topblog Ivoire blogs

23/05/2018

Abarth 124 Marelli 8GMK read/write with KSuite 2.33 download

Free download KESS V2 KSuite 2.33 with protocol 576 for Abarth 124 r/w:
https://mega.nz/#!kspDBQBD!64ybgw57IriCYTQ_5WtUcqlsGMb2oK...

Tested working with Kess v2 china clone:

Kess V2 Firmware V4.036

Kess V2 Firmware V3.099

Kess V2 Firmware V4.024 Truck Version

Kess V2 Firmware V4.0363 Truck Version

Kess V2 Firmware V5.017

 

Kess V2 Ksuite 2.33 and new Abarth 124:

The most interesting novelty for KESSv2 programmer is protocol 576 for Magneti Marelli 8GMK Microcontroller SPC564A80 ECUS equipped on new Abarth: from today you can work on these vehicles via OBDII, so that you won’t need to remove and open the ECU anymore!

 

KSuite 2.33 and FAL Magneti Marelli 8GMK Micro SPC564A80 CAN:

KESS v2 – 576

– Read: YES

– Write: YES

– Checksum Correction: YES

– Cable: 1144300KCAN

Model

Model Name

Engine

Engine Code

KW

HP

Fuel

MY

ECU

ECU Version

Abarth

124 Spider

1.4 16v MultiAir Turbo 6AT

55253268

125

168

Petrol

2016

Magneti Marelli

8GMK

Abarth

124 Spider

1.4 16v MultiAir Turbo 6MT

55253268

125

168

Petrol

2016

Magneti Marelli

8GMK

Abarth

595 Competizione

1.4 16v MultiAir Turbo 5MT

 

132

177

Petrol

2016

Magneti Marelli

8GMK

 

Kess V2 Ksuite 2.33 Working Perfect with new Abarth 124:

 

 

 

 

 

08:28 Publié dans Car ECU programmer | Tags : kess v2 | Lien permanent | Commentaires (0)

22/05/2018

Digiprog 3 Smart ForTwo 2007 (BOX/TACHO) Odometer Correction

This tutorial is about how to use Digiprog III clone to do odometer mileage correction of Smart ForTwo 2007  BOX and Smart ForTwo 2007 TACHO

 

Part 1: Smart ForTwo 2007 BOX

 

Requires plug 48:

ST 48

yellow       18     yellow

green        17     green

white        7       white

brown       13     brown

digiprog-3-smart-fortwo-2007-box-3

 

SMART Model 2007 BOX

digiprog-3-smart-fortwo-2007-box-1

 

!!! ALWAYS FOLLOW THE BATTERY !!!

Remove box and disassemble.

digiprog-3-smart-fortwo-2007-box-2

 

Position of the box: driver footwell left above the steering column.

digiprog-3-smart-fortwo-2007-box-4

Connect the plug 48 with the marked solder points

digiprog-3-smart-fortwo-2007-box-3

digiprog-3-smart-fortwo-2007-box-5

Attention the big fuses have to be pulled to open the box; Remember slots.

Select the program: car / truck - SMART - FORTWO - BOX.

digiprog-3-smart-fortwo-1 digiprog-3-smart-fortwo-2

The DIGIPROG 3 indicates the old / wrong KM level.

Program the new / correct KM booth and you're done.

The speedometer must gem.

 

Part 2: Smart ForTwo 2007 TACHO

Requires plug 01:

ST 1           clip 3M 923650-08

1                1

2                2

3                3

4                4

19              5

6                6

5                7

7                8

digiprog-3-smart-fortwo-2007-tacho-2

SMART FORTWO 95C640

!!! ALWAYS FOLLOW THE BATTERY !!!

Remove and disassemble the speedometer.

digiprog-3-smart-fortwo-2007-tacho-1 digiprog-3-smart-fortwo-2007-tacho-3

Carefully peel off the pointer.

Locate the chip 95C640

digiprog-3-smart-fortwo-2007-tacho-4

The designation can also be 25LC640.

ATTENTION: you have to unsolder this chip.

First, always make a backup of the chip via the EEPROMM program.

Select the program: CAR / TRUCK - SMART FORTWO - CHIP 95C640.

The DIGI PROG displays the old / wrong KM level.

Program the new / correct KM booth and you're done.

The box must gem.

 

Tech support from 

 

http://digiprog3-obd2expresscouk.blogspot.com/2018/05/dig...

21/05/2018

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006

Can use ktag ecu programmer to work on ME 9.7 Mercedes S350 2006? How to do ?

 

Here we go:

Test: Ktag on ME 9.7 Mercedes S350 2006

Tool: Ktag programming tool China clone

Car: Mercedes S350 (W211) 2006

ECU: Bosch ME 9.7

 

Procedure:

Select a model in KTag software

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 1

 

IMPORTANT: make a backup copy of the ECU

Connect the ECU to the Ktag programmer

Pin 2 = GND

Pin 15, 16 = +12V

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 2

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 3

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 4

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 5

 

 KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 6

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 7

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 8

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 9

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 10

 

Ktag is gonna to read Bosch Me 9.7 Mercedes (P102)

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 11

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 12

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 13

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 14

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 16

 

KTAG Reads Bosch ME 9.7 from Mercedes S350 (W221) 2006 17

 

 

Success! Then save data.

 

Result: Ktag can read Me 9.7 Mercedes without any issue!

 

 

Src:

http://www.obdexpress.co.uk/service/how-ktag-reads-me-97-...