topblog Ivoire blogs


VVDI Prog Programmer 3.92 Free Download

This is all about the new VVDI Prog Programmer 3.92, including the latest software and hardware introduction. Hope this helps someone in need.


Free download vvdi prog 3.92: 

contents included:



vehicle ECU wiring diagram


How to install VVDI PROG software:


compatible device for files above:

Xhorse vvdi prog programmer


What’s new in VVDI PROG v3.9.2 (2015-10-30):

* the firmware update is unnecessary

+ add CAS2 version 2 wiring diagram

+ add PCF79XX wiring diagram

+ In <2- microcontroller> Motorola, add



   MC9S12XES384 with mask model:

   (2M25J, 3M25J, 0M12S, 1M12S),

   MC9S12XEP768 with mask model:

   (4M48H, 5M48H, 0N35H, 1N35H)

+ add MC68HC05X32, MC68HC705X32 series

   mask Model:

   (0D62J, 1H52A, 0D69J, 1D69J, 2D69J)

   (Need to use MC68HC05X adapter)

* Fixed ID reading issue on MC9S12XE series 

* Fixed EEE writing issues on MC9S12XE series

* Modify Audi J518 wiring diagram


3.92 vvdi prog software display:

3.92 vvdi prog software-1.jpg

3.92 vvdi prog software-2.jpg


Vvdi prog hardware test:

Vvdi prog hardware test-4.jpg

Vvdi prog hardware test-5.jpg

Vvdi prog hardware test-6.jpg

Top 4 reasons to choose VVDI PROG:

1) 100% Genuine tool made by XHorse company. High quality.


2) Frequently software update

You can directly download the latest update tool from official website to update your tool.


3) Detailed cable connection photo help you use this tool easily.


4) Buy VVDI-Prog programmer, GET FREE BMW ISN read function and NEC, MPC, Infineon etc chip continuously update service 


Read more:



10:05 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

How to fix Star DAS/Xentry "No access authorization code" error?

A small part of MB Star DAS/Xentry users got "No access authorization code" error when operating Xentry/DAS activation, shown as follows. 


There are 2 possible reasons and solution:

The first possible reason: You haven't ctivate Xentry and DAS. You are required to send your supplier HW-ID,Lan ID and APP ID for Xentry activation and HW-ID for DAS activation, please follow the user guide to active Xentry and DAS:


The second possible: You activated successfully, but when you start the computer, you get the same error. Then please do by following steps.

1). Go to "C/Documents and Setting/All Users/Application Data/LicDir"


2). Copy "Lic_Key_2.dat" and paste it.

3). Setting the folder as "Show hidden files and folders".

4). Rename "copy file Lic_Key_2.dat" as "Lic_Key_2.x4711".


5). Again input the password of Xentry, and save it.

6). Test the Xentry software

07:57 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


(Solved) Mercedes W203 EDC16C2 ECU problem not crank and not read on BDM

This post begins with Mercedes W203 EDC16C2 ECU problem that MPC556LF8MZP40 wont crank and ecu not possible to read on BDM, and finally solve the problem. To know how to solve this problem, go on reading.


Car model and year:

MERCEDES W203 EDC16C2 ecu 0281012451 A6461504091.




Ecu has problem with MPC556LF8MZP40.

It wont cranck untill you heat mpc little bit. Around 20C.

Also ecu is not possible to read on BDM. It cant recognize it.


What tool used to test?

Tested with FGTech Galletto and BDM100 ECU programmer


Detailed problem description:

So I found DUMPS on forum readed with DIMSPORT.

Because i am not sure that dumps are ok, i have to program them in to another same cu from W211 so i can test it on mercedes w203.

After programming W211 ecu with BDM100 in dimsport software i use external eeprom from W203 ecu and program it in w211 ecu.

I test it on car and everything went fine. Car start and no fault (checked with DAS).

After testing i use GALETTO and read w211 ecu and save files. So i have files that work.

Then i start to searcH for used MPC556LF8MZP40, and i found it in FORD FOCUS EDC16 working ECU.

I resolder it from ford ecu and re-ball it and solder it on mercedes w203 ecu. I connect it with GALETTO and finally i can connect it. 

When i look better i saw that eeprom PROGRAMM and READ options are disable.

So i was thinking ok that was wrong dump inside MPC and i start with programming MPC. After programming MPC i restart the ecu and same problem.

OK i have to program also external FLASH and MPC. Maybe that could be the problem.

After programming MPC and flash i have still the same situation. Not possible to read and program external EEPROM.


Finally, Solved!!!

Problem was bad mpc. When i heat it littlebit i get access to the eeprom. i replace new mpc and now cor run smootlhy.

02:52 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)