topblog Ivoire blogs

19/10/2019

Tacho Pro 2008 Odometer Mileage For Audi A4-Bosch 2002

Purpose:Audi A4 milege adjustment

Tool option:Tacho Pro 2008

Here you are:

Situation 1: Audi A4 Bosch crypted since 9/2001 soldering

use this board and sw 13 cable

tacho-pro-2008-audi-a4-1 tacho-pro-2008-audi-a4-2 tacho-pro-2008-audi-a4-3

Audi A4 Bosch crypted
write down exactly the old kilometers
• remove the cluster and open it
• solder the cables like in the picture
• connect the cable to port 3
• select the program Audi-A4-Motometer Bosch 9/01
• the Tacho Universal shows you „ 0 km“
• select „save“
• select „adjust km“
• enter the new value and press OK
• enter the old value and press OK
• the Tacho Universal now shows you the value that will be displayed in
the cluster
• if this value is too high or low, load the saved data and repeat the
procedure with an other new value

tacho-pro-2008-audi-a4-4

 

Situation 2:Model Audi A4 Bosch crypted since 09/01 clip 

use this board and sw 13 clip

tacho-pro-2008-audi-a4-5
write down exactly the old kilometers
• remove the cluster and open it

tacho-pro-2008-audi-a4-6 tacho-pro-2008-audi-a4-7 tacho-pro-2008-audi-a4-8

pull off the speedo and rev needles
• look for the 8-pin eeprom 24c08
• connect the clip to port 3
• select the program Audi-A4-Motometer Bosch 9/01
• the Tacho Universal shows you „ 0 km“
• select „save“
• select „adjust km“
• enter the new value and press OK
• enter the old value and press OK
• the Tacho Universal now shows you the value that will be displayed in
the cluster
if this value is too high or low, load the saved data and repeat the procedure
with an other new value

Source:http://www.mileageprogrammer.com/tacho-pro-2008-change-od...

Les commentaires sont fermés.