topblog Ivoire blogs

13/11/2017

How to program VW Polo 2009 4th IMMO NEC+24C32 Key with Lonsdor K518ise via OBD

This steps guide of  how to use  Lonsdor K518 key programmer program VW Polo 2009 4th IMMO NEC+24C32 Key via OBD.

Key information:

Original key: 3-button folding remote key

Frequency: 433MHz

Chip type: Special ID48 chip (TP23)

Device to program: Lonsdor K518ISE key programmer

 

 

Procedure:

 

Connect K518 host with vehicle via OBD diagnostic socket

Select Immobilizer->VAG->4th Immobilizer->Identify Immo type

 

lonsdor-k518-vw-polo-4

Lonsdor K518 identified immo type: 4th IMMO

 

lonsdor-k518-vw-polo-5

 

K518 detect vehicle part number and immo type

lonsdor-k518-vw-polo-5

 

Select NEC 24C32

lonsdor-k518-vw-polo-7

 

Then Backup EEPROM and save data

lonsdor-k518-vw-polo-8

 

 

Select Read Immobilizer data

lonsdor-k518-vw-polo-9

 

Lonsdor K518ISE read vehicle information: VIN, CS, PIN, key number and key ID

lonsdor-k518-vw-polo-10

 

Select Make Dealer Key

lonsdor-k518-vw-polo-11

 

Push card slot on K518 main unit from right direction

Insert new key to be programmed into card slot

lonsdor-k518-vw-polo-12

 

lonsdor-k518-vw-polo-13

 

Select Key Learn

lonsdor-k518-vw-polo-14

 

Enter key number to be programmed (keys that will start vehicle )

lonsdor-k518-vw-polo-15

 

Insert key and turn ignition on one by one

I.E, Dashboard shows 1-2 means 1 key has been learnt, 2-2 means 2 keys have done

lonsdor-k518-vw-polo-16

 

Program success.

lonsdor-k518-vw-polo-17

 

Test remote and star car

 

 
 
 

SOURCE:

https://lonsdor-k518ise-served.blogspot.com/

Écrire un commentaire