topblog Ivoire blogs


Renault CLIP V179 Test Report: Failed! Use CLIP V178!

After tested,sorry to tell you all with Renault CANCLIP interface that


Please back to use CANCLIP V178 for Renault diagnostic test!


Review 1: not connected

I have an issue wile connecting to the clip: v178 works fine. Screenshot attached.

did not find a way to somehow blacklist CLIP clones.

CLIP clones.


Review 2: blacklisted

Sad but true, it seems Bosch has blacklisted CAN-CLiP china clones for v179, sorry for the resulted disadvantages


Review 3: no luck on cars

Today i have tried to connect three renault cars:

Renault Kangoo - 2001

Renault Kangoo - 2010

Renault Laguna - 2004

but no joy.

Sonde is recognized OK but then no luck.


Review 4: back to canclip 178

Installed back version 178 off and everything is OK.I hope somebody find the solution for the problem.


Review 5: RLT2002 probe problem

The same problem. RLT2002 probe.

China's serial blacklisted.Wait for v180 and see if it's a bug or by design. In the meantime use version 178.


Review 6: new VCI works

this is old sonde clip probe error.

new VCI working good.

Here i mean Renault Alliance VI. Its maybe better known as Nissan Consult 3. Do not make confusion with Nissan Consult3+ (Alliance VI2)

Anyway I don't belive its a blacklist for RLT2002 proble. I am very sure that its a bug of this CAN CLIP software version.

Lets wait newer update version and see then

Good luck




VVDI MB programs W221 remote NEC key v51

Look here: managed to program NEC key v52 from W221 using VVDI MB TOOL


How-to’s with images:



Key file: v51


Writing data


Load key file


Read and write key

Mode: IR

Type: NEC key (original)

Identification key






Read data successfully

Mode: NEC adapter

Type: v03, c06, c08 keyless go

Identification key


Prepare key file




Write data successfully

Mode: OBD

Chassis: w221

Read EIS data


You’ve better write VIN before writing EIS data




Write VIN successfully

Write EIS data



Read EIS data


Read EIS data successfully

EIS is normal

NOT activated


Load original EIS data



Save EIS data


Write VIN




Read EIS data




VVDI MB TOOL Tech Support from





NO MPPS V21! Buy MPPS V18 Instead

This is for those looking for a cheap MPPS V21 cable from China.

FYI, you are NOT advised to have MPPS V21 China clone!


If you have MPPS V21 clone, your interface might be locked.

Look here: MPPS V21 = Failure


V21 Was released AS A TIME BOMB for clones LOL.

Any V21 software will kill any clone after 10 writes. 


Dead interface. CAUTION DO NOT USE V21 on v18


100% Interface Danger, Dead usb.
I used v18 for several months, lots of cars.
V21 killed interface.


my mpps v21 arrived only worked few day now locked

PC not detect anymore


It has the same kind of timebomb built in. If you need v21 you need to reflash it, end of story. Also people don't buy mpps to make boot mode for every write, if that's what your intentions are that's just foolish.


Please buy a MPPS V18 interface instead, if you need a MPPS cable.



Look at MPPS V18 reviews: Have MPPS V18 = Have relief.


MPPS V18 clone Ford:

Ford Fusion Style 1.6 TDCi Bosch EDC16C34-2
Software Number 1 : 1037377399
Software Number 2 : 1037377399
Ford Hawdware Number : 9653239880
Ford Software Number : 5255A56D10
Ecu Type : BOSCH EDC16C34/2.2
R/W OBD/CAN = OK .... after write not error OBD scaner.


Ford – SID206 R/W OBD ok


Ford edc16c34 2.20 r/w ok
yesterday i have tested mpps v18 into myFord Focus 2 edc16c34.
read about 10 min and write 3-4 min


Focus, read 3 sectors about 10 min and write 4,20 min than wait 3 min.
after that 3 min i wait another 2 min, like software says.


MPPS is renown for Issues on the Focus 1.6tdci Edc16 ecu,

so much so i never ever tried, always same story mpps.
Always used Fgtech on these, and no issues,

i would BDM or use any tool other than MPPS whatever version


i come back with news about edc16c34 Ford

the news is this is a good tool.

mpps did not corrupt my eep, file that i was made it was bad, in my happines and stupidity i put into IQ maps, 65mg fuel without changing IQ limit, 60mg

i have write that file with galletto and same problem.

today i have write another file (good one) with mpps v18 and it was verry good.

ford edc16c34 2.20 r/w ok

i can’t wait to see if can do edc16c34 5.95


MPPS V18 VAG (audi, vw, skoda, seat):

Ecu Selection = Volkswagen Passat 2.0 TDI Siemens PPD 1.X 
Bosch Hardware Number: 03G906018CD
Vw Software Number: 03G906018CD
System Type Number: R4 2.0l PPD1.5 G


VW PCR 2.1 work v18 clone no problem

read and write on bench


Golf 1.6 TDI Siemens Simos Pcr2.1

R/W can (unlock boot mode-ok) – ok


easy A4 2.5L edc15v

obd mode

read and write
kess didnt want to read this tho ? might of been voltage l read at the guys place(fans on with read and write) and wrote at mine with charger but didnt try kess again


Golf TDI EDC17c14

Boot mode.
read / write all ok,


Skoda Fabia 1.9SDI EDC15V+ ….

generic eeprom OBD K-line R/W-OK
Flash OBD K-line R/W-OK


Skoda Octavia 2.0 Tdi edc16

all good


Vw Caravelle 1998 msa 15.5

same I’d okay but not read


ECU EDC17 on Audi a6 2009

this tool read via boot


Polo SIMOS 3PE 1.2 12v

read/write as generic simens SIM4LE boot mode flash 512kB – OK  (catalyst off).


Chinese MPPS V18 Opel:

Opel cdti 1.7 ecu Denso R/W ok


Opel – EDC16C9/39PSG16 via CAN OBD read and write ok


Opel – EDC16C9/39,PSG16CAN read write OK


Opel Corsa marelli 1.3cdti OK

(Be sure to run as administrator using windows 7)


Opel Astra H 1.7CDTI 125PS (98002895 Z17DTR DENSO)

Read and write via OBD (CAN) OK


MJD 6JF Fiat/Opel micro+ eeprom

R/W OBD – K line (MPC555+95320) OK


Opel Signum PSG16 2.2CDTI

read as a Zafira by OBD all OK


Opel Astra 2.0 16V CDTI BOSCH PSG16It

auto checksum and read/write OK


Opel 602/3 full read/write Micro, Flash, EEPROM, via k-line & CAN ok

Opel 603 full R/W Micro, Flash, EEPROM, via k-line & CAN ok

Opel 6JO full read/write Micro & EEPROM, OK via k-line (CAN)