topblog Ivoire blogs

07/05/2019

How to bound Yanhua Mini ACDP in different mobile phone?

Confirmed: Yanhua Mini ACDP is allowed to bound in more than one mobile Phone, not only one phone. But only in one mobile phone at the same time, if you want to bound another one mobile phone, this former one needs to be unbound.

 

You can use your mobile phone to unbound by yourself, or you can press the "Reset" button on the Yanhua Mini ACDP to unbound.

 

Mobile phone bound to Yanhua Mini ACDP Procedure:

yanhua-mini-acdp-bound-mobile-phone-01

->Open the Bluetooth and connect the WI-FI

yanhua-mini-acdp-bound-mobile-phone-02

->Open the ACDP on your phone and click setting as the following icon

yanhua-mini-acdp-bound-mobile-phone-03

->Click "Initial use settings"

yanhua-mini-acdp-bound-mobile-phone-04

->Following the directions:

press and hold the "SET"button ,after 7 seconds,ACDP 's buzzer sounds"Di~~~" and finish initial programming process

yanhua-mini-acdp-bound-mobile-phone-05

->Choose the Bluetooth device

yanhua-mini-acdp-bound-mobile-phone-06

->Enter the password of WI-FI, the clic Start configuration

 

yanhua-mini-acdp-bound-mobile-phone-07

->Bond the device

yanhua-mini-acdp-bound-mobile-phone-08

->Done!

 

Yanhua Mini ACDP tech support is offered by www.obdexpress.co.uk

 

http://blog.obdexpress.co.uk/2019/05/06/bound-yanhua-mini...

05/05/2019

SVCI DOIP vs JLR VCI DOIP vs DA-Dongle DOIP

Planning to buy a cheap JLR DoIP diagnostic tool? we review three of the best in the market 2019. Let’s go!!

svci-doip-vs-jlr-vs-da-dongle-1

SVCI DOIP vs JLR VCI DOIP vs DA-dongle DOIP:

Products SVCI DoIP JLR VCI DoIP DA-Dongle DoIP
Installation requirements Unlimited Unlimited Only win7 32bit
Installation process Simple Simple Complex
Communication speed Fastest faster Relatively slow
Communication stability Stabilization Stabilization General
Automatic scan to read VIN
Read DTC
Read single date stream
Read multiple date streams
ECU refresh
ECU configuration

To sum up:

SVCI DoIP wins!It has the fastest speed and easy to use,supports read VIN / DTC and ECU programmer.

More info of SVCI DoIP below here:

1. What is the SVCI DoIP?
2. What JLR vehicle models are covered via STiC SVCI DoIP?
3. How to use and operate SVCI DoIP?
4. How to install PATHFINDER software for SVCI DoIP
5. How to install SDD2 and SDD2 "QuickLoader" software for SVCI DoIP
6.How to connect SVCI DoIP to your Jaguar or LandRover

 

1.What is the SVCI DoIP?

The SVCI DoIP Vehicle Communication Interface (VCI) is used by professional technicians as an aid in diagnosing and repairing vehicle electrical and electronic systems. The SVCI DoIP is designed to connect the vehicle to a host PC computer application which achieve functions through the  SVCI DoIP for data transfer and Electronic Control Unit (ECU) reprogramming. Using the VCI Manager PC application software, The SVCI DoIP is capable of communicating over a USB cable.

The SVCI DoIP is a standard-based tool – supporting the SAE J2534 interface, and the ISO22900-2 Diagnostic-Protocol Data Unit (D-PDU) API. Fully support JLR diagnostic software SDD2 and Pathfinder, including diagnostic, ECU update, CCF configuration and all the functions of JLR.

Appearance

Technical Specifications

Protocol Type                                           Protocol name

Physical Layer        
l CANBUS Channel 1 at 125/250/500/1000kbps
l CANBUS Channel 2 at 125/250/500/1000kbps
l One UART channels (K & L Lines)
l One J1850

Communication  Layer   
l ISO9141
l ISO14230
l J1850 PWM(Ford SCP)
l ISO14229 JLR Powertrain CANBUS
l ISO14229 JLR Body CANBUS
l ISO14229 JLR Chassis CANBUS
l ISO14229 JLR Comfort CANBUS
l ISO13400 DoIP

Others  
l Pin voltage Measurement
l Programming Voltage Generator
l Internal Temperature Sensor
l Power through DLC or USB Type B Connector

2.What JLR vehicle models are covered via STiC SVCI DoIP?

