topblog Ivoire blogs

13/11/2017

How to program VW Polo 2009 4th IMMO NEC+24C32 Key with Lonsdor K518ise via OBD

This steps guide of  how to use  Lonsdor K518 key programmer program VW Polo 2009 4th IMMO NEC+24C32 Key via OBD.

Key information:

Original key: 3-button folding remote key

Frequency: 433MHz

Chip type: Special ID48 chip (TP23)

Device to program: Lonsdor K518ISE key programmer

 

 

Procedure:

 

Connect K518 host with vehicle via OBD diagnostic socket

Select Immobilizer->VAG->4th Immobilizer->Identify Immo type

 

lonsdor-k518-vw-polo-4

Lonsdor K518 identified immo type: 4th IMMO

 

lonsdor-k518-vw-polo-5

 

K518 detect vehicle part number and immo type

lonsdor-k518-vw-polo-5

 

Select NEC 24C32

lonsdor-k518-vw-polo-7

 

Then Backup EEPROM and save data

lonsdor-k518-vw-polo-8

 

 

Select Read Immobilizer data

lonsdor-k518-vw-polo-9

 

Lonsdor K518ISE read vehicle information: VIN, CS, PIN, key number and key ID

lonsdor-k518-vw-polo-10

 

Select Make Dealer Key

lonsdor-k518-vw-polo-11

 

Push card slot on K518 main unit from right direction

Insert new key to be programmed into card slot

lonsdor-k518-vw-polo-12

 

lonsdor-k518-vw-polo-13

 

Select Key Learn

lonsdor-k518-vw-polo-14

 

Enter key number to be programmed (keys that will start vehicle )

lonsdor-k518-vw-polo-15

 

Insert key and turn ignition on one by one

I.E, Dashboard shows 1-2 means 1 key has been learnt, 2-2 means 2 keys have done

lonsdor-k518-vw-polo-16

 

Program success.

lonsdor-k518-vw-polo-17

 

Test remote and star car

 

 
 
 

SOURCE:

https://lonsdor-k518ise-served.blogspot.com/

09/11/2017

What’s the difference between Orange 5 genuine and copy version

Orange 5 Programmer Original VS clone,Let’s check the PCB, adapters, capabilities, and reviews here.

 

Price:

Orange5 original price: US$1,299

Orange 5 clone price: US$179

 

Outlook:

Left: Original

Right: Clone

Orange5 original vs clone

 

Package:

OEM Orange 5 (clone) : Blue board and adapters

Original Orange5: Green board and adapters

Clone comes with software CD cause software is not able to download and update

Original does not with CD, you can download it on official website scorpio-lk.com.

Orange5 original comes with more adapters

 

original-orange5-2

 

original-orange5-3

PCB layouts:

 

original-orange5-4

 

original-orange5-5

So, what’s the difference when using Orange 5 genuine and copy version? Read the reviews here. Customers talk the truth.

 

Genuine Orange 5 review:

Orange 5 Original vs Clone:

Do not get confused by Orange pricing. Orange charge separately for the device, the immo software, the airbag software and the radio software, plus a few specials.

All this comes with the clone.

To compare the two, you must add up all the costs from Orange. There is a very large saving if you buy the clone. But you cannot update it and you have no support from Scorpio. It will suit some people for sure. The adapters are poor quality, and for many the hardware does not work. No doubt as time goes by will will see huge threads about how to fix them. The company who makes it does not have a good reputation for quality or support.

 

I do not regret buying original Orange5 and Tango key programmer. But when I did there were no clones available as an alternative.

 

As for the Tango clone, it’s PCB and components are nothing like the original, and of a very poor quality. I have not seen inside an Orange5 clone yet.

 

Clone Orange5 reviews/test report:

1)

I buy Orange5 china clone. Work great. Now i check in hc05b8, hc11e9, end eproms. All read and write very fast.

I have never had any problems with clone, everything works as it should, knock on wood.

I don’t know is there any scripts but softwares for immo,radio and dash coming together with clone.

 

2)

On Hc908az60 secured it work’s good.

I have 4 secured mcu, and they work ok.

I have tried 68hc11, allot of eproms, and it work’s just perfect.

I don’t have right now anithing else.

Clone but includes – Immo HPX 9V0

confirmed that oem orange 5 comes with immo hpx 9.0 and adapter set

 

3)

I have clone and work perfect.

2j74y ok

35080 ok

Tms immo opel ok

Hc05 immo old vw ok

 

4)

I have Orange 5 clone and everything works perfect for now.

I tested with 1J35D,4J74Y,1D69J,0D69J,0F82B,3K91D,TMS370c702

 

5)

OEM clone seem work good after report from some users. Just need rework solder points on Moto adapter.

I am not aware of a clone Orange 5 yet. But if it says not updatable then it must be a clone. Original ones are sold by Chinese sellers as well. Prices can vary depending on the bundled software.

 

6)

i have this Orange5 clone and work everytime with him. not work car radio option.i think isn’t bad clone and not expansive.

