topblog Ivoire blogs

31/10/2016

VVDI2 reviews on Key Program And Corretion Mileage

Test ok 

I added these keys experience with :
Added a key bcm2 on a 2013 Audi A5 worked flawlessly.

Add a spare key Audi BCM2 by OBD worked fine.

A6/Q7 EZS Kessy:

Added a dealer key (remote source from the dealer) without issues, seemed to read everything properly but I had a working key to begin with.

Audi A6:

Tested with A6 read kessy working, learned new key

Skoda Octavia 2006:

Got CS & PIN, programmed key fine.

VW Passat B5:

Pulled PIN and programmed key ok.

VW Passat B6 2009:

Pulled PIN but couldnt get 6 bytes CS, needed comfort dump.

VW Transporter T5 2006:

Pulled PIN Programmed key, no remote programming.

I use VVDI2 to change mileage on following cars:

Audi A4 2006:

Mileage correction success

2007 Audi A4 B7 RB8 crypto

Mileage correction ok

VW Passat B5:

Corrected miles.

Fail:

Audi A6 2003:

Mileage correction fail. car not start. remove battery terminal. car start.

vvdi2-key-Key-Programmer

source:http://www.mileageprogrammer.com/vvdi2-test-key-program-a...

28/10/2016

DAS not recognize all ECUs through 38 pin cable,how to do

MB Star diagnosis DAS is working perfect on any car with the 16 pin cable and Xentry also is working perfect. But when DAS is connecting with the w210 car through 38 pin cable, DAS only recognize 3 ECUs then nothing, i changed the 38pin cable gives me the same result.

das-hhtwin-not-recognized-ecus

i used windows7 ultimate x64bit with Xentry openshell 5.2016, all patches and fixes are applied.

 

I changed the old cable with another HQ 38 pin cable, but the same problem!

tried on different car, same problem,
same car tested on old system (MB Star C3 Multiplexer+ Windows XP) works perfect

 

HHT-win system, simply a message said:" HHT-WIN is not available on this system"
but as per the photo only few ECUs are detected, then nothing....

 

 

User suggestion on this topic:

Depends on which W210 it is facelift or pre-facelift with FBS3 or older system? For facelift version have to working shortest through DAS. Pre-facelift version/older model is automatically switched to HHT-Win. For example as I remember W168 model year 2003-2004? /I forgot/ is full short test in DAS and then if you click on some ecus then is switched to HHTWin. Facelift W210 model have to working full short test in DAS. This is not HHTWin problem. Maybe your hardware have problem with connection to older cars.

 

Professional advice from mbstartool engineer:

It’s normal. DAS / HHTWin does recognize some ECUs only through 38 pin cable. And there is not ECUs in old cars as many as new cars.

On a side note, no need 38 pin cable if obd connection is ok.

09:37 Publié dans Blog, Shopping, Web | Tags : mb star c3 | Lien permanent | Commentaires (0)

27/10/2016

How to choose Jaguar & Land Rover JLR diagnostic tool

Here is the buying guide with comparison of VXDIAG VCX NANO for Jaguar & Land Rover OEM diagnostic tool, JLR Mongoose cable, VCM2 scanner and DA-VINA J2534 interface.

 

1)
price:

vxdiag vcx nano JLR: €108 (best choice for diagnosis and ecu & key programming)

Mongoose cable clone: €48 (best solution of diagnosis)

JLR VCM2 chinese: €189

DA-VINA J2534: €100

 

1)

workable with the genuine:

Mongoose & DA-VINDA interfaces work with the original JLR SDD IDS software.
2)

Functions:

Wi-Fi: vxdiag vcx nano, vcm 2

Basic diagnosis: all ok

Key making: vcm2, vxdiag nano, DA-VINA

Ecu programming: vcm2, vxdiag nano, DA-VINA

Offline programming: JLR SDD V141 (advised to use with VXDIAG VCX NANO diagnostic tool.)

 

3)

New cars solution:

If you need to new Jaguar and Land Rover model up to 2014 year, DA dongle 2534 or Mongoose pro which version 139.14 up are recommended. Now the SDD version 145 is the one tested without any issues by thousands of people.

 

4)

Vehicle coverage:

JLR Mangoose cable

Work on JLR models before 2014, including
Land Rover: L316, L319, L320, L322, L359, L538

Jaguar: X100, X150, X202, X250, X350, X351, X400
VXDIAG VCX NANO for Jaguar and Land Rover:

Work on Jaguar and Land Rover (2005 - 2014), including

Land Rover: L316, L319, L320, L322, L359, L405,L494, L550, L538

Jaguar: X100, X150, X152, X202, X250, X350, X351, X400

 

JLR VCM2 diagnostic scanner:
Defender, Discovery /LR3/LR4, Range Rover Sport & New Range Rover Sport, New Range Rover, Freelander /LR2, Evoque, XJ – X351, XK – X150, XF

* Range Rover (fully supported apart from viewing Data logger signals from both ECM and TCM

modules simultaneously on 2006MY variants)
DA-VINA SAE J2534 interface:

Work on JLR models after 2005, including
Defender, Discovery /LR3/LR4, Range Rover Sport & New Range Rover Sport, Range Rover, New Range Rover, Freelander /LR2, Evoque, XJ – X351, XK – X150, XF, Xtpye, Stpye and Ftype

 

da-vina-2534-jaguar-landrover-sae-j2534-pass-thru-vehicle-list

5)

Conclusion:

vxdiag vcx nano JLR: €108 (best choice for diagnosis and ecu & key programming)

JLR Mongoose cable clone: €48 (best solution of diagnosis)

source:http://blog.obdexpress.co.uk/2016/10/27/jlr-mangoose-vs-v...