topblog Ivoire blogs


How PCM reprogramming with VCM2 SP177-c


VCM2 communication issues:

VCM2 IDS cannot communicate with PCM:


No puede establecerse comunicación con el PCM

De el contacto

(Error message in English: Communication with the PCM can not be established

From the contact)


VCM2 Tech support:

It’s normal…

You can use the old version IDS 86 software


the latest version IDS 108 CD tested by pros

Then the problem will be solved!


Tips: PCM reprogramming with VCM2 SP177-c

Step 1: Select the toolbox tab at the top of the screen

Step 2: Select “Module Programming”

Step 3: Select the tick mark or the Enter key

Step 4: Select “Module Reprogramming”

Step 5: From the fly out menu, select the type of module to be reprogrammed

Step 6: Select the tick mark or the Enter key

Step 7: The application will compare the current calibration level to the latest one available for that vehicle. A message will appear.

Step 7A: If no later calibration is available, a message will appear indicating this. Select the tick mark or the Enter key to return to the Module Programming menu.

Step 7B: If a later calibration is available, a message will appear asking if you want to reprogram the module with this calibration. If you do not want to reprogram the module, select “No”. You will be returned to the Module Programming menu.

Step 8: If you want to reprogram the module, select “Yes” in response to the question “Do you want to program the vehicle with this calibration?”

Step 9: Make sure that an Internet connection has been established and then select “Confirm”

Step 10: You will be presented with a screen that recommends that you carry out Self Test. If you choose to complete this test, you will receive a list of Diagnostic Trouble Codes (DTC’s) that have been set on the vehicle. When finished viewing this list, select “Exit”.

Step 11: Follow the on-screen instructions to prepare the vehicle and turn the ignition key off and on.

Select the tick mark or the Enter key after each one.

Step 12: If necessary, apply the reprogramming label to the PCM

If an emissions recall has been performed or a required emissions-related TSB has been completed, an Authorized Modification label must be placed on the PCM. These labels can be purchased at the parts counter of a Ford or Lincoln/Mercury dealership.

Step 13: Select the tick mark or the Enter key to return to the Module Programming menu.




Btw, PCM unrecognized solution:


10:24 Publié dans car diagnosis tool | Tags : vcmii | Lien permanent | Commentaires (0)


Free download: Nissan Consult 3 (Plus) v81 v75 v73 v72 v65 software

Free download Consult 3 (Plus) v81 v75 v73 v72 v65 software + license + immo NATS (GEN) for Nissan diagnostics, reprogramming and key programming.


consult3+ v71 full pack +ECUblank +ecu conf.+manualOPM!LZURVSaA!Cdc07obdoqoXIpgLh0Upsq0zqVbcYF...


Consult 3 license!nMNRXA4C!X83irpCpbhAtXFCE0TPnuzLijOp6pZ...


Consult 3 immo solution – immobilizer unlock (Unknown security)!OdFmURCA!tyv-3tXTt-3csrTvvaiK6CisnC1qLV...


Consult 3 plus Nissan immo solution (tested!)


Consult 3 plus GTR immo solution (tested!)


Consult 3 reprogramming solution (tested!)


Nissan NATS GEN!XA0yiCjI!Gs8XvD3ScXSbY1LOWots5iC4B3UukY...


Consult 3 v72 (Unknown security)!QRoFjJbT!XzdDluU9ZseXYhJEDafbWP8L-4CVdL...

Consult 3 v72.60 (Unknown security)!IU5hUZxb!gVUVuxHJQ5l6rCSwp9uZH2gt58eeoJ...

Consult 3 v73.20 (Unknown security)!lRYXzY7Y!nzvohE6OAFBdVzbLfK_JvAWGLx5Eln...

Consult 3 plus v65 (100% tested!)!SNoHnDza!3SyKYvVyKkp218uj2ht40q0lI50ttE...


Nissan Consult 3 Plus V71.11.00+Update 71.20.00 (No pass; unknown security)!24QiyTrL!nUD0I72KrCxVuQHxFpnnJrojayWKx2...


Consult 3 plus v75 (100% tested!)!WYYmiQ6J!QDCblZBomUBfEkTUEHd9ZCHWzV0cUK...

Conslut 3 plus v81.10 (Unknown security)!xAxiBYgZ!mnw79KLg-mriA2YoESoz1ZQWeeSuf9...

Consult 3 v81.11 v81.40 v81.50 (Unknown security)!dZ4gmajQ!977arAOoZrIlic575puaDqyidwil-N...  

Source: (Many many many thanks to gpdriver)

Ps. Any password required, pls go


Consult 3 images:



Renolink Renault OBD2 ECU Programmer Reviews

I use Renolink Renault OBD2 ECU Programmer for:
Renault clio 3 2008, DCM 1.2 Ecu mileage change-OK
Renault twingo 2 2008 dashboard mileage change-Ok
Renault megane 2 2008 key card programming-OK
Renault megane 3 2009 ecu km SID 305 mileage-OK
Renault megane 3 2012 ecu km SID 307 mileage-not OK, read Ok, write km changed successuful but didnt change



– good tool airbag clear crash full 2017+ uch and key and read pin good just km change little bad not supported new 4 series and ecu change km.


– On some versions software airbag unit RSAT4 Logan2/Sandero2 ph1/FL, SPC processor, LED failure on dash not getting off, no failure indication present, reset button stays grey ( inactive )
I am not fond of resetting airbag units but if you want do this, beware.





– Renault Laguna 3, 1.5dci, manual trans., 2011, we change instrument cluster and we have ERROR PROG fault on dash…

I made this job with Renolink. It’s easy to do this, because has a lot of functions. It’s special tool for Renault.




I prefer to this site:

  1. They produce Youtube video on how to install Crack Renolink ECU Programmer, so the guys are responsible and worth to trust.


  1. Crack Renolink ECU Programmer can really work for what you paid.

It is as cheap as less than 40USD.

Package list: