topblog Ivoire blogs

04/05/2018

Yanhua BMW MINI ACDP Key Programming Master

New Arrived!Yanhua BMW MINI ACDP Key Programming Master Work on iOS Android Supports CAS3/CAS3+/CAS4/CAS4+/FEM/BDC/Read ISN by OBD

Yanhua BMW ACDP MINI Key Programming Master

Radical change!

Subversion

 

Yanhua BMW ACDP Key Mater features :

Tesla car NO longer needs engines

YANHUA car keys programming NO longer need soldering iron

Car locksmith NO longer needs soldering work.

The first in the world

Programming no need soldering

 

BMW: CAS4/FEM/BDC/16ODOWT

yanhua-mini-acdp-programming-master-bmw-cas4-fem-bdc.jpg

Solder-free programming Data safety

WIFI connection Free connection

1. Overturn the traditional work mode

Single operation is changed to team cooperation

2. Change of operation mode

PC operation is changed to mobile phone operation

3. Change of test connection mode

Electric soldering iron is changed to no-solder dedicated

connector

4. Change from artificial observation to intelligent monitoring

Artificial observation / trying is changed to automatic

detection algorithm, grap hical in dication the relability

of connection. Ensure the data is not damayed and lost

5. Change of service mode:

Offline service is changed to online synchronous service

 

IMMO/Mileage Programming

No need to remove chip

No need soldering

 

Functions

1. Memory programming:

Support 93/24/25/35/95 series EEPROM in circuit (ICP)and on board(OBP)programming and parts of Freescale/ NEC MCU in circuit programming(ICP).

 

2. BMW module programming:

(1) Support cas1-cas4+and FEM/BDC IMMO key programming, mileage reset, program recovery.

(2)BMW engine ECU data reading and ISN code reading

 

3. VW module programming.

MMC instrument

4. Instrument mileage and airbag ECU reset/maintenance is under development.

5. BENZ. BMW Audi and various models are upgraded successively

 

yanhua-mini-acdp-programming-master-function.jpg

ICP: Memory and MCU programming In Circuits

yanhua-mini-acdp-programming-master-icp.jpg

MCU programming in Circuits

yanhua-mini-acdp-programming-master-mcu.jpg

No need to cut the line

No need to lift the pin

 

 

Src:

03:50 Publié dans Blog | Tags : bmw mini acdp | Lien permanent | Commentaires (0)

26/04/2018

How to raise and lower idle rmp using a Tech II scanner

Confirmed! Tech II scanner is able to raise and lower the idle!

 

It’s possible for GM vehicles to get the ecm reprogrammed for the fast idle increase. your local dealer should be able to help you out. here is how it works.

 

Subject: 

Programming ECM For PTO Idle Up Operation

 

Models:  

2001-2007 Chevrolet Silverado Classic

2003-2009 Chevrolet Kodiak

2001-2007 GMC Sierra Classic

2003-2009 GMC TopKick

with 6.6L or 8.1L Engine

 

How-to’s:

 

Connect the Tech 2 and follow the steps below to program the ECM for idle up feature with PTO operation:

 

Turn on tech 2 and build the vehicle

 

select “Powertrain” (Or “Vehicle Control Systems” on later models)

 

select “Special Functions” (or “Module Setup” on later models)

 

select “PTO Options”

 

select “Change Options” (soft key at bottom of the screen)

 

select F1 “PTO Preset Speed Control”

 

select pto max engine speed set to 2200 – 4400 rpm (not below 2200)

 

 

Note: These steps will not allow the engine rpm to exceed the rpm setting, even during normal driving if the PTO switch is on

 

select stand by speed (base fast idle ) set to 1200 (this setting is initial fast idle)

 

select PTO set speed – set to 1400 rpm

 

select PTO resume speed – set 1700 rpm

 

select PTO max engage speed – set to 1800 rpm (PTO engagement inhibit speed)

 

select PTO engine shutdown – no

 

select PTO engage relay – no

 

select PTO feed back -no

 

select “Reprogram” (soft key at bottom of screen) “Waiting For Data” displays on screen-once data comes back verify settings remain

 

key off- until tech 2 “beeps” and screen shows “no communication” (Very important step if missed setting will not store)

 

key on – verify settings remain on list

 

operate pto

 

25/04/2018

How to Use KEYDIY KD-X2 to Identify Chip Type?

 

How to use KEYDIY KD-X2 Remote Generator Transponder Cloner to Identify Chip Type

 

Video shows:

Put the chip you want to identify into the chip slot,then press the “Chip Identification” button.

keydiy-kd-x2-remote-unlocker-cloning-4

keydiy-kd-x2-remote-unlocker-cloning-5 keydiy-kd-x2-remote-unlocker-cloning-6 keydiy-kd-x2-remote-unlocker-cloning-7

 

What’s the KEYDIY KD-X2?

1. Power supply: 2600mAh lithium battery; Charge method: USB 5V/1A

2. With 0.91inch OLED display screen.

3. Bluetooth BLE4.0 inside, work with mobile KD app by bluetooth connection

4. Can work with PC software by USB-B connection, and work with Android phoneor tablet by OTG connection.

5. With PS-2 interface for connecting remotes to generate.

6. Three functional shortcut buttons: chip identification, remote identification and frequency detection.

7. Basic functions as below:

1) Wired Generation.

2) Wireless Generation.

3) Mobile Phone Simulation.

4) Garage Door Generation.

5) Proximity Key Unlock.

6)  Frequency Detection.

7) Infrared Detection.

8) Access Card Copy.

9) Fixed Code Remote Copy

10) Online HCS Remote Copy.

11) Online Chip Copy ( 96 bit 48chip, 46chip, 4Dchip, Toyota chip etc. )

12) Chip Generation.

13) Chip Editing.

14) Chip Simulation.

15) lgnition Coildetection.

16) Remote Data Backup.

17) Additional Functions Will be Available in Succession.

18) Free Activation of 96 Bits 48 Transponder Copy (No token required)

Src:

03:41 Publié dans Blog | Tags : keydiy kd-x2 | Lien permanent | Commentaires (0)