topblog Ivoire blogs

11/09/2017

Vxdiag Vcx Nano download FREE with reviews (09.2017)

Latest update at  Sept.11th,2017,Free download Allscanner Vxdiag Vcx Nano diagnostic software the latest version for Honda, Ford, Mazda, VAG, Subaru, GM, Jaguar and Land Rover. And Vxdiag Vcx Nano reviews of OK and K.O. experience for you.

 Part 1: Vxdiag Vcx Nano software download

 

 

 

 

FORD IDS V100 EN/CN

Ford IDS 106 EN

 

 

Mazda IDS 106.00.exe 485.1 MB

 

 

 

GM Tech2Win16.02.24.rar 138.9 MB

GM GDS2 VM.iso 3.95 GB

 

 

2016.4 Subaru SSM.iso 1.95 GB

 

 

JLR SDD software

JLR SDD patch.rar 47.4 MB

 

 

ODIS Service 4.1.3

ODIS-S 3.03

VAS-PC V19 EN5054.rar 3.48 GB

 

 

 

Part 2: Vxdiag Vcx Nano best price

 

Vxdiag Vcx Nano for sale:

 

 

 

Part 3: VXDIAG VCX Nano reviews

 

 

VXDIAG VCX Nano Mazda Review:

 

The VCX Nano I took apart seems to be a custom design to emulate in hardware part of the hardware/software of the VCM II but the driver is most important too. I did not take pictures but gently peeling down the stickers reveals 4 screws. Once inside it is a very simple board with a ST micro cortex M4 STM32F4 Series based micro controller doing the work. The FT serial to usb chip-set and some caps and a space that was blank for I assume either the WIFI or Bluetooth module. I googled the device and did see a Russian site where a guy took apart a VW version and it had more chips and and older generation micro-controller.

Soldering looks like reasonable quality surface mount and no hand work or redo's.

 

Vxdiag vcx nano gm review:

I have one oof these, You need a 64bit version of windows to run the GDS system on VMware, it's already supplied as a VM machine, the Tis software works perfect under windows (not VM) comes with installer

I haven't have any problems, I use the USB facility although it does have wifi also

 

 

VXDIAG Vcx Nano Ford Review:

 

VXDIAG VCX NANO is the same as VCM2 with a single board (which is very bad clone of VCM2).

 

By satria_wr

Vehicle: 2014 Ford Ecosport 1.5L Ti-VCT 110hp

 

 

My clone vcm2 was able to update the module online.

The single board is known to brick module since it doesn't have complete chip on it.

 

By Automate

Vehicle: 2010 Ford Fusion Hybrid

 

 

The VCX Nano I took apart seems to be a custom design to emulate in hardware part of the hardware/software of the VCM II but the driver is most important too. I did not take pictures but gently peeling down the stickers reveals 4 screws. Once inside it is a very simple board with a ST micro cortex M4 STM32F4 Series based micro controller doing the work. The FT serial to usb chip-set and some caps and a space that was blank for I assume either the WIFI or Bluetooth module. I googled the device and did see a Russian site where a guy took apart a VW version and it had more chips and and older generation micro-controller.

Soldering looks like reasonable quality surface mount and no hand work or redo's.

 

By stvkram

Vehicle: 2003 Mazda 6 3.0 V6 220hp

 

 

I test this tool, i buy the wifi version. Ford/GM/Toyota/VW/JagLR all works with wifi or usb connection :D

 

By satria_wr

Vehicle: 2014 Ford Ecosport 1.5L Ti-VCT 110hp

 

 

I own VXDIAG VCX Nano WiFi. I use IDS v103.xx fine without issue. Latest update of VXDiag gives it a better stability when doing programming.

 

Tony Back

Vehicle: Ford Focus

 

 

Well, I just took the chance and bought one.

Couldn't figure out how to get WiFi working on it, so I installed the driver

for USB and used USB instead.

Forscan detected it as J2534, and no errors was reported.

It didn't find as many modules as my Vlink adapter does, but it had

the same missing fuel trims for bank 2 for my Scorpio 24V  ;)

 

One hurdle with this device though - it is almost impossible to connect it

to the Scorpio, because the plug is a bit hidden, and this device is very big.

Anyone buying it should consider, if a small OBD2 extension cable is needed too.

 

By Yoda

Vehicle: Scorpio 2,9 24V 207HK 1997

 

 

I can add that regarding the VCX Nano for ford/mazda, I took mine apart and no bluetooth module is present. The bluetooth capabilities advertised on the main Allscanner site it not accurate. I can not speak for the WIFI version but I have the usb version and have used it with my 2003 Mazda 6 V6 and AFTER installing the "pass-thru" driver (J2534) it works perfectly and fast with FORSCAN.

 

By stvkram

Vehicle: 2003 Mazda 6 3.0 V6 220hp

 

 

Full chip high quality VCM II (SP177-C) is much better than VXDIAG NANO.

But be careful programming!

 

By ipy1975

Vehicle: 2015 Ford Mustang GT 5.0L V8

 

 

Écrire un commentaire