topblog Ivoire blogs


Solution of KESS V2 ksuite warning: the tool is not updated

Customer Share on Kess v2 ksuite warning: the tool is not updated. Connect the PC to the Internet and run again the software.

kess-v2-warning.jpg technician give the useful tips of the error of Kess v2 ksuite warning “the tool is not updated”.

Try different USB cable.
Some users with the same problem fixed the problem by a new USB cable.
Reflash with J-Link.

1. Do not update this tool online, or It will get damaged
2. Do remember disconnect internet when you use it

If you connect to internet with this clone kess v2, or make online update. The interface is destroy/broken.

1.–Buy a new NPX chip with 60 tokens inside. Desolder the old NPX and change it with new. 


2.–or you have to weld a connector on backside of interface ,and plug the J-link programmer.
You can reset the Kess v2 to virgin.


07:41 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Multi-Di@g Truck Heavy Duty Diagnostic software installation tips

Here is the tips you need to pay attention when you install this software and information about this multi-diag truck diagnostic tool.

Multi-Language: English, French, Spanish, Russian, Italian, Portuguese, German, Dutch, Swedish, Czech, Croatian, Hungarian, Rumanian, Serbian, Danish, Finnish, Polish.

Complete activation data is like this
PN - MA006964
FW - 11.3.1
SN - P001670707
Generated password: DD600F5A1233196EFA303929CB1CE929A
Send these information and your order number to After we get these information, We will resend another activation data you need to you. Then you can use the data to activate your multi-diag truck.


What should you pay attention to when you install this Multi-Di@g Truck software?
1) Make sure your computer system time must be the same date as you install the software
please dend the file 'key' to us. Before install the software, check the computer system time, it must be the time of the day, it can’t be changed.

2) Before we send you the activation key, please do not disconnect computer power supply and the device,
and do not let the computer sleep. You cannot close computer till successfully active the software.

3) We will give you the activation key

What is the difference for WAS Multi-Di@g Truck and ialtest Link Code Reader:
1) For european vehicles, they have no difference.
2) For USA vehicles, ialtest Link Code Reader software is newer than WAS Multi-Di@g Truck, so ialtest Link Code Reader can work more newer USA vehicles.
3) WAS Multi-Di@g Truck support more languages than ialtest Link Code Reader

Multi-Di@g Truck Heavy Duty Diagnostic Tool software shown:



09:26 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Ford VCM error: cable between ids and vcm not detected (SOLVED)

I bought a few days before the diagnosis ford vcm software clone with 75 .. I have a problem in the communication I have installed the software, connected to the vehicle comes with a screen error (cable between ids and vcm not detected) what can be??

have change the IP address to in Control panel/network. Everyone make this mistake. Ford VCM works on LAN.The small black box in the middle of the cable is USB to LAN convertor.You will see in the network adapters that there is Realtek 8185 (or someone other network adapter i forget the name) change the automatic IP to static IP with

And beware Ford VCM can work only on main USB on your Laptop.Try to attach the VCM on every USB and you will see that IP address is change all time. only on one USB, VCM can work.

BEST-quality Ford VCM II clone with wireless card, to better diagnose, do programming, and avoid less troubles:

07:10 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)