topblog Ivoire blogs

16/11/2017

SD connect c4: Please insert batteries (Solved)

Problem:

 

Hello MB star

I just recieved My tablet and it looks and work Very good .

But The sd connect interface is Saying “please put in batteries”

What type of batteries is it ?

 

Solution:

 

This problem same to :

 

SD connect compact 4 mux display: Favor inserir baterias(Please insert batteries)

 

Here you go :

 

 

 

Please prepare the following tools:

how-to-install-sdconnect-c4-battery-Picture1.jpg

 

 

①— SDconnect multiplexer which need to input the batteries。

 

②— 6 units Ni-MH Rechargeable batteries,Size:AA, Voltage:1.2V, Capacity:above 1700mA。

 

③— 1 unit 108M WIFI Card。

 

④— Plum screwdriver,Specification:T-20

 

 

 

 

 

Take out the rubber:

2.1 Use the T20 Plum screwdriver to take out the screws as below.

 

how-to-install-sdconnect-c4-battery-Picture2jpg

 

2.2 Take out the rubber as below.

 

how-to-install-sdconnect-c4-battery-Picture3

 

①— Batteries Space.

 

②— WIFI Card Space.

 

③— SD Card Space.

 

 

 

 

 

Insert the Rechargeable batteries.

3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.

 

how-to-install-sdconnect-c4-battery-Picture4

 

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.

 

how-to-install-sdconnect-c4-battery-Picture5

 

3.3 Insert the batteries. Note the Battery polarity.

 

how-to-install-sdconnect-c4-battery-Picture6

 

3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries.

 

how-to-install-sdconnect-c4-battery-Picture7

 

3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished.

 

 

 

how-to-install-sdconnect-c4-battery-Picture8

 

Installing WIFI Card.

4.1 Inserting the WIFI Card into the WIFI Card Space. Please make the correct direction.

 

how-to-install-sdconnect-c4-battery-Picture9

 

4.2 Push it to make it totally connected.

 

how-to-install-sdconnect-c4-battery-Picture10

 

4.3 Cover the rubber and fix the screws to finish all the work.

 

 

Note 1:

 

Go to the info section within DAS Xentry— search SDconnect and you will find what all the SDconnect symbols defined!!

 

sdconnect-c4-self-diagnosis-1

 

Note 2:

 

pls check these picture, you can choose self-diagnosis your SD connect c4

 

 

 

sdconnect-c4-self-diagnosis-2

 

sdconnect-c4-self-diagnosis-3

 

 

 Source: