topblog Ivoire blogs


Creator User Manual Of How To update Software

Here I will tech you how to update Creator products (incl Creator C500,C310,C330, C100,C110 etc) step-by-step here .

Note: This Update method is applicable to all Creator products!

Here is the procedure:

Step 1. Setup Update tools

Download the update tool from official 
Double click the [Setup file] to setup the tool. Operate follow the instructions, and finish to setup.
After finish setup, there will be a icon of scanner in desktop.

Step 2. Download the software

Download from official website
Note: C100 and C110 software is only fix SN is C1XX 002000 02 or later
You can find the software what you want.

Step 3. Run the update tool

Double cleck the update tool icon and Run the update tool and Operate in accordance with photographs
Used the USB cable connected to scanner and PC, if connect success, the software on pc will shown as below

Click [Update] button.

Cleck red rang , you can change the path , and find the updatefile which recive.
Select update file and click [open] button.
Into the upgrade interface, wait for the end of upgrade
Do not power off during upgrade!
Do not Plug or Unplug USB tools during upgrade!

Step 4. Start Update

Waiting for a few minutes. The software will update the scanner tool.
Finish Update.
When the update is finished , the screen on PC will show as below.
If update success, the software will display [Update success!];
if update fail, it will display [Update fail! Try again].
Press [finish], the scanner is already updated, and you can unplug the scanner from PC.
This article is from the leading online exporter of OBD2 Scanner:


Вот вам решение вопроса на том сайте


crack для microsoft office 2007

Écrit par : Terryorips | 01/02/2017

Les commentaires sont fermés.