topblog Ivoire blogs


XPROG-M Programmer 5.5.5 Read EEPROM FLASH of Audi A6 2005

Sharing!! pin out MCU with XPROG-M programmer, to read/write EEPROM and flash memory of 2005 Audi A6.

Device i used:
Lenovo T420
XPROG-M ECU programmer v5.55

Audi A6 Steering Lock 2005 with OEM 4F0905852B
MCU= 3L40K secured
read by XPROG-M
use adapter 1-002-0017
Eeprom + Flash

XPROG-M Programmer-1.jpg
I have done 4pc of this unit last month.
Short cables max 12cm long.
When it don’t read always try to lift reset pin
(I have never done it but some Xprog is sensitive and then try lift reset)
Operate by following my instruction, one friend used the adapter (BDM) and wires with a length of 10 cm. RESET leg lift.

XPROG-M Programmer-2.jpg
(the program automatically detect MC9S12 device type, flash memory size abd bypass MCU security.
Motorola HC(S)12-secured

MCU is dead! Work 100%

XPROG-M Programmer-3.jpg

XPROG-M Programmer-4.jpg

XPROG-M Programmer-5.jpg

XPROG-M Programmer-6.jpg

XPROG-M Programmer-7.jpg

06:45 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


PIWIS Tester 2 Development/ Engineer Mode, what can do?

With piwis tester 2 clone or original AllScanner VCX-Plus mux, three modes exists but only two modes can be available-- E (engineer/development) mode with German, V (aftersales) mode with multi-language. Details of PIWIS Tester 2 V16.2 Engineer/Development Mode is offered.

Tester 2-Engineer-Mode.jpg
Tools for Engineer Mode:
Piwis Tester II scanner
AllScanner VCX-PLUS Multi Scanner

What can Engineer Mode do?
1.start/stop”LAST MODE”wait for stopping the engine and change memory
2.spoiler”lessen time when the car starts
4.spoiler”change angle”
5.Change VO code
6.Close Air Mercury
7.Upgrade power
8.Remove the tire pressure sensor
9.Install reversing camera
10.Install USB/BT
11.Close the seat belt warning
12.Change CDR/PCM operation interface
13.Air condition memorization
14.Start CDR_AUX
15.Open the PCM function
16.Manually set codes
17.Automatically set codes
18.Manually do programming
19.Automatically do programming

Tester 2 V16.2 Engineer Mode display:

Tester 2-Engineer-Mode (1).jpg

Tester 2-Engineer-Mode (2).jpg

Tester 2-Engineer-Mode (3).jpg

07:05 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


VVDI MB BGA Tool Firmware Software Update

Original VVDI MB tool v2.0.5 has been released! But how to update vvdi mb software 2.0.5 correctly? Firmware update first!!.

1. How to update vvdi mb tool firmware
The program will read the newest software version from server automatically
Update firmware steps:
1) Connect VVDI – MB TOOL to PC with USB cable
2) Choose VVDI – MB TOOL firmware version from Firmware List
3) Press button Update Online, wait the progress for about 3 minutes
4) If failed to get firmware list or get something like “communicate with server error!”
while update your device, close antivirus and firewall programs, try again. Change
your internet provider once failed again
5) DON’T shutdown your PC or disconnect USB cable while update device

Reflash Firmware List
Update Online Tool will connect to server automatically and download the newest firmware information. You can press reflash picture button if there’s no display. After you get information success, will display current support firmware list, the software support by specify firmware and the mainly include update information

2. How to update vvdi mb tool software
This function require internet support
Use “Menu ->Update Online->Software Update” to obtain VVDI-MB TOOL latest
software version, the software version require firmware version etc. Press Download Link will download the latest software
If there’s no display for software version, shutdown your firewall and antivirus
programs, try again

Free download newest VVDI MB BGA TOOL V2.0.5.rar!H4RESJgA!ikXK2Uiq5JLSB_9yvUOAR3h592UNDw...

Update Information
This function require internet support
Use “Menu->Update Online->Latest Update Information” to obtain VVDI-MB TOOL latest update information
Use “Menu->Update Online->History Update Information” to obtain VVDI-MB TOOL history update information

09:03 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)