topblog Ivoire blogs

05/02/2016

Perfect hardware Version ICOM for BMW FAQ

ICOM is the best diagnose and programming tool for BMW new and old models. Multi language. Perfect version is more steady, fast software running speed, adds more special functions.

Here is some FAQ for Perfect best V2015.10 BMW ICOM A2+B+C Diagnostic Programming Tool

part 1:
Q: I'm searching a tool which I can use to reset EWS, DME for E/F series, so I can apply used controll units. I already purchased Icom. Problem is the original bmw-software dont support DME, EWS coding on already used control units. That means I searching for a tool which can change VIN on control units.

A: Our icom can meet your needs. If your car is before 2015, then choose our 2015.1 icom software to do. our software has the engineer version. It can do the coding function, but the matter is you need to know how to use engineer version do it.this one has the single programming function. It can do coding. For original software, it does not have the single programming function. Original software support full system programming automatically, not single programming.

For original bmw software, if one ECU is broken, then it stops programming, it only support programming when all ECU meet its standard. and canceled many special function.

part 2:
Q: I get the V2014.12 BMW ICOM A2 interface and HDD,but get this error"database version mismach, the found database version are not compatible", could you help?
A: Please set the ISTA/D language as Amercian English.

part 3:
Q: Can you tell me the difference tool of the 2014.09 BMW ICOM A2 + B + C diagnosis and programming Tool with other BMW ICOM device?
A: The 2014.09 BMW ICOM A2+B+C Diagnostic & Programming Tool(SP168) can support wifi function. The other tool BMW ICOM can not do it. There is one wifi chip is the interface.

part 4:
When i install the software on my laptop, i meet this prompt "Device is configuration. do not change anything on network. Network changes may cause an inconsistant system and requires a reboot." how to solve it?

perfect-bmw-icom-a2-b-c-error-solution-s-1.jpg
A: Solution:
1) Change your laptop time to current day. Look at the right buttom of the interface. This time is over 10000. Normally this time should not over 10000.
2) Setup your HDD mode to "AHCI"

perfect-bmw-icom-a2-b-c-error-solution-s-2.jpg
3) Follow our BMW ICOM software operation video to do.
https://www.youtube.com/watch?v=d9MoiF9H1ek

If still cannot solve, then problem is that your laptop is not compatible with our software hdd. Please change another laptop to use. Or you can buy our laptop, we install the software and test it, then send it to you.

What should you pay attention to use this BMW ICOM:
1) DO NOT connect the internet or original factory servier.
2) DO NOT change the icom software setup
3) Change the PC time to the current time
4) NEVER TRY TO CRACK OR COPY OUR HDD.

12:50 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

Les commentaires sont fermés.