topblog Ivoire blogs

18/05/2018

Ktag 6.070 Ksuite 2.08 reads Ford Transit 2.2 SID 208

Firmware: Ktag 6.070

Software: Ksuite 2.08

Car: Ford Transit 2.2 cdi 2012g, block SID 208

 

Tips:

Ford Transit 2.2 cdi 2012g. block SID 208. It is necessary to remove the soot. The manual says that first you need to connect the K-Tag to the OBD connector with a cable 144300T108. Click on the ID and follow the instructions for unlocking, and then on the table you can merge and fill the firmware.

 

Cable 144300T108 pinout: 
KTAG_DB15 —> OBDII

11 ————> 04; 05 (Ground)

07 ————> 06 (CAN_H)

14 ————> 07 (K-Line)

15 ——- —–> 14 (CAN_L)

05 ————> 16 (Battery Power)

Note that It is unlocked on the table, if you do not plan to write in the outlet in the future, you can not unblock it.

ktag-cable-144300T108

 

Procedure: Ktag firmware 6.070 reading 2008 Ford Transit 2.2 SID 208

ktag-7.020-ford-transit-sid-208-1

 

ktag-7.020-ford-transit-sid-208-2

 

ktag-7.020-ford-transit-sid-208-3

 

ktag-7.020-ford-transit-sid-208-4

 

ktag-7.020-ford-transit-sid-208-5

 

ktag-7.020-ford-transit-sid-208-6

 

ktag-7.020-ford-transit-sid-208-7

 

ktag-7.020-ford-transit-sid-208-8

 

ktag-7.020-ford-transit-sid-208-10

 

ktag-7.020-ford-transit-sid-208-11

 

ktag-7.020-ford-transit-sid-208-12

 

Done!

Src:

http://blog.obdexpress.co.uk/2018/05/18/ktag-6-070-reads-...

 

Écrire un commentaire