topblog Ivoire blogs

23/09/2015

How to install MPPS V13.02 software driver on Win 7?

MPPS V13.02 EDC16 ECU Tuning Remap Chip tuning CAN Flasher is default to be installed on Windows XP operating system, but some have achieved it on Win 7. Here is the instruction on installing Mpps v13.02 on Win 7. 

 

The instruction fits MPPS V13.02 K+CAN USB cable (SE74, SE74-B)/SMPS MPPS interface with a Driver disk

MPPS-cable-and-disk-1.jpg

MPPS-cable-and-disk-2.jpg

If the driver CD is broken, you can free download MPPS V13.02 driver software here:

http://down.obdexpress.co.uk/mpps-v13.part1.zip

http://down.obdexpress.co.uk/mpps-v13.part2.zip

 

Instruction:

Open driver CD or software file 

Install MPPS13.02.exe setup 

Select software Language (multi-language avaliable), click OK

MPPS-V13.03-install-on-win7-3.jpg

Install hardware wizard, click Next 

MPPS-V13.03-install-on-win7-4.jpg

Select destination C:, click Next 

Click Next 

Click Installation to install driver 

MPPS-V13.03-install-on-win7-5.jpg

Click Finish when installation is completed 

 

If MPPS software prompt “MPPS Firmware Upgrade” message, it is normal when MPPS cable is not plugged in or the driver is incorrectly installed 

Click Exit

MPPS-V13.03-install-on-win7-6.jpg

Now plug the MPPS USB cable with computer 

If win7 fails to automatically install driver, install the driver manually 

MPPS-V13.03-install-on-win7-7.jpg

Go to Start>> Computer>>right click Properties>> Device Manager>> Amt Flash>>Update Driver Software…

MPPS-V13.03-install-on-win7-8.jpg

Select Browse my computer for driver software 

Browse file to C:MPPSDevice Driver 

MPPS-V13.03-install-on-win7-9.jpg

Click Next 

If the system prompts “Would you like to install this device software”, click “Install”

MPPS-V13.03-install-on-win7-10.jpg

Installing driver software is completed 

In windows 7 you will need to run MPPS as administrator, otherwise, software will not open. 

MPPS-V13.03-install-on-win7-11.jpg

Right click MPPS v13.02 software on desktop, click Properties 

Select Compatibility 

Tick Run the program as an administrator, click OK

MPPS-V13.03-install-on-win7-12.jpg

Open MPPS V13.02 software on desktop 

If you try to run MPPS not as administrator or without the cable plugged in you will see following screen 

MPPS-V13.03-install-on-win7-13.jpg

Installation is completed. Start tune ECU with the MPPS software.

http://www.obdexpress.co.uk/service/smps-mpps-v50-edc16-c...

22/09/2015

How to install Multidiag Pro DS150E 2014.3V software

Bluetooth MultiDiag Pro+ DS150E diagnostic interface for cars, truck and OBD2 software has newly updated to 2014.3V. Here is the step-by-step software installation guide. 

 

Software version: DS150E 2014.3V 

Operating system: Win XP (Most), Win 7 and Win 8

Hardware: Bluetooth Multidiag Pro with SN:100251 (Item No SP207, SP207-B, SP207-C, SP207-D, SP207-E)

Language: English, Czech, Dansk, Dutch, Finnish, German, French, Greek, Hungarian, Italian, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian, Spanish, Suomi, Swedish, Turkish

 

Pre-installation caution:

Disable network connection and disable anti-virus software program!!! Very important!!!

 

Main Steps:

1.Install WINRAR 

2.Install DSCars-R32013.exe

3.Install Microsoft.Net Framework 3.5

4.Activate DS150E 2014.03 software 

5.Configure DS150E 2014.3 software 

6.Update Multi diag pro firmware 

Diagnose with DS150E

Multi-diag-pro-ds150e-2014.03-1.jpg

1. Install WINRAR 

Open my computer 

Open DS150E 2014.3 software CD

Open DS150E 2014.03 folder 

Open WINRAR folder

Open wrar362

Click Install 

Multi-diag-pro-ds150e-2014.03-2.jpg

Select all

Click OK

Click Done 

WINRAR installation is completed 

 

2. Install DSCars-R32013.exe.

Copy DS150E-V2014.3 patch and MULTI HW ID file

Multi-diag-pro-ds150e-2014.03-3.jpg

Open DSCars-R32013.exe.

Multi-diag-pro-ds150e-2014.03-4.jpg

Select language 

Please select SN:100251 DS150E NEW VCI

Multi-diag-pro-ds150e-2014.03-5.jpg

Select country 

Click Next 

Tick I have read the system requirements, click Next 

Install DS150E NEW VCI Setup, click Next

Multi-diag-pro-ds150e-2014.03-6.jpg

Click Install 

Click Next 

Click OK to accept system notice 

 

3. Install Microsoft.Net Framework 3.5

Select I have read and ACCEPT the terms of the License Agreement

Tick Send information about my setup experiences to Microsoft Corporation 

Click Install 

Multi-diag-pro-ds150e-2014.03-7.jpg

Microsoft.Net Framework 3.5 SP1 has been installed successfully, click Exit 

Please wait DS150E new VCI setup is being installed 

Installation complete, click Next 

Click Finish when DS150E new vci setup is completed 

Multi-diag-pro-ds150e-2014.03-8.jpg

Extract DS150E 2014.03 Patch on desktop 

Delete the existing data folder. Copy all files in patch folder and replace to the install patch prompt as the picture below

