topblog Ivoire blogs

26/07/2018

How to connect XENTRY Connect C5 for Mercedes diagnosis

How to connect CLONE XENTRY Connect C5 step-by-step guide here:

 

 

C5 China clone

xentry-connect-c5-how-to-connect-1

source: http://www.obdexpress.co.uk/wholesale/mb-star-c5-xentry-s...

It’s the standby mode when SD Connect C5 is not connected to a car

C5 will go to the standby mode only when connected to the power

xentry-connect-c5-how-to-connect-2

Two USB ports and another  port for power supply on the side of C5 mux

(charged with the power cable for Panasonic tab)

xentry-connect-c5-how-to-connect-3

C5 wlan cable and tab power cable are connected to the ports on the right of the Panasonic tab

xentry-connect-c5-how-to-connect-2 xentry-connect-c5-how-to-connect-4

 

Turn on and  off for 3 seconds and the tab will start

xentry-connect-c5-how-to-connect-6

Connect the OBD cable, power cable and wlan cable to C5 mux in a good condition

xentry-connect-c5-how-to-connect-7

Wait for another 2 minutes....C5 will start and display info as below

xentry-connect-c5-how-to-connect-8

“No car connected” will pop up coz there is no car connected to C5

xentry-connect-c5-how-to-connect-9

This is the tab connected to C5

xentry-connect-c5-how-to-connect-9

Run Xentry Connect

xentry-connect-c5-how-to-connect-11

Wait for connection to C5

xentry-connect-c5-how-to-connect-12

Connect successfully to C5

xentry-connect-c5-how-to-connect-13

Click on the green icon

xentry-connect-c5-how-to-connect-14

Login Xentry Diagnosis to have Mercedes diagnostic or programming with Xentry Connect

xentry-connect-c5-how-to-connect-15

The newest Xentry XDOS is version 07.2018: http://www.obdexpress.co.uk/wholesale/2018-07-mb-sd-benz-c4-c5-software-ssd.html

 

 

Les commentaires sont fermés.