topblog Ivoire blogs

06/09/2018

Ford IDS 110 download FREE: 100% tested

Ford IDS 110 download FREE:

ford-ids-110-download-1

 

ford-ids-110-download-2

 

FORD IDS 110.01 & cal 91 Native install 2018

ford-ids-110

 

ford-ids-native

 

IMPORTANT: Ford IDS 110 above has NOT been tested by real professionals.

If you are looking for IDS with security and relief, this is what you should have;

You can find that Ford IDS 110 is updated there.

Confirmed to work with VCM2 SP177-C1 and VXDIAG VCX NANO Ford

 

 

 

How to install Ford IDS 110 software:

 

Ford IDS 110 Install – Video Help:

 

 

Important: INSTALL V110, WITH THE INTERNET CONNECTED ON YOUR COMPUTER

SETUP V110 WILL DOWNLOAD AUTOMATICALLY, C98 CALIBRATION FOR DATABASE

 

 

Step by step install Ford IDS 110:

 

1- Install the ids 86 before changing the date to 1 07 2015

 

(hold the date 1/7/2015 ,, until you finish step 5

every time you restart your computer, check the date, if it is  on 1/7/2015)

 

2- install patch ( choice option 2 )

 

3- Make a backup of your windows system (I recommend, this is optional)

 

4- Open the program with the interface connected ,,( choose NON DEALER,when open program for first time ) , keep vcm turn on,on the computer.

 

5 – create a restore point,,,then turn off vcm of the computer

 

6 – Okay, now install the new version,  v110.01,, before install, 110,01 version, change the date of your computer, to the current day

 

7- After installing, go back to the restore point, which you created in step 5, activate this restore point, and then open the program

 

8- Finally, install FordExtendProgram (click right mouse button click on, run as administrator)

 

Done, will work in the new version

 

 

03/09/2018

How to solve VCM 2 SP177C cannot read voltage on obd pin 16

VCM 2 SP177-C voltage issue:

 

I have one of my VCM 2 SP177C that doesn't read voltage on obd pin 16.

It does power up, but when trying to program, I get a message saying vehicle battery is low. Voltage going into vcm2 is steady 13.9v as I always use my Schumacher battery charger while programming.

The problem is inside the vcm2. Either the processor doesn't see voltage or sees a lower voltage than what comes in.

Anyone has some sort of electrical schematic of those sp177c so i could try to repair it ??

Thanks

 

 

Possible solution:

 

If you have new ids then car's battery needs to be like 14v.!

Get into runtime folder and edit file "batterymonitor"

Something like this::::

BatteryMonitor

[BatteryLevels]

MaxLowVoltage = 11600

MinMediumVoltage = 11500

MaxMediumVoltage = 12000

MinHighVoltag = 12800

Then try again.!

 

Source:http://www.obdexpress.co.uk/service/how-to-solve-vcmii-ca...

11:20 Publié dans car diagnosis tool | Tags : vcm 2 | Lien permanent | Commentaires (0)