Software Name Vehicle Name Model Years Support’s functions
SDD2 Land Rover L316 2005~2016 All
    L319 2005~2016 All
    L320 2005~2016 All
    L322 2005~2016 All
    L359 2005~2016 All
    L405 2005~2016 All
    L494 2005~2016 All
    L550 2005~2016 All
    L538 2005~2016 All
  Jaguar X100 2005~2016 All
    X150 2005~2016 All
    X152 2005~2016 All
    X202 2005~2016 All
    X250 2005~2016 All
    X350 2005~2016 All
    X351 2005~2016 All
    X400 2005~2016 All
Pathfinder Land Rover L405 2017~latest All
    L494 2017~latest All
    L462 2017~latest All
  Jaguar X152 2017~latest All
    X761 2017~latest All
    X760 2017~latest All
    X260 2017~latest All
Note: All JLR models produced after 2016 are applicable for pathfinder software, SVCI DoIP device will constantly update and support the latest JLR models.

3.How to use and operate SVCI DoIP?

If you want to use the SVCI DoIP device normally, you have to download and install three software, they are Pathfinder, SDD2 and SDD2 "QuickLoader" software. These three software can be installed in the same operating system together, and when you use SDD2 software,  you have to open it from the SDD2 "QuickLoader" software. And when the software is installed, the device needs to be connected to the laptop and vehicle. The Pathfinder software is primarily intended for Jaguar Land rover models manufactured in 2017 and beyond, The SDD2 software is mainly aimed at Jaguar Land rover 2016 years models and before.

4.How to install PATHFINDER software for SVCI DoIP?

Step 1: Before installing the software, you need to make sure the C drive has a capacity of more than 250GB.
Step 2: Access to software download center http://www.flyobd.com/shop/download-center/
Step 3: Select “Pathfinder” item and download pathfinder installer
Step 4: Double-click the file that you download and saved, and then install it.
Step 5: The pathfinder installer will automatically prompt you to download and update the software and files you need to install pathfinder(The automatic download and installation will takes up to 24 hours according to network download speed).

5.How to install SDD2 and SDD2 "QuickLoader" software for SVCI DoIP?

Step 1: Download software from http://diagnosticdelivery.jlrext.com/idscentral/
Step 2: Select the “SDD_xxx_Full.exe” file, download and save it.
Step 3: Double-click the “SDD_xxx_Full.exe” file and install it.
Step 4: Select SDD2-"QuickLoader" item from http://www.flyobd.com/shop/download-center
download and install it.
Step 5:Double-click the “SDD2 "QuickLoader.exe” file and install it.

6.How to connect SVCI DoIP to your Jaguar or LandRover?

After installed the software, you need to connect the equipment to the computer using a USB cable. Then connect the OBD interface of the vehicle through SVCI DoIP device, or connect the OBD interface of the vehicle and the equipment through the OBD extension cord. The equipment connection diagram is shown as below.

Source:http://www.obdexpress.co.uk/wholesale/svci-doip-jlr-vci-s...

 

2012 Land Rover Discovery 4 OBD Cluster Calibration via obdstar X300M

Used obdstar X300M for 2012 Land Rover Discovery 4 Cluster Calibration via OBD succeed.

 Video demo:


Simple to use:

Old kilometer value: 153503KM.

 

obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-01

Hook obdstar X300M up to Discovery 4 via OBD, choose "Vehicle".

obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-02

 

Cluster Calibration.

obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-3

 

Land Rover, then Discovery 4.

obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-4 obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-5 obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-6 obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-7

 

Mileage adjustment

obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-8 obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-9

 

Please input the mileage of adjustment directly.

obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-10 obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-11 obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-12

 

Adjustment complete.

obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-13

 

Get new mileage value on the dashboard.

obdstar-x300m-on-2012-land-rover-discovery-4-obd-cluster-calibration-14

 

Done.

obdstar X300M is good and fast to correct mileage for 2012 Land Rover Discovery 4 via OBD2.

 

OBDSTAR X300 DP PLUS also supports 2012 Land Rover Discovery 4 odomter correction via OBDII,here is the video demo below:

http://www.mileageprogrammer.com/2012-land-rover-discover...