topblog Ivoire blogs

31/08/2016

How to solve VAS 5054A VAS-PC V19 no communication with control unit

Symptom:

Have installed VAS-PC v19 software and driver to work with VAS5054A Bluetooth scanner, but it failed to communicate with the car

 

Error message in VAS-PC:

USB setup in Computer management: Usb serial port (com3)

5054a-vas-pc-no-communication (1)

Fallo en el bus de diagnostico:

La interfaz de diagnostico (VCI) no esta correctamente instalada

Por favor, cierre la aplicacion y configure la interfaz de diagnostico

(Failure diagnostic bus:

The diagnostic interface (VCI) is not properly installed

Please close the application and configure the diagnostic interface)

5054a-vas-pc-no-communication (2)

Fallo en el bus de diagnostico:

Numero de averia: 200.59

(Failure diagnostic bus:

Number of breakdown: 200.59)

5054a-vas-pc-no-communication (3)

Nota:

No es posible establecer niguna communicacion con la unidad de control que hay montada

(Note:

It is not possible to establish any communication with the control unit that is mounted)

5054a-vas-pc-no-communication (4)

 

 

Professional suggestion:

VAS PC V19 should be installed in Ghost Windows XP Professional Sp3 operation system here:

http://www.chinaautodiag.com/html/ghost-windows-xp-profes...

 

source:http://blog.obdexpress.co.uk/2016/08/31/vas-5054a-vas-pc-...

30/08/2016

2016 Nisaan Consult iii plus vs old Consult 3

Obdexpress.co.uk engineers have tested the new Nissan Consult 3 iii plus supports ECU programming without extra pay for the immobiliser cards for the latest Nissan (-2016).

 

Nissan Consult 3                                         Consult 3 plus +

nissan-consult-iii-consult-3-plus

Compared to the old Consult iii, 2016 Consult iii plus highlights:

I- directly do ECU programming without extra cards for programming

II- support all Nissan and Infiniti from 1996 to 2016, while Consult iii only for cars till 2011

III- cover ALL functions of Consult ii and Consult iii:

1.Swift diagnosis and swift repairs through automated operations

The selection of CAN type as well as the identification of malfunction locations are completely automated, allowing CAN diagnosis to be done 17 times faster than previous method where the diagnostics system needed to be supplemented by the service manuals. Repairs involving reprogramming of the in-vehicle computer can be completed 1.5 to 2.5 times faster with the new system.
2.Automated Self-Diagnostics

The system is able to perform accurate diagnosis without having to rely on the diagnostic skills of technical staff at the dealership.Increased efficiency in operations based on wireless technology.
With wireless vehicle communication interface, it is possible to check the condition of the vehicle from either  inside or outside the vehicle. At dealerships in Japan, it is possible to access the Nissan network to retrieve both the maintenance technology data related to the diagnosis results and spot adequate information on service manual. The dealerships are also able to access their service database and refer to the vehicle’s maintenance history on the laptop PC.

 

3.Capable of handling multiple complex defects

The diagnostics tool is equipped with various functions including simultaneous self-diagnosis of an entire system, simultaneous data monitor for multiple systems, data recorder, and oscilloscope capability.

 

4.Enhanced data management with improved laptop PC

New features such as adoption of color-screen and large-screen monitor allow viewing of large amounts of information altogether for enhanced data management

 

5.Map data update function for hard-disk navigation system

Through high-speed data update system, it is possible to update map data in approximately 20 minutes with the new CARWINGS navigation system (hard-disk) equipped in the all-new Skyline and other future products.
(1) CONSULT:Computerized On-Board System Universal Tester.
CONSULT introduced in 1989, CONSULT-II introduced in 1999. CONSULT-III is 3rd generation model.
(2) Communication distance: radius of 5m approx.

 

In short, consult 3 plus nissan  can do:

  1. Scantool Diagnostics for all Nissan,Infiniti GTR and Renault
    2. ECU Reprogramming:for all Nissan Infiniti GTR and Renault
    3. Immobi and Smart key for all Nissan Infiniti GTR and Renault
    4. Nissan GTR for Nissan GTR Diagbostics Immobi and Reprogramming
    5. Electromobiles car for Nissan Electromobiles car Diagbostics Immobi and Reprogramming

 

So, You’ll be able to perform servicing, tuning and diagnostic work on the Nissan flagship model R35 GT-R.
Programming keys, ecu reprogramming and diagnostic work on all Nissan and infinity cars.

 

consult3-plus-ecu-reprogrammingconsult3-plus-iconconsult3-plus-languageconsult3-plus-menu

Original:http://blog.obdexpress.co.uk/2016/08/30/nissan-consult-3-...

How to solve OM123 OBDII coder reader “Linking Error”

Autophix OM123 OBDII EOBD coder reader might display “LINKING ERROR” when it fails to communicate with the vehicle’s ECU.

 

if LINKING ERROR pops up, please try to:

– verify the engine is ON

– check OM123 scanner OBDII connector is well connected to DLC on the vehicle

– make sure the vehicle is OBDII compliant

– turn ignition OFF and wait for 10 seconds nearly; then turn ignition ON and press ENTER to the main menu for diagnosis

 

How to use OM123 code scanner for OBDII diagnosis:

1 turn ignition on

2 locate the 16 pin data link connector (DLC) on the car

om123-code-reader-DLC-connector

Usually, the DLC connector (left) is located in 12 inches from the center off the dash, under or around the driver side for most cars.

3 plug OM123 reader connector into DLC

4 turn ignition ON

om123-code-reader-manual-1

5 press ENTER to the main menu and then press UP/DOWN button for diagnosis

Diagnostic menu:

om123-code-reader-manual-2

Read codes

Erase codes

Live data

View freeze frame

I/M readiness

Vehicle info

om123-code-reader-connecting

source:http://yellowbend.blogspot.com/2016/08/how-to-solve-autop...