topblog Ivoire blogs

16/09/2017

How to install Toyota Techstream v12 on Windows 7 Pro 64bit

Fair warning: I would not consider this a good investment for someone who does not have a fair degree of tech skill, both when it comes to understanding computers (particularly manual driver installation and USB-based communications) and the Toyota TechStream software itself.

First and foremost: The mini vci cable worked perfectly well for me on a 2017 Sienna SE, using TechStream version 12.x.127(the current release as of the date of this post), based on a Lenovo ThinkPad T500 running Windows 7 Pro 64-bit. However, in order to get to that point, I found myself using a different interpretation of the instructions another buyer (‘DuckDivesInWater’) provided in their review. I have no doubt the difference was caused by the fact I’m using a late version of TechStream.

PLEASE NOTE: The instructions below are based on a 64-bit OS. THE PROCESS FOR A 32-BIT SYSTEM WILL BE DIFFERENT.

1). Do NOT try to install the software on the CD directly if you’re running a 64-bit OS! I guarantee it will fail. Horribly. Also, my antivirus software (ESET Smart Security) threw a fit about several files on the CD being contaminated with a trojan. I believe this to be a false positive, caused by the type of anti-hacking application packager the device’s manufacturer (XHorse Electronics, out of China) used to bundle the software together, but be careful no matter what. Google search is your friend!

I will add that, after manually unpacking and installing the device driver, I had no other problems and no sign of virus or trojan infection.

2). Start by installing whatever version of Toyota TechStream you plan to use. Plenty of info on the Internet to help you out with that.

3). Copy the file “MVCI Driver for TOYOTA.msi” from the 10.10.018 folder on the CD to a temporary directory of your choice.

4). Open a command prompt window and change to said temporary directory. Extract the contents of the .msi file with this command (be sure to INCLUDE the double quotes where shown):

msiexec /a “C:tempMVCI Driver for TOYOTA.msi” /qb TARGETDIR=c:tempmvci

5). Once that’s done, delete the ‘MVCI Driver for TOYOTA.msi’ file so it doesn’t get run by accident.

6). Close your command prompt window. In Windows Explorer, go to C:Program Files (x86) and create a new folder under it called “XHorse Electronics”. Change to that folder and create another called “MVCI Driver for TOYOTA TIS”.

7). Next, copy the whole content of c:tempmvci (or whatever temp directory you used to extract the .msi into) to “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS”

8). Plug your Mini VCI cable into a USB port. Windows may complain that it couldn’t install the driver. Ignore any such errors for the moment.

9). Open Device Manager and locate the failed item in the hardware list. It should be easy to spot, as it will have a yellow exclamation point overlaying it. You’ll probably see it under ‘Other Devices.’ Right-click on the device, select ‘Update Driver’ and ‘Browse my computer.’ Point the wizard to the folder you created in step 7: C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS

10). Note that you will likely need to do this twice, once for the VCI chip itself and once for the USB-to-serial-port translation. Point the second prompt at the same folder. Once the process finishes, you should see the two new devices in your hardware list.

11). In order for TechStream to recognize and use the Mini-VCI cable, you will need to add a registry tweak. Some Internet searching will probably turn up a pre-written file, called ‘mvci-x64.reg’ or you can create the file yourself with a text editor as follows:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINESOFTWAREWow6432NodePassThruSupport.04.04]

[HKEY_LOCAL_MACHINESOFTWAREWow6432NodePassThruSupport.04.04XHorse – MVCI]

“Name”=”XHorse – MVCI”

“Vendor”=”XHorse ELECTRONICS Co.,Ltd.”

“ConfigApplication”=”C:\Program Files (x86)\XHorse Electronics\MVCI Driver for TOYOTA TIS\FirmwareUpdateTool.exe”

“FunctionLibrary”=”C:\Program Files (x86)\XHorse Electronics\MVCI Driver for TOYOTA TIS\MVCI32.dll”

“APIVersion”=”04.04”

“ProductVersion”=”1.1.0”

“ProtocolsSupported”=”J1850VPW:1, J1850PWM:1, CAN:1, ISO9141:1, ISO14230:1, ISO15765:1”

“J1850VPW”=dword:00000001

“J1850PWM”=dword:00000001

“ISO9141″=dword:00000001

“ISO14230″=dword:00000001

“CAN”=dword:00000001

“ISO15765″=dword:00000001

“SCI_A_ENGINE”=dword:00000000

“SCI_A_TRANS”=dword:00000000

“SCI_B_ENGINE”=dword:00000000

“SCI_B_TRANS”=dword:00000000

12). Finally, run Techstream. Go to Setup | VIM Select menu and select the “XHorse – MVCI”

You should now be able to connect to your car’s OBD port and use TechStream just as your dealer’s tech would. Be careful not to change anything you’re not familiar with! It’s too easy to screw something up.

My thanks to ‘DuckDivesInWater’ and ‘JHood’ on the ft86club dot com forums.

Happy tweaking.

 

Source:

Écrire un commentaire