 

7)

I have just bought orange 5 programmer and all seems to work well happy

I got fed up with my genuine upa usbs programmer which didn’t seem to want to read anything, it went through the motions and said success reading a load of zeros gavel

Straight out of the box this Orange 5 clone read and write eproms 95640 and 95P08C3 in circuit no problem with no errors, but I had to make sure that my connections to the chip via test clip were all good and then tool work like charm nerd

I think I like it so far.

 

8)

I have it for a long time and for now everything is working properly.

One of the few clones that works well and works as an original.

So far its reading and writing (with verify) all eeproms i try. Good tool so far.

Some adapters are not supplied and must be purchased separately Adapters should be resolder for sure but it isn’t so bad ,at all

The main point orange 5 clone isn’t so bad as clones can be.

Good investment for sure .

9)

I like PIN checking function (test insertions) very much .It saved my job a lot of time.

In combination with my UPA -S,CarProg,and mini pro TL866 a lot of job can be done successfully .

Great programmer. All that is stated works. If the speed of exchange is not important, you can do a lot. Many good calculators.

 

 

You make your choice.

What’s the difference between Orange 5 genuine and copy version

Orange 5 Programmer Original VS clone,Let’s check the PCB, adapters, capabilities, and reviews here.

 

Price:

Orange5 original price: US$1,299

Orange 5 clone price: US$179

 

Outlook:

Left: Original

Right: Clone

Orange5 original vs clone

 

Package:

OEM Orange 5 (clone) : Blue board and adapters

Original Orange5: Green board and adapters

Clone comes with software CD cause software is not able to download and update

Original does not with CD, you can download it on official website scorpio-lk.com.

Orange5 original comes with more adapters

 

original-orange5-2

 

original-orange5-3

PCB layouts:

 

original-orange5-4

 

original-orange5-5

So, what’s the difference when using Orange 5 genuine and copy version? Read the reviews here. Customers talk the truth.

 

Genuine Orange 5 review:

Orange 5 Original vs Clone:

Do not get confused by Orange pricing. Orange charge separately for the device, the immo software, the airbag software and the radio software, plus a few specials.

All this comes with the clone.

To compare the two, you must add up all the costs from Orange. There is a very large saving if you buy the clone. But you cannot update it and you have no support from Scorpio. It will suit some people for sure. The adapters are poor quality, and for many the hardware does not work. No doubt as time goes by will will see huge threads about how to fix them. The company who makes it does not have a good reputation for quality or support.

 

I do not regret buying original Orange5 and Tango key programmer. But when I did there were no clones available as an alternative.

 

As for the Tango clone, it’s PCB and components are nothing like the original, and of a very poor quality. I have not seen inside an Orange5 clone yet.

 

Clone Orange5 reviews/test report:

1)

I buy Orange5 china clone. Work great. Now i check in hc05b8, hc11e9, end eproms. All read and write very fast.

I have never had any problems with clone, everything works as it should, knock on wood.

I don’t know is there any scripts but softwares for immo,radio and dash coming together with clone.

 

2)

On Hc908az60 secured it work’s good.

I have 4 secured mcu, and they work ok.

I have tried 68hc11, allot of eproms, and it work’s just perfect.

I don’t have right now anithing else.

Clone but includes – Immo HPX 9V0

confirmed that oem orange 5 comes with immo hpx 9.0 and adapter set

 

3)

I have clone and work perfect.

2j74y ok

35080 ok

Tms immo opel ok

Hc05 immo old vw ok

 

4)

I have Orange 5 clone and everything works perfect for now.

I tested with 1J35D,4J74Y,1D69J,0D69J,0F82B,3K91D,TMS370c702

 

5)

OEM clone seem work good after report from some users. Just need rework solder points on Moto adapter.

I am not aware of a clone Orange 5 yet. But if it says not updatable then it must be a clone. Original ones are sold by Chinese sellers as well. Prices can vary depending on the bundled software.

 

6)

i have this Orange5 clone and work everytime with him. not work car radio option.i think isn’t bad clone and not expansive.

 

7)

I have just bought orange 5 programmer and all seems to work well happy

I got fed up with my genuine upa usbs programmer which didn’t seem to want to read anything, it went through the motions and said success reading a load of zeros gavel

Straight out of the box this Orange 5 clone read and write eproms 95640 and 95P08C3 in circuit no problem with no errors, but I had to make sure that my connections to the chip via test clip were all good and then tool work like charm nerd

I think I like it so far.

 

8)

I have it for a long time and for now everything is working properly.

One of the few clones that works well and works as an original.

So far its reading and writing (with verify) all eeproms i try. Good tool so far.

Some adapters are not supplied and must be purchased separately Adapters should be resolder for sure but it isn’t so bad ,at all

The main point orange 5 clone isn’t so bad as clones can be.

Good investment for sure .

9)

I like PIN checking function (test insertions) very much .It saved my job a lot of time.

In combination with my UPA -S,CarProg,and mini pro TL866 a lot of job can be done successfully .

Great programmer. All that is stated works. If the speed of exchange is not important, you can do a lot. Many good calculators.

 

 

You make your choice.