Multi-diag-pro-ds150e-2014.03-9.jpg

Right click DS150E (New VCI) on desktop>> Properties>>Find Target>>data to delete “data” folder 

Multi-diag-pro-ds150e-2014.03-10.jpg

Copy all files in DS150E patch folder to DS150E (New VCI) folder 

Multi-diag-pro-ds150e-2014.03-11.jpg

Delete the unzipped patch folder on desktop 

 

4. Activate DS150E 2014.03 software 

Run “DS150E (new vci)” on desktop and activate it 

Software requires activation, press the forward arrow to proceed 

Multi-diag-pro-ds150e-2014.03-12.jpg

Software will ask you to enter Serial Number and Hardware Key

Multi-diag-pro-ds150e-2014.03-13.jpg

Open MULTI HW ID on desktop 

Enter SN and select brand, press Key button, it will display HWID

Multi-diag-pro-ds150e-2014.03-14.jpg

Paste the HWID to Hardware Key

Press forward arrow 

1) Click Start

2) Click Yes to save “FileActvation” on desktop

Multi-diag-pro-ds150e-2014.03-15.jpg

Delete MULTI HW ID on desktop 

3) Send FileActviation you just saved on desktop to your seller 

4) Wait your seller to send back the FileActviation file activated 

5) Copy the FileActviation file activated replace to the file on desktop 

6) Click Start on software activation program 

7) Click NO

8) Select the FileActivation file activated on desktop and open it 

9) Wait for installation complete, enjoy 

 

5. Configure DS150E 2014.3V software 

Run DS150E (New VCI) software on desktop 

Click Setting tab>>Language 

Select the software language you need

Multi-diag-pro-ds150e-2014.03-16.jpg

Click Yes

Select vehicle information, Brand, Model, Year, System type, engine etc 

Multi-diag-pro-ds150e-2014.03-17.jpg

6. Update Multi Pro firmware

Connect Multi Prog pro interface with computer and vehicle 

Open My computer>>Manager>.Device Manager>>Ports>>VCI (Diagnostic Unit) Serial Port (COM4)

Multi-diag-pro-ds150e-2014.03-18.jpg

Open DS150E software 

Click Settings tab>>Hardware setup 

Click Test to run a software test 

When the system prompts to update firmware version, click OK

Multi-diag-pro-ds150e-2014.03-19.jpg

Self Test OK

Select Firmware version 1423, click Update button 

Multi-diag-pro-ds150e-2014.03-20.jpg

Firmware Update finished. 

Click OK

 

7. Diagnose with DS150E 2014.03V software 

Back to software main menu 

Click Diagnostic icon 

Follow software prompt to:

1)Turn ignition on or start the engine 

2)Start measuring

3)Choose the test or tests you want to perform 

4)Exit measuring 

5)Turn ignition off

Multi-diag-pro-ds150e-2014.03-21.jpg

Start performing diagnostic functions

Multi-diag-pro-ds150e-2014.03-22.jpg

http://www.obdexpress.co.uk/service/multidiag-pro-bluetoo...

08:01 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

21/09/2015

Free download YanHua Porsche PIWIS Tester 2 V15.900

Good news!!! YANHUA Porsche PIWIS tester II diagnostic scan tool software has newly updated to V15.900 (09/2015). The new version can works with latest Macan. Obd2express.co.uk here provides the free PIWIS V15.9 software download. 

 

Free download Porsche PIWIS V15.900

http://cnc.qclt.com/porsche/piwis2-update-DVD/v15.900/

 

NOTE: The update software fits SP161-BS YanHua brand Porsche tester only. 

 

Software version: V15.9/V15.900 

Language:  English, German, French, Italian, Spanish, Japanese, Chinese, Russian, Portuguese and Dutch.

Update: by HDD

Operating system: Windows XP only (Panasonic CF-30 laptop CPU: 9300 4GB RAM)

 

V15.900 PIWIS software display:

V15.900 PIWIS software display-1.jpg

V15.900 PIWIS software display-2.jpg

V15.900 PIWIS software display-3.jpg

V15.900 PIWIS software display-4.jpg

V15.900 PIWIS software display-5.jpg

V15.900 PIWIS software display-6.jpg

V15.9 version PIWIS with new piwis Wiring diagram system:

V15.900 PIWIS software display-7.jpg

V15.900 PIWIS software display-8.jpg

 

How to update Porsche PIWIS from V15.600 to V15.900?

Download the free software and burn to DVD to run an update. Follow these steps:

1) Please insert the upgrade DVD into DVD rom, then choose [Tools- DVD Upgrade] the software will install automatically.

2) Click [Yes] to confirm released DVD installation prompt;

3) Click [OK] to confirm the setup.

4) When you seen these screens, you need wait with patient, it might cost around 4-7 hours to finish the whole upgrade process.

5) Open the software after computer reboot, check the Porsche Tester2 V15.900 software information.

08:32 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)