topblog Ivoire blogs

03/09/2018

How to solve VCM 2 SP177C cannot read voltage on obd pin 16

VCM 2 SP177-C voltage issue:

 

I have one of my VCM 2 SP177C that doesn't read voltage on obd pin 16.

It does power up, but when trying to program, I get a message saying vehicle battery is low. Voltage going into vcm2 is steady 13.9v as I always use my Schumacher battery charger while programming.

The problem is inside the vcm2. Either the processor doesn't see voltage or sees a lower voltage than what comes in.

Anyone has some sort of electrical schematic of those sp177c so i could try to repair it ??

Thanks

 

 

Possible solution:

 

If you have new ids then car's battery needs to be like 14v.!

Get into runtime folder and edit file "batterymonitor"

Something like this::::

BatteryMonitor

[BatteryLevels]

MaxLowVoltage = 11600

MinMediumVoltage = 11500

MaxMediumVoltage = 12000

MinHighVoltag = 12800

Then try again.!

 

Source:http://www.obdexpress.co.uk/service/how-to-solve-vcmii-ca...

11:20 Publié dans car diagnosis tool | Tags : vcm 2 | Lien permanent | Commentaires (0)

Les commentaires sont fermés.