topblog Ivoire blogs

30/07/2019

How to read Kia kefico m7.9.8 with trastata, Ktag and FGTech?

Have Kia kefico m7.9.8 to read the ECU pinout boot mode or BDM, need Ktag, FGTech, transdata.This article is available with how to read FGTECH and how to read with transdata and Ktag etc.

 

read-kia-kefico-m7.9.8-00

 

  1. Read Kia kefico m7.9.8 with FGTech, here is a tutorial

http://blog.obdexpress.co.uk/2017/08/08/fgtech-galletto-v...

 

  1. Read Kia kefico m7.9.8 with transdata and Ktag, here is a tutorial.

 

BOSCH_M798_KIA

The LAY by pins are located on the lower part of the ECU

PLUGIN 167

read-kia-kefico-m7.9.8-01

 

Connect the power (+12v) only for DIRECT CONNECTION,

do not connect power (+12V) with DIMA CONNECTION

read-kia-kefico-m7.9.8-02

DIRECT CONNECTION

Connect the universal wiring to POL4 & POL5 and to the ECU connector as shown in the pictures.

read-kia-kefico-m7.9.8-03

 

DIMA CONNECTION

Connect the blue wire to POL5 and to DIMA adapter as shown in the picture.

read-kia-kefico-m7.9.8-04 read-kia-kefico-m7.9.8-05

 

I would advise using pencil, it is always faster, comfortable and clean to work.

read-kia-kefico-m7.9.8-06

 

From http://www.obdexpress.co.uk/wholesale/bdm-frame-cmd-bdm10...

 

 

http://blog.obdexpress.co.uk/2019/07/30/how-to-read-kia-k...

08:49 Publié dans Car ECU programmer | Tags : ktag | Lien permanent | Commentaires (0)

Les commentaires sont fermés.