topblog Ivoire blogs


Renault Can Clip V188 V187 Download Free

In this post, you can free download Renault Can Clip 188 187 185 184 183 182 181, which are tested working fine with RLT2002 clone or genuine, Renault/Nissan Alliance VI probe, Renault Can Clip etc.


Free download Renault Can Clip 188!bY0TSQYJ!I4OjHdEqbdpPQMDyYMRrW0ez3JA1oC...

No password

Security: unknown (shared in forum)


For RLT2002 clone or genuine you have to replace that two files as in v185, v186 or v187

For Renault/Nissan Alliance VI probe you don't need to do anything.

Good luck


Free download Renault Can Clip 187 - Torrent on mega!cVRhjaCA!pg5jLiq3l0Ia12McXQmGGi5Ql-E7mS...

No password

Security: unknown (shared in forum)


Year / Release Date: 2019

Version: Renault CAN Clip 187

OS: Windows 7, 10 x32

Language: Multilingual (English, French, German, Italian, Russian and other)

Medicine: inside

Description: The program for the diagnosis of electronic systems of cars Renault, Dacia and Samsung. Working with scanner Renault CAN Clip only.

How to activate Renault Can Clip 187:

Look on ReadMe!.txt (Inside the folder "Activation (Patch V3)")



If you want - there are older & stable versions [all can work with Renault Can clip Clone (China RLT2002 probe)]


Renault CAN Clip V185 torrent:!dRhhgSIK!AznL5QDKgOd0qpqEGxGqPjsrmWA304...


Renault CAN Clip V184:

For those who have a connection problem with interface RLT2002 (ori or clone):

You must modify 2 files in version 185 (Computer >>> Disk C >>> Clip >>> Config):

I leave here the download of the file :!dEpkTQKZ!LLcV-JFbZZnmNPYOyDddww


clip v184-02


Renault CAN Clip V183 torrent:!9c5jhAqT!3d0loW6W9LVV2YjoVSPF6WHgty_kY-...

clip v184-03


Renault CAN Clip V182 torrent:!FN5FFAQC!Mc_YqdVmeHu7i-5fK_IIGyxKW6jFg-...


Renault CAN Clip V181 torrent:!BVwjRKhR!smlYv9N8o89z3iCvI_KkeswBTMJN67...



  1. For the China RLT2002 probe, change the file, "AA_VIMSelection.dll".

I leave here the download of the file :



  1. For those who have a connection problem with interface RLT2002 (ori or clone):


You must modify 2 files in version 185 (Computer >>> Disk C >>> Clip >>> Config):


- probesConfiguration


and - probesConfiguration_logs (normally both at the bottom)


If you are in V184, recover these 2 files, install the V185 and modify the files




Small Reminder: If a Clip Version is already installed on your PC DO NOT REPEAT activation procedure


Files in pj (no pass)!dEpkTQKZ!LLcV-JFbZZnmNPYOyDddww






How restall XS evolution Lexia probe On Windows 7

Here is the user experience of lexia3 PP2000 scanner ,about how to upgrade XS evolution Lexia probe On Windows 7


Here you are:

I have a probe XS evolution acquired in 2009 clone version Normal (not full chip, see photos attached) that had been delivered with the LEXIA software version 345.13.

I used it for several years and even upgraded to V346.01 (by mistake) from the Citroen server on a PC that was running on XP.

I no longer have a PC in XP, this probe has always brought me satisfaction, so I want to proceed to a soft re-installation on a PC dedicated to the diag and who has already can clip, PC running Windows 7 32 Bits,

– My Lexia 345.13 soft distribution certainly does not turn on windows 7, should I install Diagbox?

– Can my old probe work with recent versions of diagbox?

– Can there be a problem of firmware version, firmware / diagbox incompatibility?

– I have no idea of ​​the firmware version of the probe that I have, How can I identify it?



I have now completed the installation of Diagbox 7.02, the installation proceeded normally according to the detailed procedure here


Small comment at the end of the installation of diagbox 7.02, the directory C: APPLI containing the PSA Interface Checker had disappeared without explanation.

At the first launch of Diagbox, updates were made automatically and the firmware of the probe was also updated.

A first attempt of DIAG does not point out any error and obliges me to manually enter a number of OR and a VIN.

Bizu Diagbox (I used the Lexia GUI) it seems to me that the VIN should read automatically in Lexia, also not knowing my VIN, I did not try to go beyond judging the abnormal situation.

I tried to run Scantools rather than Lexia and my interface is declared not properly initialized, message “The communication card has not started correctly, It is necessary to restart the tool”

Anxious about the operation of the VCI I reloaded PSA Interface Checker to confirm that it has been updated, it is still recognized as “ACTIA USB Device – USB Com Board Driver (Multi Instance)” in the device manager , The version of the interface is now “APPLI_XS_Fuji_P106138A V4.3.0 @ACTIA 02.01.12”

– Do I have 2 left hands not knowing how to use Diagbox to run a LEXIA diag and read the VIN?


– Should I fear a VCI probe incompatibility problem with Diagbox?


– A problem with the operation of the new firmware or incorrect loading?

