topblog Ivoire blogs

29/07/2017

Programme de programmation RAM 700 2016 par Tango + VVDI Prog

Comment programmer et élaborer la clé perdue de RAM 700 2016, micro MC9S12DG256? Ce didacticiel pour vous:

Tool preparation:Tango key programmerand Xhorse vvdiprog.

Tango + VVDI Prog for RAM 700 2016 all key lost(1

 

Tango + VVDI Prog for RAM 700 2016 all key lost(2

 

Tango + VVDI Prog for RAM 700 2016 all key lost(3

 

Tango + VVDI Prog for RAM 700 2016 all key lost(4

 

Tango + VVDI Prog for RAM 700 2016 all key lost(5

 

Tango + VVDI Prog for RAM 700 2016 all key lost(5

 

Tango + VVDI Prog for RAM 700 2016 all key lost(6

 

Tango + VVDI Prog for RAM 700 2016 all key lost(7

 

Tango + VVDI Prog for RAM 700 2016 all key lost(8

 

Tango + VVDI Prog for RAM 700 2016 all key lost(9






This post source from Car OBD2 Tools global one-stop shopping supplier ---OBDexress.co.uk Official technical blog :http://blog.obdexpress.co.uk/2017/07/29/tango-vvdi-prog-f...

04:27 Publié dans Blog, car key programmer | Tags : tango | Lien permanent | Commentaires (0)

28/07/2017

Free Download Rheingold 3.55.11 ISTA-P 3.58.3.003 torrent

Free download

Rheingold 3.55.11 Standalone ISTA-P 3.58.3.003 torrent (being tested)

ISTA-D 3.54.12 ISTA-P 3.58.0.500 Software (tested, cracked)

 

BMW software is offered here to free download, to work with INPA cable or BMW ICOM A2 for BMW diagnosis and programming.

 

Standalone versions of ISTA-D and ISTA-P.
SQLiteDBs 3.55.14, including EN, DE, RU, OTHER.
Workable device:

BMW K+dcan inpa cable

ICOM A2 emulator

Rheingold-3.55.11-ISTA-P-3.58.3.003 (1)

 

Rheingold-3.55.11-ISTA-P-3.58.3.003 (2)


For unpack archives use 7-zip 15.12 or Winrar 5.30 and higher ( unblock archives if needed ).

Install:
Ediabas, Java, vcredist 2010 x86 x64, vcredist 2013 x86 x64, vs90_piaredist, net framework 4.5.2 or higher.

Rheingold :
Unpack, for examle in D:Rheingold, unpack and copy SQLiteDBs in RheingoldSQLiteDBs, run RCleanerV4.3.exe from Tools folder.
Apply ISTA-D Reg Fix for your system (x86 or x64) from Tools folder.
Run D:RheingoldTesterGUIbinReleaseISTAGUI.exe.
If ask license, enter it from License.txt file. Enter 1 in ISIS field, ignore error and press ok.

ISTA-P :
Install Networktool.exe, for K-DCAN cable. (ICOM doesn’t need it).
Unpack in the root of any drive, for example D:ISTA-P.
Run BMW ISTA-P Loader V4.9.exe from Tools folder.
Choose language, resolution and expert mode options. Ignore message about resolution.

This post source from Car OBD2 Tools global one-stop shopping supplier ---OBDexress.co.uk Official technical blog :http://blog.obdexpress.co.uk/2017/07/28/rheingold-3-55-11...

27/07/2017

OPCOM Op-com Firmware 1.60 1.59 1.45 1.39 Update User Manual

Here’s the OPCOM firmware update user manual. The op-com software version use one or other firmware version as fw 1.33, fw 1.39, fw 1.41, fw 1.43, fw 1.44 fw 1.45, fw 1.47 fw 1.59 fw 1.60 ( the last one ).

 

OPCOM firmware introduction:

OP-COM China clone ( op-com 100219a ) from 2009 use fw 1.39 – do not use other firmware

 

OP-COM software from 2011 use fw1.44

 

OP-COM software from 2012 used fw 1.45 and the software released at the end of that year used fw1.47

 

OP-COm software from 2014 used fw1.59 (fw 1.45 & 1.59 come with the same pcb)

 

VAUX-COm version, Romanian and German version of OP-COM used fw1.60

 

So the difference it is not in the firmware as 1.44, 1.45, the difference it is in the software version

 

NOTE:

– With other words if you have an op-com tool that it has firmware 1.39 and you’ll try to use it

– with for instance OP-COM 131223c English version the software will upgrade the firmware of your interface to the version that its need- to 1.59

– If then you try one of the version in Romanian/ German or vaux-com version 131223 the software will upgrade the firmware of the tool to the fw 1.60

 

So now in conclusion. You do not need to change the firmware of your tool with one or other. You only need to use the necessary firmware for the software version that you are using it.

OPCOM firmware update:

changing (upgrade or downgrade) firmware version in op-com chinese clone is at risk – you’ll damage the tool and it will not work anymore

 

The only way to change Opcom firmware is

 

to replace the MCU with a original Microchip PIC18F458

remove 2 component from PCB

Remake a connection on bord and cut another one

Then reprogram the new brand chip PIC18F458 and you can have a brand new clone that will be available to upgrade the firmware of the interface

NOTE:

– The firmware must be the one that it is required by the software version

– Do not use other one because will not 100% correct

– A normal clone not model cannot works with the Model software that works with as we named HQ clone

– This not depend on the ept or firmware and depend on the FTDI ID and PIC dump. All it is about a marriaged dump of PIC MCU with the FTDI ID – a uniq combination

– firmware 1.59 and 1.60 update is most populous:

 

Good luck