topblog Ivoire blogs

03/11/2018

How to use Mini ACDP for 2010-2018 Porsche BCM

Tested successfully! Yanhua Mini ACDP is able to make new keys to Porsche 2010-2018.   Tool: Yanhua Mini ACDP + Module 10 mini-acdp-porsche-add-new-key Time: around 8 minutes Video demo: Step-by-step instruction:   Run Mini ACDP Porsche software mini-acdp-porsche-add-new-key-6 ACDP starts to add new keys to Porsche... Add new key for new Porsche - ICP IMMO - MC9S12XEP100 (Mask 1N35H) - Add key (auto mode) mini-acdp-porsche-add-new-key- mini-acdp-porsche-add-new-key-10 Note: - Pls prepare OBP+ICP adapter, BCM interface board, BCM module, BAV adapter and blank key - It is forbidden to cut ACDP power off during the process of adding a key - Pls store the original and programmed EEPROM/DFLASH data as prompts. mini-acdp-porsche-add-new-key-11 Note: - Pls connect ACDP device, OBP+ICP adapter, BCM interface board, BCM module - Check the crystal oscillator package of BCM module: EXT1 short - circuited for ceramic packaged crystal oscillator, EXT2 short-circuited for metal packaged crystal oscillator - Save the chip data read by the BCM module according to the software tips mini-acdp-porsche-add-new-key-12 mini-acdp-porsche-add-new-key- mini-acdp-porsche-add-new-key-3 mini-acdp-porsche-add-new-key-5 Pin detection status: When EXT contact is bad, check the EXT1 pin if the crystal oscillator is ceramic packaged or EXT2 pin if it’s metal packaged mini-acdp-porsche-add-new-key-13 It’s detected that the BCM module chip has been encrypted. Continue mini-acdp-porsche-add-new-key-14 Read PFLASH, EEPROM/DFLASH data and save data mini-acdp-porsche-add-new-key-18 mini-acdp-porsche-add-new-key- mini-acdp-porsche-add-new-key-20 mini-acdp-porsche-add-new-key-21 mini-acdp-porsche-add-new-key-22 Immo information: Pls make sure the info is correct mini-acdp-porsche-add-new-key-23 Note: - Keep the ACDP device power on Disconnect the OBP+ICP adapter and ACDP device firstly. (Keep the OBD+ICP adapter, BCM interface board and BCM module connected) - Connect the ACDP device to the BAV-KEY adapter and put the key correctly in the BAV-KEY adapter mini-acdp-porsche-add-new-key-25 ACDP read out the current key ID mini-acdp-porsche-add-new-key-26 Select a number for adding a key (the gray number is not optional, that mean this key number is already used or current key is already exit) mini-acdp-porsche-add-new-key-27 Mini ACDP is rogramming key... mini-acdp-porsche-add-new-key-28 Store DFLASH data mini-acdp-porsche-add-new-key-30 Note: - Keep the ACDP device power on Disconnect the OBP+ICP adapter and ACDP device firstly. - Connect the ACDP device, OBD+ICP adapter, BCM interface board and BCM module - Check the crystal oscillator package of BCM module: EXT1 short - circuited for ceramic packaged crystal oscillator, EXT2 short-circuited for metal packaged crystal oscillator mini-acdp-porsche-add-new-key- mini-acdp-porsche-add-new-key-32 Pin detection status mini-acdp-porsche-add-new-key-33 It’s detected that the BCM module chip has been encrypted mini-acdp-porsche-add-new-key-34 Check the key information mini-acdp-porsche-add-new-key- mini-acdp-porsche-add-new-key-37 Adding key completed Pls install the BCM module back to the vehicle to confirm that the new key can be used normalyy mini-acdp-porsche-add-new-key-39 Success        

Les commentaires sont fermés.