topblog Ivoire blogs

14/04/2016

Chevrolet Mileage Correction with Digiprog 3 v4.94

Hello, guys. I made a small intruction here for you all on how to correct or change the mileage of Chevrolet Trailblazer using Digiprog 3 odometer programmer.

Disclaimer:
The guide is only for educational purposes and not by any means to be wrongly or criminally used for cheating or manipulating with cars mileage for sales purposes

Tool used:
Digiprog 3 v4.88+ st01/2 adapter

digiprog-3jpg.jpg

Model:
Chevrolet Trailblazer LTZ 2002

Here are my steps to change km:
connect serial port cable first then AC adapter
plug to the Digiprog 3 unit, then power it up

digiprog-3-change-km-Chevrolet (1).jpg

digiprog-3-change-km-Chevrolet (2).jpg

press the tick button to continue

digiprog-3-change-km-Chevrolet (3).jpg
press 1 for the password and press the tick button

digiprog-3-change-km-Chevrolet (4).jpg
choose EEPROM to read the chip

digiprog-3-change-km-Chevrolet (5).jpg

digiprog-3-change-km-Chevrolet (6).jpg

digiprog-3-change-km-Chevrolet (7).jpg
choose EEPROM-> READ

digiprog-3-change-km-Chevrolet (8).jpg

digiprog-3-change-km-Chevrolet (9).jpg
choose 95

digiprog-3-change-km-Chevrolet (10).jpg
choose s 95020

digiprog-3-change-km-Chevrolet (11).jpg
reading the chip

digiprog-3-change-km-Chevrolet (12).jpg
chip data

digiprog-3-change-km-Chevrolet (13).jpg
choose FILE-> SAVE, incase that something goes wrong

digiprog-3-change-km-Chevrolet (14).jpg
name the file and press the tick button to save

digiprog-3-change-km-Chevrolet (15).jpg
disconnect the power and restart Digiprog 3 to check the file
connect AC adaoter and plug again to start the unit
unplug the serial cable to verify the saved file and make sure that the unit is reading from saved file (NOT directly form the chip)

digiprog-3-change-km-Chevrolet (16).jpg
press the tick button
press 1 for the password and press the tick button
choose EEPROM
choose FILE-> SHOW, to open the list of saved chip data files

digiprog-3-change-km-Chevrolet (17).jpg
choose the saved file with the name
the old chip data is fine, then proceed (DELETE, then cross button)

digiprog-3-change-km-Chevrolet (18).jpg

digiprog-3-change-km-Chevrolet (19).jpg

digiprog-3-change-km-Chevrolet (20).jpg
unplug

digiprog-3-change-km-Chevrolet (21).jpg
connect to the chip

digiprog-3-change-km-Chevrolet (22).jpg
restart Digiprog 3
choose CAR/TRUCK

digiprog-3-change-km-Chevrolet (23).jpg
use up and down arrows to choose CHEVROLET->TRAILBLAZER

digiprog-3-change-km-Chevrolet (24).jpg

digiprog-3-change-km-Chevrolet (25).jpg
make sure the serial cable is connected in a right way
press the tick button to start reading the chip data

digiprog-3-change-km-Chevrolet (26).jpg
OLD mileage written in the top right corner and put the new mileage and press the tick button to write on the chip

digiprog-3-change-km-Chevrolet (27).jpg

digiprog-3-change-km-Chevrolet (28).jpg

digiprog-3-change-km-Chevrolet (29).jpg
Done!

Note:
- always save the old chip data in the Digiprog 3 programer for any thing goes wrong so you can write it back if needed or even if someone fried his chip and needed to install new chip it will be really easy to write it back
- if you needed any time to restart again or your Digiprog3 got stuck while working simply take out the Power plug and reinsert it again to restart the programmer (Never ever unplug AC power Plug when odometer correction tool is reading or Writing on the EEPROM CHIP otherwise you will destroy it)

05:09 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

Les commentaires sont fermés.