topblog Ivoire blogs

09/02/2016

what is difference among New Genius Master and Kess V2 Master

New Genius is Handheld KESS V2 version, more easily and convenient to use,And what is the difference between ordinary kess v2?

Here is difference Among New Genius Master and Kess V2 Master

Product Name New Genius Kess V2(SE87-C) Kess V2(SE87-D)
Language English, Italian, German, French, Spanish, Portuguese, Hungarian English, German, Spanish, Italian, Portuguese, French English, German, Spanish, Italian, Portuguese, French
Software -- V2.15 V2.15
Hardware V5.05 V4.036 V4.036
Tokens No Tokens Limitation,30 Tokens come with device by default, you can press the tokens reset button on the back of hardware to get new Tokens No Tokens Limitation,CD comes with token programmer, you can follow our video to program tokens. No need remove chips or desolder chips No Tokens Limitation, there is renew button on the main unit. This button is used to charge tokens. Once your tokens run over, just click this button, then tokens will go back to 30 tokens.
Update via hardware via hardware via hardware
Support Protocols upports CAN-BUS, KWP and J1850 protocols Line, CAN, EDC17 and MED17 and Ford J1850 Line, CAN, EDC17 and MED17 and Ford J1850
Support Vehicle Car, Bikes, LCV Support more new vehicle than Kess V2 New Genius ECU List Car and Bike Car and Bike
PC Hand-held ECU Chip Tuning Tool, no PC need; software is inside the machine already directly to use PC-based ECU Programmer, you need install the software by yourself PC-based ECU Programmer, you need install the software by yourself
Method Read and Write ECU via OBD2 directly same same

18:50 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

08/02/2016

Ford OBD2 Odometer Correct Immobiliser Key Programming Tool tests results

Ford OBD2 Tool is a newly released lightweight and friendly OBD device in obdexpress.co.uk.

It can read and write into EEPROM file, it can read out immo code, and directly edit key position byte, then replace the original key to a new key, also it can read out and write into the synchronized bytes of instrument and engine, then directly synchronize without programming.

Ford OBD Tool language available: English and Chinese.

Tested tool:
Ford OBD Tool

high-quality printed circuit board

SM51-FORD-OBD-TOOL-PCB-1.jpg

SM51-FORD-OBD-TOOL-PCB-2.jpg
Here is the test result about the FORD OBD TOOL.

Tested function:
Km change;
Key program

Tested vehicles:
Focus 2005…km change ok
Focus 2009…key program ok
Focus2 Restyle 2008…km change and key program ok
Focus3 2011…key program ok

C-Max 2008…key program ok
C-Max color 2008…key program ok
C-Max 2012…key program ok

S-Max 2006…km change ok
S-Max 2012…key program ok

Galaxy 2006…key program ok
Galaxy 2007…key program ok
Galaxy 2013…km change ok
Galaxy 2014…km change ok
Galaxy color…key program ok

Mondeo 2007…key program ok
Mondeo 2008…km change ok
Mondeo 2010…km change ok
Mondeo color 2012…km change and key program ok
Mondeo 2010…key program ok

Fiesta 2006…km change ok
Fiesta 2008…key program ok
Fiesta 2011…km change and key program ok
Fiesta 2013…key program ok
Fiesta 2014…km change and key program ok

Easy installation,Here is installation video guide
https://youtu.be/ljJ-E3JIjR8

12:44 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

05/02/2016

Perfect hardware Version ICOM for BMW FAQ

ICOM is the best diagnose and programming tool for BMW new and old models. Multi language. Perfect version is more steady, fast software running speed, adds more special functions.

Here is some FAQ for Perfect best V2015.10 BMW ICOM A2+B+C Diagnostic Programming Tool

part 1:
Q: I'm searching a tool which I can use to reset EWS, DME for E/F series, so I can apply used controll units. I already purchased Icom. Problem is the original bmw-software dont support DME, EWS coding on already used control units. That means I searching for a tool which can change VIN on control units.

A: Our icom can meet your needs. If your car is before 2015, then choose our 2015.1 icom software to do. our software has the engineer version. It can do the coding function, but the matter is you need to know how to use engineer version do it.this one has the single programming function. It can do coding. For original software, it does not have the single programming function. Original software support full system programming automatically, not single programming.

For original bmw software, if one ECU is broken, then it stops programming, it only support programming when all ECU meet its standard. and canceled many special function.

part 2:
Q: I get the V2014.12 BMW ICOM A2 interface and HDD,but get this error"database version mismach, the found database version are not compatible", could you help?
A: Please set the ISTA/D language as Amercian English.

part 3:
Q: Can you tell me the difference tool of the 2014.09 BMW ICOM A2 + B + C diagnosis and programming Tool with other BMW ICOM device?
A: The 2014.09 BMW ICOM A2+B+C Diagnostic & Programming Tool(SP168) can support wifi function. The other tool BMW ICOM can not do it. There is one wifi chip is the interface.

part 4:
When i install the software on my laptop, i meet this prompt "Device is configuration. do not change anything on network. Network changes may cause an inconsistant system and requires a reboot." how to solve it?

perfect-bmw-icom-a2-b-c-error-solution-s-1.jpg
A: Solution:
1) Change your laptop time to current day. Look at the right buttom of the interface. This time is over 10000. Normally this time should not over 10000.
2) Setup your HDD mode to "AHCI"

perfect-bmw-icom-a2-b-c-error-solution-s-2.jpg
3) Follow our BMW ICOM software operation video to do.
https://www.youtube.com/watch?v=d9MoiF9H1ek

If still cannot solve, then problem is that your laptop is not compatible with our software hdd. Please change another laptop to use. Or you can buy our laptop, we install the software and test it, then send it to you.

What should you pay attention to use this BMW ICOM:
1) DO NOT connect the internet or original factory servier.
2) DO NOT change the icom software setup
3) Change the PC time to the current time
4) NEVER TRY TO CRACK OR COPY OUR HDD.

12:50 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)