topblog Ivoire blogs

21/06/2019

YH35XX programmer + Simulator correct 35128 odometer: No red dot

F chassis 35128WT eeprom odometer correction best solution: Yanhua YH35XX programmer + Simulator, because it has no risk, no red dot and easy to use. It wins many similar tools i.e Smelecom 35128 emulator (supports a part of 35128WT eeprom) and VVDI Pro (can't work yet).

Steps:

Prepare: one computer

Features: No risk, no red dot. Easy to use.

 

  1. Remove the original 35XX EEPROM from the odometer and solder it to the adaptor board.Then clamp the adaptor board with the solder-free clamp. Ensure the direction of the adaptor board and solder-free clamp is correct.

yh35xx-programmer-simulator-user-manual-01

yh35xx-programmer-simulator-user-manual-02 yh35xx-programmer-simulator-user-manual-03

 

 

2.Connect the YH35XX programmer to the USB port of the PC, click on "computer" and it will recognize a usb flash drive named 35XX programmer.

yh35xx-programmer-simulator-user-manual-04 yh35xx-programmer-simulator-user-manual-05

 

 

3.Click on U disk35XXprogrammer, double-click "BMW_ODO_Standard_edition. exe" to open the software.

yh35xx-programmer-simulator-user-manual-06

4.Wait until it pops up: Programmer connection successful, then run it.

yh35xx-programmer-simulator-user-manual-07

 

5.Choose the EEPROM model and click on "Read DATA+ID", check whether the mileage that is read out is the same as the actual mileage.

yh35xx-programmer-simulator-user-manual-08

6.Click on "Save Data File", save the original data of original EEPROM to the folder.

yh35xx-programmer-simulator-user-manual-09

 

7.Hold the handle of the simulator, clamp the Simulator with the solder-free clamp. Pay attention to the direction. Then connect the solder-free clamp to the programmer, connect the programmer to the PC.

yh35xx-programmer-simulator-user-manual-10 yh35xx-programmer-simulator-user-manual-11 yh35xx-programmer-simulator-user-manual-12

 

8.Choose the EEPROM model, click on "Load Data File", choose the corresponding data of original EEPROM and load it. Check whether the displayed mileage is the same as the mileage displayed in odometer.

yh35xx-programmer-simulator-user-manual-13 yh35xx-programmer-simulator-user-manual-15

 

9.Once the mileage is confirmed, click on "Write DATA+ID", write the original data into the Simulator.

yh35xx-programmer-simulator-user-manual-15

10.Click "Read Data+ID", read the data written into the Simulator, and check the mileage.

yh35xx-programmer-simulator-user-manual-16

11.After the mileage is confirmed, click on "Mileage modification" and input the mileage you want.

yh35xx-programmer-simulator-user-manual-17 yh35xx-programmer-simulator-user-manual-18

 

12.After confirming the input mileage is correct, click on "Write DATA+ID" to write the modified data into the Simulator.

yh35xx-programmer-simulator-user-manual-19

 

13.After the data is written, click on "Read DATA+ID" to check whether the mileage modification is correct.

yh35xx-programmer-simulator-user-manual-20

 

14.If the displayed mileage is the same as what you want, cut off the handle of the Simulator, and solder the Simulator to the original EEPROM position. Pay attention to the EEPROM direction. Install the odometer back to the car to verify whether the mileage modification is successful.

yh35xx-programmer-simulator-user-manual-21

Yanhua YH35XX programmer + Simulator tech support is always available at

www.obdexpress.co.uk

Source:

http://blog.obdexpress.co.uk/2019/06/03/yh35xx-programmer...

20/06/2019

VOCOM II: Change Volvo Truck's Chassis ID in TechTool Offline

Topic: VOCOM II 88894000 TechTool Offline change Volvo Truck's Chassis ID.

 

Vocom II interface Vs. Vocom I interface:

Improved LED indicators

Improved quality of cables

Military standard on connectors

Better liquid and dust ingress protectors

Metal casing and rubber bumpers for better protection

Operates from -40 Celsius to +85 Celsius

Shock resistance: 2 meters

vocom-ii-88894000

Here we go for changing Volvo Truck's Chassis ID in TechTool Offline:

Click on "Tech tool" icon.

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_01

Tick off "Work offline", then click on "OK".

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_02

Version 2, FH12.

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_03

Vocom II (USB) s connected to the computer.

Product data: collecting parameter data...

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_04

Click on "Diagnose" and get DTCs.

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_05

 

Click on "Program", then "Service and maintenance".

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_06

Parameter, programming.

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_07

All levels -> Start -> tick off "the engine must be switched off" and "The parking brake must be applied".

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_08

 

Read data from the control units...

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_09

Chassis ID B 220228

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_10

 

Open "Tech Tool" to enter "Chassis", then click on "Chassis ID", then "Set Programmable", then "OK" (Parameter is stetted for programming).

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_11vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_12

 

Click on "Stop", then "Start", tick off "the engine must be switched off" and "The parking brake must be applied".

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_13vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_14

Reading data from the control units.

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_15

 

Set the new chassis ID to B444444, click on "Program".

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_16vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_17

 

Use current chassis ID B 444444.

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_18

 

Have new Chassis ID B 444444, Model FH12, Version 2.

Vocom II (USB) s connected to the computer.

Product data: collecting parameter data...

vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_19vocom_ii_88894000_how_to_change_volvo_trucks_chassis_id_in_techtool_offline_20

Job is done.

 

Source:

http://www.obdexpress.co.uk/service/how-to-use-vocom-ii-8...

19/06/2019

2012 Discovery 4 OBD km change with OBDSTAR X300M

Topic: 2012 Discovery 4 OBD km change

 

The car: 2012 Land Rover Discovery 4

obdstar-x300m-discovery-odometer-correction-2

The original km: 153503

obdstar-x300m-discovery-odometer-correction-1

The final km: 149999

obdstar-x300m-discovery-odometer-correction-19

The odometer correction tool:

OBDSTAR X300M

 

The odometer correction process:

select the function in X300M:

vehicles - cluster calibrate

 

obdstar-x300m-discovery-odometer-correction-3 obdstar-x300m-discovery-odometer-correction-4

select the sw and vehicle:

sw: land rover 30.73

 

obdstar-x300m-discovery-odometer-correction-5 obdstar-x300m-discovery-odometer-correction-6 obdstar-x300m-discovery-odometer-correction-7

vehicle: discovery 4

obdstar-x300m-discovery-odometer-correction-8

Obdstar starts to do change mileages

obdstar-x300m-discovery-odometer-correction-9

Tips:

km range: 0-700000

generally maximum error does not exceed 206km

obdstar-x300m-discovery-odometer-correction-10

Pls input the mileage for adjustment

obdstar-x300m-discovery-odometer-correction-11 obdstar-x300m-discovery-odometer-correction-12 obdstar-x300m-discovery-odometer-correction-13

km will be changed to 150000

obdstar-x300m-discovery-odometer-correction-14 obdstar-x300m-discovery-odometer-correction-18

The result: odometer correction success!

obdstar-x300m-discovery-odometer-correction-19

The new km is displayed on the dashboard

 

http://www.mileageprogrammer.com/2012-land-rover-discover...