topblog Ivoire blogs


Creator User Manual Of How To update Software

Here I will tech you how to update Creator products (incl Creator C500,C310,C330, C100,C110 etc) step-by-step here .

Note: This Update method is applicable to all Creator products!

Here is the procedure:

Step 1. Setup Update tools

Download the update tool from official 
Double click the [Setup file] to setup the tool. Operate follow the instructions, and finish to setup.
After finish setup, there will be a icon of scanner in desktop.

Step 2. Download the software

Download from official website
Note: C100 and C110 software is only fix SN is C1XX 002000 02 or later
You can find the software what you want.

Step 3. Run the update tool

Double cleck the update tool icon and Run the update tool and Operate in accordance with photographs
Used the USB cable connected to scanner and PC, if connect success, the software on pc will shown as below

Click [Update] button.

Cleck red rang , you can change the path , and find the updatefile which recive.
Select update file and click [open] button.
Into the upgrade interface, wait for the end of upgrade
Do not power off during upgrade!
Do not Plug or Unplug USB tools during upgrade!

Step 4. Start Update

Waiting for a few minutes. The software will update the scanner tool.
Finish Update.
When the update is finished , the screen on PC will show as below.
If update success, the software will display [Update success!];
if update fail, it will display [Update fail! Try again].
Press [finish], the scanner is already updated, and you can unplug the scanner from PC.
This article is from the leading online exporter of OBD2 Scanner:

MPPS v21 software,car list and review

MPPS V21 adds boot mode support for controllers with the tricore processor and adds OBD support.


MPPS V21 OBD Tricore Boot software


MPPS V21 hardware:





MPPS V21 pcb


MPPS v21 software: (ver.


*Volvo ME7 CAN R/W/Cks

Bench only at the moment.


*Volvo EDC15C11 CAN R/W/Cks

Bench only at the moment.


*Bentley ME7.1.1 CAN R/W/Cks

*Master/Slave ECUs.


*VAG ALL TDI Bosch EDC17 X UDS drive now supports *EDC17C46 and EDC17C64 ECUs.

Must be unlocked first using an MPPS container file.


*Generic Tricore VAG Only Multi ECU – MPPS Container file flasher.

*Can be used to flash firmware updates and OBD UNLOCK files created using new VAS FRF file utility in tricore boot plugin.


-Tricore Boot

*Added new file checksum utility for tricore, now supports:

(M)EDC Flash checksum

(M)EDC Eeprom checksum

Simos PCR

Simos 8

Simos SID305

Added new VAS FRF file special function utility in tricore boot:

Create MPPS container file from FRF file.

Can be used to perform software updates using new protocol in MPPS.

Create OBD UNLOCK MPPS container file from FRF file.

Can be used to perform OBD unlock using new protocol in MPPS, currently supports Bosch EDC17C46 and EDC17C64.

Create READ UNLOCK MPPS container file from FRF file.

Can be used to perform full read unlock using new protocol in MPPS, currently supports Simos PCR. More options will be added for this ECU in future releases!

Create BIN file from FRF file.

Can be used when ECU can not be read from OBD.


Mpps v21 car list download on Mega:


MPPS V21 review:

The tool works as it is designed for… R/W ECU without issues.


The cable is a nice quality OBD male cable, it looks like many ones, but it’s a true EU Clone MPPS V21 fully open (Tricore, MultiBoot, OBD). Tricore cable adaptor looks like many ones too, but very well made!

The tool was initially sold as MPPS v18, before we knew about the timebomb amt put inside of MPPS v21 we had told users they could update, our mistake.




MPPS V21 hasn’t been tested be professional engineers work for For sake of security, it would be a good option of using MPPS V18










Lanch X310 VS golo Easydiag+ VS Lanch M-diag

Which obd2 code reader is best ?Lanch X310 or golo Easydiag+ or Lanch M-diag?here ,we make the comparison among  three of them.

Launch M-Diag mobilediag OBDII code reader is much more powerful than Launch X431 Easydiag 2.0 and Golo Easydiag+. It not only excels in basic obdii diagnosis but special functions.


Launch X431 Easydiag 2.0

Golo Easydiag+

Launch M-Diag



 Golo Easydiag+




$120 at ebay



Apple ISO

Generic OBDII check

I/M check

Actuation test


4 systems diagnosis(Engine, transmission, ABS, SRS)

FULL systems diagnosis

√incl. bl-directional capabilities

Special functions….

IMMO & key programming

Oil / service reset

Brake pads

Battery matching

ABS bleeding

TPMS reset

Throttle body adaption

Steering angle reset

DPF regeneration

Injector coding



All can work with Android and ISO systems

Launch easydiag 2.0 for €45 only works for four systems diagnosis

Golo easydiag+ works for full system diagnosis

Launch M-diag code scanner for €56 not only covers X431 easydiag 2.0 and Golo easydiag+ (four+full systems diagnosis); but adds new special functions incl.Oil / Service reset,  ABS bleeding, IMMO & key programming, throttle body adaptation, brake pads, steering angle reset, battery matching, DPF regeneration, Injector coding.

Buy the one depending on your own personal use.But it’s wise to get the more powerful M-diag with the same dollars

This article is from the  leading online exporter of obdii scanner  official blog:

07:44 Publié dans Blog | Lien permanent | Commentaires (0)