According to the excellent post


it seems to me that a V4.3.0 should work with Diagbox 7.0.2 so not a problem of incompatibility, and even if this probe remains a version B it should work without requiring flashing version C XS Evolution.

I want to add that the diag test was done on the same vehicle as before the migration and that my VCI was in perfect working order before migration on Windows 7 + Diagbox + Update firmware probe. I unfortunately cannot afford to check it to remove the doubt of a hardware pb,

Another observation that may be important. PSA Interface Search in serial number: “963830 B /” followed by several spaces and end of line “PEUGEOT”.

Could it be that I do not have serial number on this probe?


Question followed:

As you have been advised above: You have to change the bootloader (and at the same time the serial content in the SPI) of your microphone so that the probe is recognized with an “evolving” driver: for that two methods is that of nlc is the direct flash by the 2x6pts connector on the micro card (and the universal programmer for the SPI)

For the first method: you have to find (on the web) the firmware of nlc non nominatif …. hush !!!!!

For the second method: you have to find the file of the microphone and that of the SPI as well as a prog for the microphone MB90F and a universal prog for the SPI (to unsolder or to flash on card with a clip SOIC).

That’s for short … it will allow you to remove any doubt about a compatibility problem with DIAGBOX and then lean on a possible hardware problem.



Thanks for this confirmation of the only issue and need to migrate in evolution mode with upgrade bootloader and SN.

Not that I do not feel like implementing the Hard N ° 2 method that you describe, the solution N ° 1 NLC mode seems much faster to implement with a risk of success rate reduced, I will continue this way.

FYI, however, I managed to run my VCI and lead a diag by forcing the firmware in V4.2.4 (prior to V4.2.8) and prohibiting diagbox 7.02 update the firmware of the probe at startup.

The VIN is then recognized and LEXIA turns for diagnosis.

The stability of communication does not seem at the top, however, I had crashes that I attribute to a situation a little wobbly from a point of view coherence between USB driver of the VCI (bootloader), the Firwmare V4.2.4 and not V4.3.0 as expected by Diagbox 7.0.2, however, I can not consider this situation as stable.

At Minima it gives me the indication that my hardware is OK.


Credits to @barsailer from


Thanks to Laurance for collecting this info.


PP2000/Lexia-3 Interface


Download & win7 install SDD V157 for SVCI DoIP Jaguar Landrover diagnosis

Topic: Download SDD V157 full software & driver to install on STIC SVCI DoIP for diagnosing  Jaguar Landrover 2005-2019.


STC SVCI DoIP with SDD V157 advantages:

  1. Easy to install.
  2. Able to connect network connection.
  3. Multiple language available
  4. Auto VIN read
  5. Has service functions.



First, download SDD V157 full software at:


Second, download SVCI DoIP D-PDU and Passthru Driver v1.3 (offered by Fly Company)

Have one SVCI DoIP cable from one dealer, you will have one CD contained with SVCI DoIP D-PDU and Passthru Driver v1.3.


Youtube Video on how to install SDD V157 on Win7 for Jaguar Land rover diagnosis:



Right click on "SDD_157_Full", select "Run as administrator".



Select the Language:

Chinese (simplified),


English (United States)

French (standard)





Portuguese (Brazilian)

Portuguese (Standard)





Click on "Next" to continue...


SDD 157 installation requires the newest Adobe Reader, click on"OK" to upgrade.



It pops up "Would you like ActiveCGM to be the default TIF viewer?

Click on "No".




Click on "HV Safety" to install.





SDD is configuring your new software installation.




Setup MOXA UPort 1110/1130/1150 Windows Driver Ver1.6 on your computer.

Click on "Next", then "Install", then complete.




SDD is configuring your new software installation, it will take several minutes.

InstallShield Wizard complete.

Restart the computer.



Back to DVD, right click on "SVCI DoIP D-PDU and Passthru Driver Set..."

Select "Run as administrator".



Select Language (English and Chinese only)



Click on "Next";

Click on "Next";

Click on "Next";

Click on "Install";

Click on "Finish", complete the SVCI D-PDU and Passthru Driver Setup Wizard.



Connect SVCI DoIP cable to the computer, wait until the device is ready to use.




Right click on "Computer" - "Manage" - "Device Manager", wait until you can see "COM5" , which means SVCI DoIP cable has established a good communication with the computer.



Right click on "JLR SDD" and select "Run as administrator".

Launching SDD.


Click on "Continue".



Click on "Continue". (SVCI DoIP cable is allowed to connect network connection)



Enter dealer information.



Click on "Continue", at the right corner you can see "Device Connected".



Click on "AutoVIN Read".


Select "High line instrument cluster".


Click on "Diagnosis".



Select "System" (SVCI DoIP can access to Land Rover L319 Chassis, Powertrain, Electrical, Body etc).



Select "PCM", then "View DTCs for PCM module".




Select "Market specification".


Loading recommended Candidates.



DTCs by ECU.



Besides, SVCI DoIP can also perform service Functions, it's up to you to continue.


Have a fun.


13:45 Publié dans car diagnosis tool | Tags : sdd jlr | Lien permanent | Commentaires (0)