-05.jpg

05:20 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)