topblog Ivoire blogs


2016 VAUX-COM & Opcom Firmware 1.64: Confirmed!

Hello bro, i found important information when did search on MH forum. Someone made update Opcom 2016 pro version !!!! share it again here. Hope it helps


Look here..












Cars up to 2016. Corsa E, Mokka, Karl, Adam, etc.

Languages: English and German!!!


Firmware 1.64 and it work just with real pic18f458 OP COM

do not tested with fake pic18f458 (pcb V6.0)

opcom-firmware-16 opcom-firmware-164-real-pc(1)

Good version, working perfect on pcb with Mikrochip processor.

Real year 2016 full version

Tested on cars


Note: all above is shared via

You can go there for more details


Note: In reality, not only Opcom 1.64 but firmware 1.59/1.65/1.70/1.95 comes with the real chip.

Look here: OP-COM with real pic18f458:

Opcom Firmware V1.95

Opcom Firmware V1.65

03:49 Publié dans Blog, car diagnosis tool | Tags : opcom | Lien permanent | Commentaires (0)


(Solved) Nissan Consult 3 Plus reprogramming option was disabled (Gray)

Topic: Nissan Consult 3 Plus reprogramming option was disabled (Gray)


Trouble: I tried to reprogram the ABS module for a 2009 Nissan Murano but reprogramming option was disabled (Gray). any body knows how to activate it? I’m using Nissan Consult 3 plus from the site i confirm this tool can be used for reprogramming, but not know how to


Reply: you need to edit the file DiagnoticTool.ini to enable reprogramming and also IMMO. Or if you have money to waste buy the reprogramming card and the NATS card. Add the following line to the DiagnosticTool.ini file






also make sure system management access_mode is set to 1. That should give you full access. That's not to say that it will work if you do not have the correct calibration file in the reprogramming folder on the C drive.


good luck


Feedback: Thanks it worked


What can Lonsdor K518ISE do on BMW FEM/BDC CAS2/3/4/4+?

Lonsdor K518ISE key programmer on BMW, what can it do?

This Lonsdor is verified to work no issues with CAS2, CAS3, CAS4, CAS4+ and FEM/BDC.


Lonsdor K518ISE CAS2/CAS3:

Program key

Disable and enable key

Synchronize ELV

Synchronize DEM

Update CAS3

Backup and recovery

Clear fault codes

Clear shadow

Force to recover CAS

Make key with EEPROM data


Make ignition key

Disable key

Enable key


Read key info

Preprocess FEM/BDC

Make dealer key enable key

Disable key

Delete key