topblog Ivoire blogs

27/07/2018

Remote Maker Review: KD900 and KD900+

Have collected user experience of KD900 and KD900+ remote makers:

 

KD900 vs KD200:

COMPARE WITH kd200 ,

KD900 CAN CHECK THE frequency of remotes

can copy the rolling code and fixed code remote of garage.

can support smart match for remotes, in other words if come a car

and you do not know wut remotes to choose, just use smart match it will pop out the correct remotes.

 

KD900+ vs KD900:

KD900+'s has new features:

the possibility to clone most fixed coded garage, home alarm and car alarm remotes.

and it’s pwered by 4*AA batteries with a battery life indicator on the main screen

 

KD900 review:

 

  1. good:

KD900 is a good tool to have, but don't forget it's able to generate remotes ready for programming, it's not a key programmer, you will need several key programmers as well to offer a good service.

 

  1. great with a key programmer for Ford:

I have the KD900, and it is a great piece of kit. But once you have created the remote, unless you are doing a ford remote, you'll need a diagnostics programmer. I use a Keyscan and an old Advance Diagnostics AD100 which could do with a bit more software on it to be honest.

 

  1. great for Mazda:

quite a few have manual remote procedures , plenty of vag , some honda, some jag etc , but the ones that made the most for me over the years on manual procedure are mazda , great for mazda. theres alot more than ford that have manual processes .

 

  1. PSA 46 chip works:

the nb psa with integrated 46 chip have saved me a fortune and stronger than oem remotes , these you do need diag for chip but manual process on remote .

 

  1. KD900+ works great:

I've kd900+ and also works great, but you need good battery in smartphone - during "online" generating eat power like crazy. If you want buy better look for local dealers than aliexpress - on trade locks they sell it for about 100pounds. If you don't need extra function like frequency meter or garage remotes cloning you can also look for kd mini - i've also got one and it works.

 

  1. Subaru legacy 2008:

Subaru legacy 2008 worked a treat using Suburu 02 and cutting it on hu83!

 

  1. 2001 estate, 2002 hatch and 2003 estate:

Programmed 3 astra remotes in the last 2 weeks. 2001 estate, 2002 hatch and 2003 estate with alarm. All OK

Don't know what kind of remote programmed but the 03 with alarm was online. Probably Delphi

 

  1. Civic 2009-2013:

i use civic 2009-2013 and worked ok

 

 

  1. sharan with 7m3:

I made today one sharan with 7m3. Only problem was that I have to repeat procedure 2 or 3 times. Where was problem i don't know - maybe in time between clicks or pushing time.

 

  1. 2012 Skoda 5th immo:

I programmed year 2012 with 5 generation skoda.

Also worked the vw ..202ad

 

  1. 7M3:

Today tried to make 7M3, generated like 5 -6 pieces, generate success, but none of them accept by the car :/

 

  1. Mini Cooper:

There are two remotes for Mini Cooper listed in KD Mobile app, 315MHz and 433 MHz.

 

  1. Civic:

I used kd-x2 to clone the civic

I clone it on nb multifunction, that’s why I was thinking that the remote will be cloned as well.

 

  1. Toyota Aygo 2007:

Toyota Aygo 2007 remote works ok with KD900

KD900-remote-maker-toyota

 

Tech support from obdexpress.co.uk:

use the manual procedure for the remote with KD900 remote maker:

programmed key in the ignition and switch ignition on

lock door with 2nd key manually

press unlock button once

wait 5 seconds then press unlock button once again

now open door manually , switch ignition off and remove key and test the remote functions.

 

if programming 2 remotes , when you do second one follow same procedure but press unlock twice each time instead of once

 

also make sure you are using the correct remote , on that year it may be 1J0 959753N but could also be 1J0 959753 DA or AH , and can also be 1J0 959753 CT or AG

Src:

26/07/2018

How to connect XENTRY Connect C5 for Mercedes diagnosis

How to connect CLONE XENTRY Connect C5 step-by-step guide here:

 

 

C5 China clone

xentry-connect-c5-how-to-connect-1

source: http://www.obdexpress.co.uk/wholesale/mb-star-c5-xentry-s...

It’s the standby mode when SD Connect C5 is not connected to a car

C5 will go to the standby mode only when connected to the power

xentry-connect-c5-how-to-connect-2

Two USB ports and another  port for power supply on the side of C5 mux

(charged with the power cable for Panasonic tab)

xentry-connect-c5-how-to-connect-3

C5 wlan cable and tab power cable are connected to the ports on the right of the Panasonic tab

xentry-connect-c5-how-to-connect-2 xentry-connect-c5-how-to-connect-4

 

Turn on and  off for 3 seconds and the tab will start

xentry-connect-c5-how-to-connect-6

Connect the OBD cable, power cable and wlan cable to C5 mux in a good condition

xentry-connect-c5-how-to-connect-7

Wait for another 2 minutes....C5 will start and display info as below

xentry-connect-c5-how-to-connect-8

“No car connected” will pop up coz there is no car connected to C5

xentry-connect-c5-how-to-connect-9

This is the tab connected to C5

xentry-connect-c5-how-to-connect-9

Run Xentry Connect

xentry-connect-c5-how-to-connect-11

Wait for connection to C5

xentry-connect-c5-how-to-connect-12

Connect successfully to C5

xentry-connect-c5-how-to-connect-13

Click on the green icon

xentry-connect-c5-how-to-connect-14

Login Xentry Diagnosis to have Mercedes diagnostic or programming with Xentry Connect

xentry-connect-c5-how-to-connect-15

The newest Xentry XDOS is version 07.2018: http://www.obdexpress.co.uk/wholesale/2018-07-mb-sd-benz-c4-c5-software-ssd.html

 

 

How to connect XENTRY Connect C5 for Mercedes diagnosis

How to connect CLONE XENTRY Connect C5 step-by-step guide here:

 

 

C5 China clone

xentry-connect-c5-how-to-connect-1

source: http://www.obdexpress.co.uk/wholesale/mb-star-c5-xentry-s...

It’s the standby mode when SD Connect C5 is not connected to a car

C5 will go to the standby mode only when connected to the power

xentry-connect-c5-how-to-connect-2

Two USB ports and another  port for power supply on the side of C5 mux

(charged with the power cable for Panasonic tab)

xentry-connect-c5-how-to-connect-3

C5 wlan cable and tab power cable are connected to the ports on the right of the Panasonic tab

xentry-connect-c5-how-to-connect-2 xentry-connect-c5-how-to-connect-4

 

Turn on and  off for 3 seconds and the tab will start

xentry-connect-c5-how-to-connect-6

Connect the OBD cable, power cable and wlan cable to C5 mux in a good condition

xentry-connect-c5-how-to-connect-7

Wait for another 2 minutes....C5 will start and display info as below

xentry-connect-c5-how-to-connect-8

“No car connected” will pop up coz there is no car connected to C5

xentry-connect-c5-how-to-connect-9

This is the tab connected to C5

xentry-connect-c5-how-to-connect-9

Run Xentry Connect

xentry-connect-c5-how-to-connect-11

Wait for connection to C5

xentry-connect-c5-how-to-connect-12

Connect successfully to C5

xentry-connect-c5-how-to-connect-13

Click on the green icon

xentry-connect-c5-how-to-connect-14

Login Xentry Diagnosis to have Mercedes diagnostic or programming with Xentry Connect

xentry-connect-c5-how-to-connect-15

The newest Xentry XDOS is version 07.2018: http://www.obdexpress.co.uk/wholesale/2018-07-mb-sd-benz-c4-c5-software-ssd.html