topblog Ivoire blogs

30/11/2016

Xprog-m v5.7.0 software on Windows 7 64bit installtion

Latest Version X-PROG Box ECU Programmer XPROG-M V5.70 at obdexpress.co.uk,
This is the only version XPROG-M can decrypt new version BMW CAS4.Hard disk and USB Dongle, more convenient and secure.And  XPROG V5.7  software can be installed on Windows XP, Windows 7

Here is the installtion program:

Xprog version:

software: v5.7.0

firmware: v3.9

 

 

OS to use for xprog-m v5.7.0:

Windows 7 Professional

64 bit operating system

4.00GB RAM

 

Ready to install XPROG 5.7.0:

Open DVD disk (D:)

Copy all files to Desktop, ready for use

 

Part 1 - Install Adobe Reader XI

Run AdbeRdr11000_zh_CN application to install

Preparation steup...

Click Next

Auto install, click Install

Installing Adobe Reader XI...

Adobe Reader XI installation success. Click Finish

install-xprog-5-7-0-1

Part 2 - Install Registry Editor

Run The registry

Yes to continue

Keys and values have been successfully added to the registry. Click OK

install-xprog-5-7-0-2

 

Part 3 - Install driver software and computer management setup

Open folder XPROG-BOX5.7.0English on Desktop

Then open XPROG-BOX5.7.0English-> XProgDesktop application

Accept the agreement

In the xprog v5.7.0, you will find that Port Undefined

The system also prompts “Device driver software was not successfully installed”

install-xprog-5-7-0-3

Click the prompt info (xprog box: no driver found) and click Close

Open Computer Management

Select Device Manager-> XPROG-BOX

Right click for Update Driver Software...

install-xprog-5-7-0-4

Browse my computer for driver software manually

Browse Desktop/ XPROG-BOX drive/ WINDOW 7

Then OK.. Next

Install this driver software anyway

Windows has successfully updated your device software. Click Close

install-xprog-5-7-0-5

Back to Computer Management

Select Device Manager-> Other Device-> USB Serial Port

Right click for Update Driver Software...

install-xprog-5-7-0-6

Browse my computer for driver software manually

Browse Desktop/ XPROG-BOX drive/ WINDOW 7

Then OK.. Next

Install this driver software anyway

Windows has successfully updated your device software for XPROG-BOX programmer (COM3). Click Close

install-xprog-5-7-0-7

In Computer management, Ports (COM & LPT)-> XPROG-box programmer (COM3)

install-xprog-5-7-0-8

In xprog software v5.7.0, Port COM3 (XPROG-box)

install-xprog-5-7-0-9

 

Part 4 - XPROG 5.7.0 Win 7 is ready for use

XPROG-BOX 5.60 programmer read and write MCU MC68HC908GR16_FLASH+security

 

xprog-software-v5-7-0-read-write-mcu-1 xprog-software-v5-7-0-read-write-mcu-2 xprog-software-v5-7-0-read-write-mcu-3 xprog-software-v5-7-0-read-write-mcu-4 xprog-software-v5-7-0-read-write-mcu-5 xprog-software-v5-7-0-read-write-mcu-6 xprog-software-v5-7-0-read-write-mcu-7 xprog-software-v5-7-0-read-write-mcu-8 xprog-software-v5-7-0-read-write-mcu-9 xprog-software-v5-7-0-read-write-mcu-10 xprog-software-v5-7-0-read-write-mcu-11 xprog-software-v5-7-0-read-write-mcu-12 xprog-software-v5-7-0-read-write-mcu-13 xprog-software-v5-7-0-read-write-mcu-14 xprog-software-v5-7-0-read-write-mcu-15 xprog-software-v5-7-0-read-write-mcu-16 xprog-software-v5-7-0-read-write-mcu-17 xprog-software-v5-7-0-read-write-mcu-18 xprog-software-v5-7-0-read-write-mcu-19 xprog-software-v5-7-0-read-write-mcu-20 xprog-software-v5-7-0-read-write-mcu-21 xprog-software-v5-7-0-read-write-mcu-22

Done!

 

Where to buy Xprog v5.7.0:

http://www.obdexpress.co.uk/wholesale/x-prog-box-ecu-prog...

29/11/2016

Flyobd2 FVDI2 VAG Commander reviews

I bought Flyobd FVDI generation 2 for VAG group vehicles. The only improvement they did was on vag group and that improvement did affect other software.  The rest = 0 or bad.

Hmm… Maybe i can also say nothing new on on VAG. it’s v24 also. Only this time it can process info over the Internet and it function same as avdi v24 but does not support JC cluster and cannot read immo data for Audi from 2009 up , and also when trying to get cs for key coding after processing data over internet it shows 00 00 00 00 00 00 00
What i did on VAG vehicles with this Fvdi2 vag commander:

fvdi-commander-vw-audi-seat-skoda-vag

– Brand/Model of car : VW Caravelle
– Year of car : 2001
– Feature in relation : transponder programming from dump
– Version of FVDI : Tagkey Tool 6.2
– Result : Error (4pcs. PCF7935 damaged)
Dump recognized good, pin readed correctly. Problem solved programming prepared PCF7935 to VW id44 via OBD.

 

– Brand/Model of car : Skoda Roomster
– Year of car : 2006
– Feature in relation : pin read and key programming
– Version of FVDI : VAG 24.0
– Result : OK

 

– Brand/Model of car : golf 6 TDI 2012
– Feature in relation : with CS (component protection ) , pin read and key programming
– Result : ok
– Brand/Model of car : VW Passat 3C 2.0tdi
– Year of car : 2007
– Feature in relation : learning key
– Version of FVDI : OLD 18
– Result :ok

 

– Brand/Model of car : VAG
– Year of car : 1998-2002
– Feature in relation : pin read from EDC15
– Version of FVDI : VAG 24.0
– Result : Error (can’t connected)

 

– Brand/Model of car : Audi A4
– Year of car : 2003
– Feature in relation : pin read and key programming cluster RB4 crypto
– Version of FVDI : VAG 24.0
– Result : Error
After read pin, eeprom content in RB4 faulty. Car don’t recognized original key. Solved by write content saved after first read.

 

– Brand/Model of car :Seat Leon 1PA

– Year of car : 2011
– Version of FVDI : fvdi 21
– Feature in relation :add new key
– Result : successfully
I would only suggest fly company to focus more on individual software like vag group and deliver like Xhorse VVDI2 than try to do many and only anger and frustrate customers

 

28/11/2016

Volvo 88890300 Vocom Interface WiFi Setting Steps

Item number SH65 is Volvo 88890300 Vocom Truck Diagnostic  WIFI version.Here we make  a introdution of how to set wifi  for volvo 88890300 vocom step by step .

Step1:

Connect Volvo Vocom with computer via USB cable.

Start PPT software

Click on [Menu] and click [Settings]

volvo-88890300-vocom-wifi-1

Step2:

Click [Communication unit configuration]->[configuration]

And choose [USB+Directly to Communication unit]

volvo-88890300-vocom-wifi-2jpg volvo-88890300-vocom-wifi-3

Click [Direct]->[Restore default values]->OK-> [Apply]

volvo-88890300-vocom-wifi-5 volvo-88890300-vocom-wifi-4

Step3:

Click OK then Disconnect USB cable.

volvo-88890300-vocom-wifi-6

Step4:

Go to [Settings]->[Comm.unit Selection]->[Communication unit 8889300 ….Nickname], then click OK

volvo-88890300-vocom-wifi-7

Set up success!Now you can use signal get wireless signal.

 http://blog.obdexpress.co.uk/2016/11/27/set-wifi-fo...